Scion-Tech SC08.4100 User manual
User Manual
Version 1.2
User ManualScion Tech SC08.4100
HDMI over IP Extender
With Looped Output
User ManualScion Tech SC08.4100
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric
shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Contents
1. Introduction....................................................................................................................................... 2
2. Product Features................................................................................................................................ 2
3. Package Contents............................................................................................................................... 2
4. Specifications.................................................................................................................................... 3
5. Front Panel Description..................................................................................................................... 4
6. Rear Panel Description...................................................................................................................... 4
7 . Application Drawing 1 (one to one extender).................................................................................. 5
8. Application Drawing 2 (one to many using 1G Ethernet Switch)..................................................... 6
9 . Maintenance and Warranty............................................................................................................... 7
Page 1
1. Introduction
HDMI over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display
device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to
100m/328ft between encoder and decoder via CAT5e/6 cable. It offers configurable high quality, low-bandwidth
H.265 compression video. The resolution up to 1920 x 1200@ 60Hz YCbCr 4:4:4. It also supports HDMI loop
output.
HDMI over IP Extender includes two units: Encoder unit and Decoder unit. Encoder unit is used to capture the
HDMI input with IR blaster signal and carries the signals via one effective CAT5e/6 cable, and Encoder unit can
also support HDMI loop output. The Decoder unit is responsible for outputting HDMI signal from Encoder unit
with IR receiver signal. The product offers the most convenient solution for HDMI extension over a single
CAT5e/6 and is the perfect solution for any application.
2. Features
●Extends up to 100m over CAT5e/6
●HDMI 1.4b, HDCP 1.4
●Supports 10.2Gbps
●1080p/60Hz, YCbCr 4:4:4
●LPCM 2.0
●Looped HDMI output on transmitter
●IR Pass-Through for source control
●Uses 1G Ethernet Switches, Routers
●H.265 Encoding
3. Package contents
1. 1 x Transmitter (ordered seperatley)
2. 1 x Receiver (ordered seperatley)
3. 1 x IR Sender Cable
4. 1 x IR Emitter Cable
5. 2 x Power Adaptor 5V/1A
6. User Manual
Page 2
User ManualScion Tech SC08.4100
4. Specifications
Page 3
User ManualScion Tech SC08.4100
Connectivity
Transmitter
HDMI Input: 1 x HDMI Type A, 19-Pin Female
HDMI Output (Looped): 1 x HDMI Type A, 19-Pin Female
CAT5e/6 Output: 1 x RJ45 Data Socket
Infra-Red Out: 1 x 3.5mm Jack Socket
Power: 1 x 2.1mm DC Jack
Receiver
CAT5e/6 Input: 1 x RJ45 Data Socket
Infra-Red Input: 1 x 3.5mm Jack Socket
HDMI Output: 1 x HDMI Type A, 19-Pin Female
Power: 1 x 2.1mm DC Jack
Signal
Signal Input: HDMI
Standards: HDMI 1.4b, HDCP 1.4
Bandwidth: 10.2Gbps
Video Resolutions: 1080p/60Hz, 4:4:4
Colour Space: RGB/YCbCr 4:4:4, YCbCr 4:2:2
Colour Depth: 8-bit
Audio: LPCM 2.0, 48KHz
Infra-Red: Wide Bandwidth, Frequency 20KHz to 60KHz (940nm)
Power
Type: 2 x AC to DC Mains Adaptor (Tx and Rx require power)
Input: 100~240V AC 50/60Hz
Output: Transmitter 5V/1A
Consumption: Transmitter 1.5W and Receiver 1.25W
Environment
Operating Temperature: -0° to 40°C
Storage Temperature: -20° to 60°C
Operating Humidity: 20 to 90% RH (no condensation)
Dimensions: Tx = (W) 61 x (D) 88 x ( H) 16, Rx = (W) 61 x (D) 88 x ( H) 16
Weight: Tx = 155g, Rx = 150g
Colour: Black
ESD: Human Body - +/-8kV, (air gap discharge) & +/-4kV (contact discharge)
Safety and Emissions: CE, FCC, RoHS
5. Front Panel Description
User ManualScion Tech SC08.4100
Page 4
5
1 2 3 4 6 7
Number Name Function / Description
1 HDMI Out Looped HDMI output for connection to a local screen.
2 HDMI In Connect the HDMI source device using a Premium High Quality HDMI cable to
achieve the best results.
3 Reset Button Reset the product including IP address and video resolution to 1080p/60Hz.
4 CAT5e/6 Out Connect to CAT5e/5 cabling for direct end to end or via 1G Ethernet switch or router
for a one to many configuration.
5 IR Out Connect the IR Emitter cable and place the emitter over the source device IR sensor.
6 Link LED Flashes Blue when connected to PC or LAN device.
6 Power LED Illuminates Blue when powered on.
7 DC Jack Connect the 5V/1A power supply
6. Rear Panel Description
51 2 3 4 6 7
Number Name Function / Description
1 HDMI Out Connect the HDMI screen using a Premium High Quality HDMI cable.
2 Reset Button Reset the product including IP address and video resolution to 1080p/60Hz.
3 CAT5e/6 In Connect to CAT5e/5 cabling for direct end to end or via 1G Ethernet switch or router
for a one to many configuration.
4 IR In Connect the IR Sender cable and place the receptor in line of sight of the IR remote.
5 Link LED Flashes Blue when connected to the encoder or LAN device.
6 Power LED Illuminates Blue when powered on.
7 DC Jack Connect the 5V/1A power supply.
CAT5e Out IR Out DC/12V
8
HDMI Out
Reset
HDMI Out HDMI In Reset
CAT5e In IR In DC/12V
7. Application Drawing 1
Transmitter and Receiver connected using a CAT5e/6 cable.
Page 5
User ManualScion Tech SC08.4100
CAT5e Out IR Out DC/12V
HDMI Out HDMI In Reset
CAT5e In IR In DC/12V
HDMI Out Reset
Satellite Receiver
Local Display Remote Display Satellite Receiver
Remote
Encoder / Transmitter Decoder / Receiver
100m CAT5e/6
8. Application Drawing 2
Transmitter and Receiver connected using 1G Ethernet Switch.
User ManualScion Tech SC08.4100
Page 6
HDMI Out HDMI In Reset CAT5e Out IR Out DC/12V
HDMI Out Reset CAT5e In IR In DC/12V
Satellite Receiver
Local Display
Encoder / Transmitter
Decoders / Receivers
CAT5e In IR In DC/12V
CAT5e In IR In DC/12V
HDMI Out Reset
CAT5e In IR In DC/12V
Remote Display 1
Remote Display 2
Remote Display 20
Page 7
9. Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.
Servicing
Damage requiring service: This product should be serviced by a qualified service engineer if:
●The DC power cord or AC adaptor has been damaged.
●Objects or liquids have entered the housings.
●The product has been exposed to rain.
●The product has stopped working or shows signs of significant change in operating performance or function.
●The unit has been dropped or severely damaged externally.
Servicing personnel: Do not attempt to service the product beyond that described in these instructions. Refer all
other servicing to authorised serving personnel.
Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the manufacture
or parts that have the same characteristics as the original parts. Unauthorised substitutes may result in fire, electric
shock or other hazards.
Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is in
proper working condition.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our Company (referred to
as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2 years) which starts
with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product with new
or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be
made by the warrantor.
During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts" warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited
Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt
or other proof of original purchase date is required for Limited Warranty service.
Returning a Product
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Include a letter detailing the complaint and provide a day time phone number and/or email address where you can
be reached.
User ManualScion Tech SC08.4100
Page 8
Limited warranty limits and exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which
result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, maladjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or service by anyone other than a Factory Service centre or other authorized service engineer, or
damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other
recorded content. The items listed are not exclusive, but are for illustration only).
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY. This returns policy does not affect your legal rights. Details of your legal rights are available
from Trading Standards or Citizens Advice Consumer Service.
Scion Tech Limited
Thatcham, Berkshire, United Kingdom
User ManualScion Tech SC08.4100
Table of contents
Other Scion-Tech Extender manuals
