SCT 4416 User manual

WWW.SCTFLASH.COM
QUICK START GUIDE
iTSX \ TSX for Android®
A comprehensive iTSX/TSX User Guide can be found on
the device’s App. Download it today from your device’s app store.
Be sure to register your device online to recieve your product warranty,
device updates, technical support and more.
SCTFLASH.COM/SUPPORT
Alterations made to the OEM configuration of a vehicle may violate the Clean Air Act if
such alterations bypass, defeat, or render inoperative Elements of Design installed on a
vehicle in compliance with the Clean Air Act. Users who alter Derive’s products in any
way are required to make their own individual determination that the altered products
do not violate the Clean Air Act.
This device is not legal for sale or use in California on pollution controlled vehicles.

SECTION 1:
CONNECTING THE ITSX/TSX
1. Locate the OBDII Diagnostic Port which usually located under the dashboard
on the driver’s side. The port may be covered with a cap or located behind a
compartment door labeled OBDII Diagnostic Port.
If the OBDII is is covered or located behind a compartment door you will need
remove the cap or open the cover for access to the port.
2. Plug in the iTSX/TSX Interface Adapter into the vehicle’s OBDII Diagnostic Port.
SECTION 2:
PAIRING THE ITSX/TSX
With the iTSX/TSX plugged in you can now “pair” it to your mobile device via
your device’s Bluetooth wireless connection.
PAIRING FOR iOS® DEVICES
1. From your iOS device go to Settings / General / Bluetooth and select iTSX
Adapter from the list of Bluetooth devices.
PAIRING FOR ANDROID® DEVICES
1. From the Android device’s main application screen touch the “Scan for
Devices” button to scan for available Bluetooth Devices.
2. Once you see the TSX on your list of devices you can now select the device
to pair it to the TSX Adapter.
BLUETOOTH TROUBLESHOOTING
If the iTSX/TSX Adapter fails to appear in the Bluetooth section of
your mobile device, it may need to be reset.
Locate the the “Reset” button on the back of the iTSX/TSX. Using a small
non-metallic object, depress the “RESET” button and repeat Section 2 above.