Scott Living 864253 User manual

CREATE YOUR PERFECT VANITY
Choose from various sizes & finishes
Canterbury Bathroom Vanity
Available at Lowes.com. See Store Associate for Details.
( 36-IN W x 22-IN D- 35-IN H)
864253
864255
864256
864823
864250
864251
864252
864822
864260
864261
864262
864825
864257
864258
864259
864824
White Finish Base, White Engineered Top Black Birch Finish Base, White Engineered Top
Black Birch Finish Base, Carrara Marble Top
Black Birch Finish Base, Carrara Engineered Top
Light Grey Finish Base, White Engineered Top Mahogany Finish Base, White Engineered Top
White Finish Base, Carrara Marble Top
Light Grey Finish Base, Carrara Marble Top Mahogany Finish Base, Carrara Marble Top
White Finish Base, Carrara Engineered Top
White Finish Base, Black Granite Top Black Birch Finish Base,, Black Granite Top
Light Grey Finish Base, Carrara Engineered Top
Light Grey Finish Base, Black Granite Top
Mahogany Finish Base, Carrara Engineered Top
Mahogany Finish Base, Black Granite Top
ITEM#
ITEM#
WHITE
LIGHT GREY
36-IN Vanity Base and Top
Date Purchased _______________________
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department at
1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday.
www.greentouchhome.com
TM
ITEM#
ITEM#
BLACK BIRCH
MAHOGANY

1227VT-36-903 36" Carrara Engineered Top
1227VB-36-201 36" White Finish Vanity Base & Sink
1227VB-36-202 36" Mahogany Finish Vanity Base & Sink
1227VB-36-240 36" Black Birch Finish Vanity Base & Sink
1227VB-36-242 36" Light Grey Finish Vanity Base & Sink
1227VT-36-900 36" Carrara Marble Top
1227VT-36-901 36" White Engineered Top
MODEL NUMBER DESCRIPTION
1227VT-36-904 36" Black Granite Top
2
TM

AA BB CC DD EE
PART DESCRIPTION QUANTITY
A Vanity 1
B Top 1
C Backsplash 1
D Sink 1
E Top Drawer
(preassembled to Vanity (A))
1
F Bottom Drawer
(preassembled to Vanity (A))
1
3
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
Washer
Qty. 4
Sink Clamp
Qty. 4
Touch Up Pen
Qty. 1
Lock Washer
Qty. 4
Bolt
Qty. 4
PACKAGE CONTENTS
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• Some steps are more easily handled with 2 adults.
CAUTION
• Use care when assembling the vanity; take your time and follow the assembly instructions closely.
A
D
B
E
F
C

4
INSTALLATION INSTRUCTIONS
2
1. Place T
op (B) and Backsplash (C) face down
onto a scratch free surface such as a
foam sheet that came in the packaging.
2. Apply silicone adhesive (not included) to the top
edge of Sink (D). With the help of another adult,
lower the sink onto the back side of the stone
top. Make sure the sink over-flow hole is facing
the front of stone top. Be sure to align the sink
well with the stone top cut out allowing for equal
stone overhang on the front, back and sides of
the ceramic sink (D).
Note: To install the sink onto top correctly,
ensure the two “Back” stamps on the sink and
on the sub-top frame are on the same side,
and also make sure that the lines marked on
the sink and on the sub-top frame line up.
.
1
Foam
Sheet
Foam
Sheet
1
2
B
C
D
B
2
1
C
Foam
Sheet
MDF
Back
Back

5
INSTALLATION INSTRUCTIONS
3. Place the sink clamps in the proper
position above the pre-threaded holes in
the stone top. Using Bolts (AA) Lock
Washers (EE) and Washers (BB) secure
Sink Clamps (DD) to the bottom of the
Stone Top (B).
Tip: check that the sink placement is well
centered front to back and side to side of
the stone top cut out before allowing the
silicone adhesive to dry. If the sink is not
centered well unscrew sink clamps,
readjust the sink position and re-tighten
the sink clamps.
4. To remove drawers (E,F) preassembled in
vanity (A), fully extend drawers. Locate
plastic levers under drawer box on metal
glide tracks at left and right sides of drawer
box. To
disengage drawer box from glides,
push on plastic levers. Then, gently lift drawer
up to remove it from vanity (A).
3
4
Hardware Used
AA Bolt x 4
BB Washer x 4
x 4
DD Sink Clamp
EE Lock Washer x 4
AA
EE
BB
DD
F
E

6
INSTALLATION INSTRUCTIONS
5. Clean area where the vanity (A) will be
permanently located prior to beginning
installation, ensuring the vanity (A) will not
interfere with any water supply and drain lines
once mounted.
Locate wall studs and mark locations. With the
help of another adult, place completed Vanity
Cabinet Assembly to its final location. Adjust
the height of the Vanity Cabinet (A) by
twisting the adjustable leveler foot pins on the
bottom of each leg. Twist clockwise to
decrease height or twist counter-clockwise to
increase vanity height.
6. Using hardware appropriate for your wall type
(not included), secure Vanity Cabinet (A) to
two wall studs anywhere through the Vanity
Mounting Plates. Be careful not to disturb
any electrical or water lines that may be
concealed in the wall.
5
6
Mounting
Plate

7
INSTALLATION INSTRUCTIONS
7. Apply silicone adhesive to the top edge of the
wood cabinet. With the help of another adult,
gently lower down the stone top with
assembled sink onto the cabinet. Make sure
the stone top is flush with the back side of the
wood cabinet and the stone overhang is equal
on both sides over the wood cabinet left and
right side walls. Remove any excess adhesive
before allowing to dry.
Tip: it may be easier to install the faucet and
or drain assembly (not included) before
securing the stone top to the wood cabinet.
8. Locate Top drawer (E) and Bottom drawer (F)
and set aside. Fully extend lower drawer glide
tracks. With the help of another adult, hold the
extended glide in one hand and the drawer in
the other. Gently place the back of the drawer
box into the metal hook located on the back
of the drawer track. Once the glide hook has
been slide into the hole in the back of the
drawer box, gently lower the drawer box down
onto the extended glide tracks. At the same
time depress both of the glide handles and
allow the drawer box to fully rest on the glide
tracks. Test to see if the drawer box is fully
engaged. If the drawer box can still be lifted
off the glide track then start again from the
beginning. Never force anything or else
damage to the drawer or glide hardware could
result. Repeat for both drawers. The drawers
location can be adjusted slightly up or down
by twisting the adjuster knob next to the glide
handles.
7
8

8
INSTALLATION INSTRUCTIONS
9. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess adhesive before allowing
to dry.
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
if not already done at step 7. Per the
manufacturers’ instructions to complete the
installation.
9
C
B
1

9
CARE AND MAINTENANCE
WARRANTY
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The ceramic sink can be cleaned using standard ceramic cleaning agents available at your local
supplier.
• Tips for using touch-up pen (CC): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
IMPORTANT
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water
and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not
responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local
home store. Follow the manufacturer’s directions on how to apply.
The manufacturer warrants this item against defects in materials and workmanship for a period of
one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
. The
is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection with
product use or performance except as may otherwise be accorded by law. The manufacturer
disclaims any and all implied warranties.
manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain
the stone top. The manufacturer is not accountable whatsoever for product installation during the
warranty period. There
modified

REPLACEMENT PARTS FOR 1227VB-36-201
10
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
C Backsplash PU17-36EW-BS
D Sink PU17-420*310-Rect-S
E Top Drawer 1227VB-36-201-001
F Bottom Drawer 1227VB-36-201-002
AA Bolt BTSET-2INx12
BB Washer BTSET-2INx12
CC Touch Up Pen OF-0010
DD Sink Clamp PU17-65x20-SB
EE Lock Washer BTSET-2INx12
FF Drawer Glide PU16-14x3-GS
C
BB EEAA CC FF DD
D
E F

REPLACEMENT PARTS FOR 1227VB-36-202
11
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
C Backsplash PU17-36BGrte-BS
D Sink PU17-420*310-Rect-S
E Top Drawer 1227VB-36-202-001
F Bottom Drawer 1227VB-36-202-002
AA Bolt BTSET-2INx12
BB Washer BTSET-2INx12
CC Touch Up Pen W3350A
DD Sink Clamp PU17-65x20-SB
EE Lock Washer BTSET-2INx12
FF Drawer Glide PU16-14x3-GS
C
BB EEAA CC FF DD
D
E F

REPLACEMENT PARTS FOR 1227VB-36-240
12
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
C Backsplash PU17-36ECAR-BS
D Sink PU17-420*310-Rect-S
E Top Drawer 1227VB-36-240-001
F Bottom Drawer 1227VB-36-240-002
AA Bolt BTSET-2INx12
BB Washer BTSET-2INx12
CC Touch Up Pen OX-0180Y
DD Sink Clamp PU17-65x20-SB
EE Lock Washer BTSET-2INx12
FF Drawer Glide PU16-14x3-GS
C
BB EEAA CC FF DD
D
E F

REPLACEMENT PARTS FOR 1227VB-36-242
13
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
C Backsplash PU17-36CAR-BS
D Sink PU17-420*310-Rect-S
E Top Drawer 1227VB-36-242-001
F Bottom Drawer 1227VB-36-242-002
AA Bolt BTSET-2INx12
BB Washer BTSET-2INx12
CC Touch Up Pen OF-0120R
DD Sink Clamp PU17-65x20-SB
EE Lock Washer BTSET-2INx12
FF Drawer Glide PU16-14x3-GS
C
BB EEAA CC FF DD
D
E F