Scotsman CME256 Manual

1. Remove all ice from the bin.
2. Remove the front panel.
3. Push and release the
Harvest button.
4. Wait for the machine to
finish the Harvest cycle and
stop.
5. Remove the evaporator
cover.
6. Push and release the
Clean button. The Clean
indicator light will be
blinking, and the pump will
restart.
7. Pour 12 ounces of
Scotsman Ice Machine
Cleaner into the reservoir
water. Return the
evaporator cover to its
normal position.
Basic Ice Machine Cleaning and Sanitizing Procedures*
Models: CME256, CME506, CME656, CME806
Step 3: Push and Release the
Harvest Button
Step 5: Remove Evaporator Cover
Step 6: Push and Release the
Clean Button
Step 7: Pour Ice Machine Cleaner
Into the Reservoir
* Other components will require periodic cleaning and sanitizing. The complete procedure is available on the machine or in its manual.

8. Wait 10 minutes while the
cleaning solution circulates.
9. Push and release the
Clean button again. This
starts the rinsing process.
The Clean indicator light will
be ON. Note: The rinse
process flushes any residual
cleaner out of the ice
machine’s water system.
10. Wait 20 minutes for the
rinsing process to remove
any residual cleaning
solution.
11. Push the off button to
switch the machine off.
12. Go to the next step to
sanitize the machine or go to
step 21 to finish the cleaning
process.
13. Mix 2 gallons of Sanitizer
solution. Follow local codes
and sanitizer instructions.
Note: Some sanitizers must
be rinsed off and some must
air dry.
14. Push and release the
Clean button.
15. Pour 16 ounces of
Sanitizer solution into the
reservoir water.
16. Wait 10 minutes while the
sanitizing solution circulates.
17. Push and release the
Clean button again. This starts
the rinse process. Sanitize the
ice storage bin while waiting.
18. Wait 20 minutes for the
rinsing process to remove any
residual sanitizer.
19. Push the off button to
switch the machine off.
20. Remove the evaporator
cover and spray or wash all
interior surfaces of the
freezing compartment
including the evaporator
cover with sanitizer solution.
21. Return the evaporator
cover to its original position.
Push and release the Freeze
button.
22. Return the front panel to
its normal position and secure
it to the machine with the
original screws.
Step 9: Push and Release the Clean
Button
Step 11: Push and Release the Off
Button
Step 14: Push and Release the
Clean Button
Step 21: Push and Release the
Freeze Button
Use the balance of the sanitizing
solution to sanitize the interior of
the ice storage bin.
17-2867-01