TEMPLE & WEBSTER GLDRCWNT User manual

ASSEMBLY INSTRUCTIONS
GLDRCWNT
''Read these instructions and follow steps carefully to ensure you assemble
the product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product.”
''CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.”
PART LIST HARDWARE LIST
ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
A 1
2B
STEP 1: Put the chair on the floor and pull the chair frame (C) (as the arrow direction shown)
1PC 2PCSSCREW M6X25 2PCS
ALLEN KEY
STEP 2: Attach the back (D) to the chair frame (C). Then insert screws (1) through the back
(D) into the chair frame (C). Fully tighten with allen key (2).
C
D1PC
2PCS
1PC
E2PCS
C1
2D
C
BACK FABRIC
SEAT FABRIC
BACK
CHAIR FRAME
PLASTIC RODS

ASSEMBLY INSTRUCTIONS
GLDRCWNT
''Read these instructions and follow steps carefully to ensure you assemble
the product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product.”
''CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.”
PART LIST HARDWARE LIST
ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
A 1
2B
STEP 3: Attach the back fabric (A) to the chair frame (C).
1PCBACK FABRIC 2PCSSCREW M6X25 2PCS
ALLEN KEY
STEP 4: Attach the seat fabric (B) to the chair frame (C).
C
D1PC
2PCS
SEAT FABRIC
BACK
1PC
E2PCS
A
C
B
C
CHAIR FRAME
PLASTIC RODS

ASSEMBLY INSTRUCTIONS
GLDRCWNT
''Read these instructions and follow steps carefully to ensure you assemble
the product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product.”
''CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.”
PART LIST HARDWARE LIST
ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
A 1
2B
STEP 5: Insert the plastic rods (E) into the seat fabric (B) assembled in Step 4 (as the arrow
direction shown)
1PC 2PCSSCREW M6X25 2PCS
ALLEN KEY
STEP 6: Place the assembled chair upright on a level surface, then fully tighten all
bolts.Your chair is now ready for use.
C
D1PC
2PCS
1PC
E2PCS
E
BACK FABRIC
SEAT FABRIC
BACK
PLASTIC RODS
CHAIR FRAME