Scott Living Robinson Bathroom Floor Cabinet User manual

( 24-IN W x 18-IN D x 72-IN H)
24-IN Floor Cabinet
Date Purchased _______________________
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department at
1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday.
www.greentouchhome.com
welcoming • sophisticated • inspiring

1192FC-24-201 24" White Finish Floor Cabinet
1192FC-24-242 24" Light Gray Finish Floor Cabinet
1192FC-24-245 24" Coffee Oak Finish Floor Cabinet
MODEL NUMBER DESCRIPTION
2

3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Cabinet 1
BWall Mounting Spacer Bar
(preassembled to Cabinet (A)) 1
C Shelf 3
HARDWARE CONTENTS
AA
Shelf pin
Qty.12
Touch-up pen
Qty.1
BB
B
A
C
C
C

4
INSTALLATION INSTRUCTIONS
PREPARATION
Estimated Assembly Time: 20 minutes (24 hours for adhesive to dry).
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
this product.
WARNING
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors,
power drill with drill bit and measuring tape.
1. If there is baseboard at the location where you
want to install floor cabinet then directly go to
step 2. If there isn't a baseboard at the location,
please remove the wall mounting spacer bar (B)
from back of cabinet by unscrewing the screws
on the back of the wall mounting spacer bar then
go to step 2.
CAUTION
• Some steps are more easily handled with two adults.
• Before installation, carefully use scissors or utility knife to cut and unwrap all parts. Make sure
you DO NOT discard the hardware.
• Use care when installing your new floor cabinet; take your time and follow the installation
instructions closely.
1
2
B
A
1

5
3. Insert shelf pins (BB) at desired height, ensuring
they are level. Place shelves (C) on top of shelf
pins (BB).
2. Clean area where the cabinet (A) will be
permanently located prior to beginning
installation, ensuring the cabinet (A) will not
interfere with any plumbing or electrical lines
once mounted.
Locate wall studs and mark locations. With the
help of another adult, place completed cabinet
assembly to its final location. Adjust the height
of the cabinet (A) by twisting the adjustable
leveler foot pins on the bottom of each leg. Twist
clockwise to decrease height or twist counter-
clockwise to increase cabinet height.
Using hardware appropriate for your wall type
such as cabinet screw or toggle bolt (not
included), secure cabinet (A) to preferably two
wall studs anywhere through the cabinet
mounting bar. Be careful not to disturb any
electrical or water lines that may be concealed
in the wall.
INSTALLATION INSTRUCTIONS
Hardware Used
Shelf Pin x 12
BB
Baseboard
2
A
3
1
BB
2
C

5. Locate drawers and set aside. Fully extend
lower drawer glide tracks. With the help
of another adult, hold the extended glide in one
hand and the drawer in the other. Gently
place the back of the drawer box into the
metal hook located on the back of the drawer
track. Once the glide hook has been slid into
the hole in the back of the drawer box, gently
lower the drawer box down onto the extended
glide tracks. At the same time depress both of
the glide handles and allow the drawer box to
fully rest on the glide tracks. Test to see if the
drawer box is fully engaged. If the drawer box
can still be lifted off the glide track then start
again from the beginning. Never force
anything or else damage to the drawer or
glide hardware could result. Repeat for
remaining drawers. The drawers location can
be adjusted slightly up or down by twisting the
adjuster knob next to the glide handles.
4. To remove drawers preassembled in cabinet
(A). Fully extend drawers, locate plastic levers on
metal glide tracks at left and right sides of
drawer box, push on plastic levers on both
sides at the same time, to disengage drawer
box from the glides, Then gently lift the drawer
up to remove it from the glide tracks.
INSTALLATION INSTRUCTIONS
6
A
4
A
5

WARRANTY
CARE AND MAINTENANCE
• Dust the floor cabinet regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the floor cabinet with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
The manufacturer warrants this item against defects in materials and workmanship for a period
of one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer is not accountable whatsoever for product installation during the warranty period.
There is no further expressed warranty. The manufacturer shall not be legally responsible for
incidental, consequential or special damages arising at or in connection with product use or
performance except as may otherwise be accorded by law. The manufacturer disclaims any and
all implied warranties.
7

8
REPLACEMENT PARTS LIST FOR 1192FC-24-201
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
T-1007
PUDTC-12x3-HANDLE
Shelf pin B1044
AA
Drawer Glide
BB
CC
Leveler
DD
EE
PART DESCRIPTION PART#
C
Touch-up pen
1192FC-24-201-002
E 1192FC-24-201-003
OF-0010
Door Pull PU-1192-BN
Shelf
B 1192FC-24-201-001
Wall Mounting Spacer Bar
Bottom Drawer Front
F 1192FC-24-201-004
Top Drawer Front
AA CC DD EEBB
B
C
F
E

9
REPLACEMENT PARTS LIST FOR 1192FC-24-242
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
T-1007
PUDTC-12x3-HANDLE
Shelf pin B1044
AA
Drawer Glide
BB
CC
Leveler
DD
EE
PART DESCRIPTION PART#
C
Touch-up pen
1192FC-24-242-002
E 1192FC-24-242-003
OF-0120R
Door Pull PU-1192-BN
Shelf
B 1192FC-24-242-001
Wall Mounting Spacer Bar
Bottom Drawer Front
F 1192FC-24-242-004
Top Drawer Front
B
C
F
E
AA CC DD EEBB

10
REPLACEMENT PARTS LIST FOR 1192FC-24-245
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
T-1007
PUDTC-12x3-HANDLE
Shelf pin B1044
AA
Drawer Glide
BB
CC
Leveler
DD
EE
PART DESCRIPTION PART#
C
Touch-up pen
1192FC-24-245-002
E 1192FC-24-245-003
OX-0940S
Door Pull PU-1192-BN
Shelf
B 1192FC-24-245-001
Wall Mounting Spacer Bar
Bottom Drawer Front
F 1192FC-24-245-004
Top Drawer Front
B
C
F
E
AA CC DD EEBB