SCOTT MILLER SM-V6000 User manual

SCOTT MILLER PRODUCT USER MANUAL
Page 1 | 12
Instruction Manual &
Product E-Warranty
Scott Miller Cordless Vacuum Cleaner
Model: SM-V6000

SCOTT MILLER PRODUCT USER MANUAL
Page 2 | 12
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE AND RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Overview of Package Content
1 x Scott Miller SM-V6000 Vacuum Cleaner
1 x Aluminium Tube
1 x Power Adaptor
1 x Motorised Floor Brush
1 x Crevice Tool
1 x Soft Brush
1 x Wall Mount (Hanger)
1 x Wall Screw
Important Safety Instructions
To avoid potentially fatal electric shocks:
§ Do not charge or use the appliance outdoors.
§ Never use the vacuum cleaner if the cable, plug or casing are damaged.
§ To avoid unforeseen circ umstances , use only power cables supplied by the
manufacturer /or replace damaged power cables only with those provided by
manufacturer.
§ Repairs should only be carried out by a service agent or a suitably qualified person in
accordance with relevant safety regulations. Under no circumstances should
Purchasers attempt to repair the appliance themselves. Repairs or replacement of
parts that are not carried out by a specialist workshop could lead to physical injuries.
§ Before switching on the vacuum cleaner, ensure that the main voltage corresponds to
the voltage indicated in the technical data for the appliance.
§ Never touch the power supply or the appliance with wet or damp hands.
§ Do not use the adapter with an extension cable; connect the power adapter directly
to a power socket.

SCOTT MILLER PRODUCT USER MANUAL
Page 3 | 12
To avoid the risk of injury:
§ Do not change any accessories while the appliance is switched on.
§ Do not use the vacuum cleaner for sharp objects or glass shards.
§ Never use the vacuum on burning matches, glowing ashes or cigarette butts.
§ Do not use the vacuum cleaner on chemical products, stone dust, gypsum, cement or
similar particles.
§ Do not use the vacuum for liquid, water or similar particles.
§ This appliance is not suitable for use with inflammable and explosive substances or
chemical and aggressive liquids.
§ Always store the appliance indoors. To prevent accidents, keep the appliance in a dry
location when not in use.
§ Under extreme conditions, leakages in the battery cells may occur. In the event that
battery fluid comes into contact with skin or eyes, the affected area must be rinsed
off with water immediately. Immediately consult a physician.
§ This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge only if they are under adult supervision or have been given instructions
concerning the usage of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and maintaining of the
vacuum cleaner shall not be carried out by children without supervision.
Tips for safety:
§ Use only replacement parts or accessories provided or recommended by the
manufacturer.
§ The adapter must not be used for other purposes. Never carry the wall holder or the
adapter by the cable. Do not pull the cable when attempting to move the appliance.
§ Always grip the power plug to disconnect the appliance from the power supply.
§ Always be sure to keep the vacuum away from heating elements, ovens or other
heated appliances and surfaces.
§ Always ensure that the ventilation slits are open. A blocked ventilation circuit can
result in overheating and damage to the appliance.
§ This product contains rechargeable batteries. Do not throw the batteries into a fire
and do not expose them to high temperatures, as battery will explode and cause fatal
or serious damages.
§ Take special care when using the vacuum cleaner on stairs.
§ Do not use the vacuum cleaner without the dust filter inserted.
§ Do not use the adapter for different products and do not attempt to charge this
appliance with a different charging adapter. Use only the charging adapter supplied
with this appliance.
§ Never try to recharge non-rechargeable batteries.

SCOTT MILLER PRODUCT USER MANUAL
Page 4 | 12
Operating Instructions
Assemble the unit
Note: Before assembling the extended tube, ensure that the vacuum cleaner is not connected to the
charger.
1. Remove the vacuum cleaner, extended tube and floor brush from the box.
2. Insert the extended tube into the suction inlet of the handheld vacuum cleaner. A “click” sound
indicates that the extended tube has been assembled correctly. P Ensure that the extended tube
is inserted correctly before starting to use the vacuum cleaner.
3. Connect the floor brush to the extended tube and firmly push the vacuum cleaner towards the
tube and floor brush.
Charging your vacuum cleaner
Note: The vacuum cleaner and power floor brush will not work when it is being charged.
1. Place the unit or vacuum cleaner near an electrical power outlet and plug in the charger.
2. Connect the charger to the charging socket. The battery status indicator will light on to indicate
that the vacuum cleaner is properly connected to the charger and that the unit is being charged.
All the 3 indicator lights will turn off 4.5 hours after reaching full charge.

SCOTT MILLER PRODUCT USER MANUAL
Page 5 | 12
Detach the vacuum cleaner from the unit
Note: Ensure that the unit is not connected to the charger before detaching the vacuum cleaner.
1. To remove the vacuum cleaner from the extended tube, push the extended tube release button
to pull out the extended tube from the vacuum cleaner. G ras p t he ha nd le of the vacuum cleaner
and pull the extended tube outwards.
2. You can use the handheld vacuum cleaner directly. If you need to reassemble the unit, refer to the
instructions in the section - “Assemble the Unit”.
Using the vacuum cleaner
Note: Remove the charger before using the vacuum cleaner. If the vacuum cleaner is in charging mode or
low battery status, the vacuum cleaner and floor brush will not work properly.
1. The vacuum cleaner can be operated independently, with crevice nozzle or other connection
converter enabled brushes.
2. To use the vacuum cleaner, ensure that the vacuum cleaner is firmly attached to the extended
tube and floor brush. A “click” sound indicates that the vacuum cleaner has been correctly
assembled.
3. Press the power switch on the main handle or press the power switch on the vacuum cleaner to
alternate between settings (I) (normal power), (II)(maximum power) and off.
4. Check if your purchased model comes with power brush and aluminium tube. You may use the
vacuum cleaner as follows, whichever is convenient for you.

SCOTT MILLER PRODUCT USER MANUAL
Page 6 | 12
Removing the dust container & HEPA filter
Note: To ensure optimum performance of the vacuum cleaner, empty the dust container and clean the
HEPA filter frequently.
1. Remove the vacuum cleaner from the accessories. Press the release button to remove the
accessories.
2. Push down the dust release button. Empty the dust from the dust container.
3. Press the release button of dust container to remove it from the vacuum cleaner.
4. Rotate the upper cover of the dust container towards the “unlock” marking and remove the upper
lid. Proceed to take out the HEPA filter.
5. Remove HEPA filter and plastic cyclone filter. Wash and allow to dry completely before putting
back the HEPA filter into the vacuum machine. Do not use washing machine to clean the HEPA
filter assembly. Do not use hair dryer to dry it. Air dry only.
6. Push the HEPA filter assembly to firmly secure it back to the dust container. NEVER operate vacuum
cleaner without HEPA filter assembly in place.
7. Attach the HEPA container assembly to the vacuum cleaner.
CAUTION: The suction inlet must be open and free of any obstructions at all times. Otherwise, the motor
may be overheated and could be damaged.
Note: it is recommended to clean or replace filter frequently. The cyclone system should be cleaned every
three (3) to six (6) months depending on the usage to ensure optimum performance of the vacuum cleaner.
The power brush rolling bar should be checked from time to time to avoid blockage. In the event of a faulty
operation, such as the power brush rolling bar is blocked by hair, or the main vacuum motor inlet is jammed,
or the battery is overheated etc., the system may be cut off to protect the motor of the product. Use the
charger to reactivate the vacuum cleaner and if problem persists, send it to a qualified service agent for
repair or maintenance.

SCOTT MILLER PRODUCT USER MANUAL
Page 7 | 12
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
Vacuum cleaner does
not work
1. Battery not charged up properly.
2. Dead battery (battery would not
hold charge).
3. Connector between the unit and
the charger is dirty.
4. No power in electrical outlet
supplying transformer.
5. Charger is plugged in.
6. System is cut off.
1. Charge unit.
2. Contact customer service or dispose the
unit appropriately.
3. Wipe and clean dirt from connector.
4. Check fuse or breaker, replace faulty
fuse/reset breaker.
5. Unplug charger.
6. Activate the system with the charger.
Power floor brush
does not work
1. Rolling brush is blocked with
debris or string etc.
2. Belt is broken.
3. Vacuum cleaner is not connected
properly.
1. Remove debris from rolling brush. If
there is string or thread coiled around,
cut gently with scissors.
2. Contact customer service for assistance.
3. Connect the vacuum cleaner properly.
Vacuum cleaner
cannot pick-up dust;
suction power
become weak
1. Dust container is full.
2. HEPA filter needs cleaning or
replacement.
3. Unit needs recharging.
1. Empty dust container
2. Remove dust filter assembly and check
for obstructing object(s) in suction inlet
and remove. Clean or replace dust filter
assembly.
3. Charge unit.
Dust leak from
vacuum cleaner
1. Dust container is full.
2. Dust filter is not installed
correctly.
3. Puncture/hole in dust filter
1. Empty dust container
2. Review the dust filter assembly and
follow installation instructions carefully.
3. Replace dust filter assembly.
Battery cannot be
charged
Battery has reached the end of its service
life.
Contact customer service for assistance.
Strange noise when
the operation
Check if the floor brush and dust filter are
blocked by dust or debris; check if dust
container is full.
Stop using the appliance right away; clean the
dust filter assembly, floor brush, and empty the
dust container. If problem persists, contact
customer service for assistance.

SCOTT MILLER PRODUCT USER MANUAL
Page 8 | 12
Important
Ensure that dust filter is completely air dried before replacing it back into the vacuum cleaner.
Warning
Remove floor brush from the unit before cleaning it.
WARNING:
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health due to
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take back this product for
safe disposal.

SCOTT MILLER PRODUCT USER MANUAL
Page 9 | 12
PRODUCT E-WARRANTY | SM-V6000
WARRANTY COVERAGE AND WARRANTY COVERAGE TIME PERIODS
The SCOTT MILLER (S) PTE. LTD. (“SCOTT MILLER SG”) warranty covers the repair and replacements on
certain parts of this vacuum cleaner and the cost of workmanship of the parts for a period of twelve (12)
months from the date of purchase. This limited warranty covers substantial defects in materials and
workmanship of the Vacuum Cleaner, provided that the Vacuum Cleaner is operated and maintained
properly and in conformity with the user’s manual. The warranty period becomes effective from the date
of purchase. This limited warranty applies only to the first purchaser of the products. It is not transferable.
WHAT SCOTT MILLER SG WILL DO TO CORRECT PROBLEMS This warranty covers only the repair and/or
replacement of the Vacuum Cleaner’s motor. In the event that a substantial defect in material and/or
workmanship, attributable to SCOTT MILLER SG, is found to exist during the warranty coverage period
specifically in the Vacuum Cleaner’s motor only, it will be repaired or replaced at SCOTT MILLER SG’s
discretion, without imposing any charges for the parts and/or workmanship to repair the Vacuum Cleaner’s
motor, in accordance with the terms, conditions and limitations of this limited warranty. The cost of labour
to repair or replace at any time after the warranty coverage detailed above is the sole responsibility of the
purchaser and is to be borne by the purchaser. SCOTT MILLER SG’s obligation to repair or replace defective
materials or workmanship is the sole obligation of SCOTT MILLER SG under this limited warranty, provided
that and terms and conditions of this limited warranty are fulfilled. SCOTT MILLER SG reserves the right to
use new or remanufactured parts of similar standard to complete any work, and to make parts and design
changes from time to time without providing prior notice. SCOTT MILLER SG reserves the right to make
changes in the design and/or material of its products without incurring any obligation to incorporate such
changes in any previously manufactured product. SCOTT MILLER SG makes no warranty as to the future
performance of this product. In addition, the purchaser’s obligation to notify SCOTT MILLER SG, or one of
its authorised independent dealers, of a claimed defect does not modify any obligation placed on the
purchaser to contact SCOTT MILLER SG directly when attempting to pursue remedies under laws of
Singapore.
LIMITATIONS, EXCLUSIONS AND DISCLAIMER OF IMPLIED WARRANTIES Any implied warranty that is
found to arise by way of law, including any implied warranty of merchantability or any implied warranty of
fitness, is limited in duration and scope of coverage of this limited warranty. SCOTT MILLER SG disclaims
any express or implied warranty, including any implied warranty of fitness or merchantability, on items
excluded from the coverage under this warranty as set forth. SCOTT MILLER SG makes no warranty of any
nature beyond that contained in this limited warranty. No one has the authority to enlarge, amend or
modify this limited warranty, and SCOTT MILLER SG does not authorise anyone to create any other
obligation for it regarding this product. SCOTT MILLER SG is not responsible for any representation, promise
or warranty made by any independent dealer or other person beyond what is expressly stated in this
limited warranty. Any selling or servicing dealer is not an authorised SCOTT MILLER SG’s agent, but an
independent entity.
SCOTT MILLER SG SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT MAY

SCOTT MILLER PRODUCT USER MANUAL
Page 10 | 12
RESULT FROM THE BREACH OF THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY. THIS EXCLUSION
OF CONSEQUENTIAL AND INCIDENTAL DAMAGES SHALL BE INDEPENDENT OF ANY FAILURE OF THE
ESSENTIAL PURPOSE OF ANY WARRANTY, AND THIS EXCLUSION SHALL SURVIVE ANY DETERMINATION
THAT THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY HAS FAILED OF ITS ESSENTIAL PURPOSE.
This warranty does not cover, and in no event shall result in SCOTT MILLER SG being liable for towing
charges, travel, lodging, or any other expenses incurred due to the loss of use of the product or by any
other reasons that may be raised.
HOW TO GET SERVICE To obtain warranty service, the purchaser shall: 1. Notify an authorised service
centre with regards to the claimed defect attributable to SCOTT MILLER SG, within the warranty coverage
period designated above; 2. Provide the notification mentioned in (1) above, within ten (10) days when
the owner discovered, or should have discovered, the claimed defect; 3. Promptly schedule an
appointment with and take the product to an authorised service centre for servicing; 4. Pay any
transportation costs and all expenses associated with obtaining the warranty service. Since SCOTT MILLER
SG does not control the scheduling of service work at the independent dealerships you may contact SCOTT
MILLER SG, by email at [e-mail]. If two (2) or more service attempts have
been made to correct any covered defect that you believe impairs the value, use or safety of the product,
or if it has taken longer than thirty (30) days for repairs to be completed, you must, to the extent permitted
by law, notify SCOTT MILLER SG directly, in writing, to the above email address, on the unsuccessful repair(s)
of the alleged defect(s) so that SCOTT MILLER SG can then be directly involved in providing service pursuant
to the terms of this limited warranty.
WHAT IS NOT COVERED This Limited Warranty does not cover any of the following: defects in materials,
components or parts of the product not attributable to SCOTT MILLER SG, any material, component or part
of the product that is warranted by another entity (Note: the written warranty provided by the
manufacturer of the material, component or part is the direct responsibility of the manufacturer); items
that are added or changed after the product leaves SCOTT MILLER SG’s possession; additional items
installed at any dealership, or other place of business, or by any other party, other than SCOTT MILLER SG;
normal wear, tear, usage, maintenance, service, periodic adjustments, the effects of condensation or
moisture from condensation; mould or any damage caused by mould; imperfections that do not affect the
product for its intended purpose; items that are working as designed but that you are unhappy with;
problems related to mis-operation, misuse, mishandling, neglect or abuse, including failure to maintain the
product in accordance with the user manual, or other routine maintenance such as inspections, lubricating,
adjustments, tightening of screws, sealing, wheel alignments or rotating tires; damage due to accident or
collision, including any acts of weather or damage or corrosion due to the environment; theft, vandalism,
fire, act of God or other intervening acts not attributable to SCOTT MILLER SG; damage resulting from
defacing, scratches, dents, or chips on any interior or exterior surface of the products, including
overloading or alteration of the product, or any of its components or parts. Defects and/or damage to
interior and exterior surfaces and other appearance items may occur at the factory or when the product is
in transit. These items are usually detected and corrected at the factory or by SCOTT MILLER SG or a dealer
prior to delivery to the purchaser. You must inspect the product for this type of damage when you receive
it upon delivery. Upon discovery of any defect or damage, you must immediately notify the dealer, or SCOTT
MILLER SG at the time of delivery to have these defects covered by this limited warranty and to have work
performed on these particular defects at no cost to you as provided by this limited warranty.

SCOTT MILLER PRODUCT USER MANUAL
Page 11 | 12
EVENTS DISCHARGING SCOTT MILLER SG FROM OBLIGATION UNDER WARRANTY The following shall
completely discharge SCOTT MILLER SG from any express or implied warranty obligation to repair or
replace anything and void this warranty: misuse, neglect, collision, accidents, failure to provide routine
maintenance (See User Manual), unauthorised alteration, acts of nature, damage from weather or the
environment, theft, vandalism, tampering, fire, explosions and overloading the product.
LEGAL REMEDIES Any actions to enforce any portion of this limited warranty, or any implied warranty, must
commence within six (6) months after expiration of the warranty coverage period designated above or the
action will be barred because of the passage of time. Any performance of repairs shall not suspend this
limitation period from expiring. Any performance of repairs after the warranty coverage period has expired,
or performance of repairs regarding anything excluded from the coverage under this limited warranty shall
be considered “goodwill” repairs, and will not alter the terms of this limited warranty, or extend the
warranty coverage period or the filing limitation period in this paragraph. In addition, since it is reasonable
to expect that the product will need some service during the warranty period; this warranty does not
extend to future performance. It only sets forth what SCOTT MILLER SG will do and does not guarantee
anything about the product for any time period. Nothing in this warranty, or any action of SCOTT MILLER
SG, or any agent of SCOTT MILLER SG, shall be interpreted as an extension of any warranty period or the
filing limitation period in this paragraph.
WARRANTY REGISTRATION AND MISCELLANEOUS Your warranty registration records should be
completed through our website at https://scottmillerappliances.com/warranty-registration or delivered to
the appropriate companies. The registration of warranty must be completed within twelve (12) months
from the date of purchase. The SCOTT MILLER SG warranty will not be registered unless this warranty
registration is completed and received by SCOTT MILLER SG. SCOTT MILLER SG agrees to repair or replace
any of its factory installed parts found to have substantial defects within the warranty period designated
above provided that the repair is authorised by SCOTT MILLER SG and carried out by an authorised service
centre (a SCOTT MILLER SG labour schedule determines the cost allowance of repairs). SCOTT MILLER SG
will not honour any warranty claim for repairs or replacement of parts unless the claim is submitted with
the appropriate documentation, and the work is completed by an independent, factory authorised service
centre. The appropriate documentations can be submitted in the form of writing to SCOTT MILLER SG.
Appropriate documentations for any previous warranty claimed and/or repairs or replacement provided
by SCOTT MILLER SG shall be provided for the subsequent warranty claim within the warranty period.
SCOTT MILLER SG will not honour any warranty claim for repairs or replacement of parts if the repair or
replacement had been carried out by any entity other than SCOTT MILLER SG’s authorised service centre,
the warranty herein shall be void and all the repair or replacement cost shall be borne by the purchaser.
SCOTT MILLER SG reserves the right to designate where any warranty work can be performed. SCOTT
MILLER SG also reserves the right to examine any defective workmanship or part prior to giving any
authorisation for warranty work. SCOTT MILLER SG’s return authorisation procedure must be adhered to
for the processing of any warranty claims.

SCOTT MILLER PRODUCT USER MANUAL
Page 12 | 12
Innovation for Next
Generation Living