SDX Audio THERMOBOX User manual
GET STARTED
KEEPING COLD
Insert the electric plug in a socket.
The cooling unit will immediately start cooling
the box to 3°C (factory value). You can follow
the current temperature directly on the display.
When the temperature reaches 3°C, the cooling
unit stops and then starts again when the tem-
perature has risen to 5°C.
Wait at least 25 minutes (K) or 45 minuters (C)
so that the box has time to get evenly cold.
LOADING FOOD IN THE THERMOBOX
Food must be well cooled
before it is placed in the box.
Load the canteens starting from the bottom.
(Feel free to use canteen lids to avoid spillage.)
UNLOADING FOOD FROM THE THERMOBOX
Unload the canteens
starting from the top.
KEEPING HOT
Insert the electric plug in a socket.
The heating element will immediately start heat-
ing the box to 80 °C (factory value). You can see
the current temperature directly on the display.
When the temperature reaches 80 °C, the heat-
ing element switch o and will start again when
the temperature has dropped to 79 °C.
Wait at least 15 minutes (F) or 60 minutes (E)
so that the box has time to get evenly hot.
LOADING FOOD IN THE THERMOBOX
Food must be well heated
before it is placed in the box.
Load the canteens starting from the top.
(Feel free to use canteen lids to avoid spillage.)
UNLOADING FOOD FROM THE THERMOBOX
Unload the canteens
starting from the bottom.
FILAREVÄGEN 1 SE294 39 SÖLVESBORG SWEDEN TEL: +46 0 456135 10 [email protected] WWW.SDX.SE
QUICK START GUIDE
REV 01 2023/03
We want to start by thanking you for your
confidence in choosing our food transport
box for your needs. We are convinced that
you will be satisfied!
THANK
YOU! Anders Pettersson, CEO
CHANGE TEMPERATURE SET VALUE
Hold down the “Set” button.
The set value is now shown flashing in the
display. Use up/down arrow to adjust the value.
Confirm the setting by shortly pressing
the “Set” button again.
easy
set
m
u
t
e
Current temperature
in the transport box
On/O and
Arrow up
Set
Arrow down
When this symbol is
displayed, heating alt.
cooling of the
product is activated
FILAREVÄGEN 1 SE294 39 SÖLVESBORG SWEDEN TEL: +46 0 456135 10 [email protected] WWW.SDX.SE
SETTINGS If necessary, the temperature of the box can be
adjusted. This is done through the display in the front.
QUICK START GUIDE
REV 01 2023/03
MAINTENANCE
Observe the instructions below
to minimize service and repairs:
• Never pull the cord when
disconnecting, pull the plug.
• Check continuously door hinges,
door seals, wheels and brakes.
CLEANING
Cleaning the transport box is very easy
due to the pressed stainless steel guides.
Please observe the following:
• Never use a high-pressure cleaner
for cleaning.
• Use only mild detergent (pH 6-8).
• Use only plastic scraper for cleaning
inside the box.
