Belnick BT-7615-BK-CURV-GG User manual

Customer Service email: [email protected] | phone: [phone]
BT-7615-BK-CURV-GG / BT-7615-BN-CURV-GG
Thank you for your purchase!
Contemporary Leather Recliner and
Ottoman with Swiveling
Maple Wood Base
ASSEMBLY INSTRUCTIONS
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to doso may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware
(where included) to help prevent the unit from tipping and causing accidental injury, instability, death or
damage. The tipping restraint is intended only as a safety measure, it is not a substitute for proper adult
supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall
Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Online Assembly Instructions: http://ftp.flashfurniture.com/AssemblyInstructions/BT-7615-BN-CURV-GG.pdf

(2)
(9)
(5)
(1)X1
(7)X2 (8)X4 (9)X4 (10)X1 (11)X1 (12)X1 (13)X1
(3)X 1 (4)X 1 (5)X4 (6)X 4
STEP 1
STEP 3
STEP 5
STEP 2
STEP 4
PARTS
(2)X 1(L )X1(R )
M6*45mm
M8*25mm
6.5*18*1.5mm
(7)
(1)
(10)
(4)
(6)
(8)
(3)
(6)
(8)
M6*50mm
6.5*15*1.5mm
Attach the ottoman base (Part 4) to ottoman cushion (Part 3)
using bolts (Part 6) and washers (Part 8)
Attach left and right arm cushions
(Part 2L and 2R) to left and right
wooden arm frames using bolts (Part
5) and washers (Part 9)
Insert recline
control knob
(Part 10) and
turn clockwise
to tighten