Sea Eagle PackFish 7 Quick start guide

PackFish 7
Instructions & Owner’s Manual
For video instructions visit, SeaEagle.com/Instructions
Sea Eagle Boats, Inc.
19 N. Columbia Street, Suite 1
Port Jefferson, NY 11777
1-800-748-8066
March 2017

1
Manufacturer’s Certications
NMMA (for USA only) certication means that the boat, sold in the United States, has been judged by the
National Marine Manufacturer’s Association to be in compliance with the U.S. Coast Guard Regulations and
American Boat and Yacht Council (ABYC) standards and recommended practices.
Sea Eagle Warranty
All Sea Eagle products come standard with a 3 year warranty against manufacturing defects The warranty
begins the date that your product is delivered. Sea Eagle must inspect equipment in order to determine
if there is a defect. In the event that an item must be shipped back to us, Sea Eagle will only reimburse the
standard return shipping charge through FedEx, UPS, or U.S.P.S. at published shipping rates. Fees charged by
retail shipping outlets, like The UPS Store, will not be reimbursed and you are responsible for handling and
packing charges.
Sea Eagle will refuse delivery on packages without a valid return authorization number and will not be
responsible for shipping or handling charges. To obtain a return authorization number, please contact Sea
Eagle directly, unless you purchased from an authorized dealer/reseller in which case contact them for more
information.
If you receive a damaged item, please call the shipping carrier to report the issue. Do not return damaged
merchandise until it has been inspected by the carrier. Sea Eagle will be notied by the carrier when they
have completed their inspection and if necessary, Sea Eagle will arrange for the repair or replacement of
damaged merchandise.
See complete warranty details at SeaEagle.com/Warranty.
Congratulations on purchasing a Sea Eagle!
With over 45 years of experience in designing, selling and using these quality
inflatables, we’re confident that you are going to love your Sea Eagle and we’re
ready to proudly stand behind them.

2
Decals, Stickers & Registration
Always contact your state boating authorities for information on boating registration and regulations.
Most states require you to register your boat if you are using a motor. (Please note, the Sea Eagle
PackFish 7 is rated for use with a 1 hp motor by the NMMA. However, there is currently no provision
for a motor mount.)
Upon registration it may be required to provide the Manufacturer’s Statement of Origin. Purchases made
through an authorized dealer or reseller may require for you to contact them directly in order to obtain this.
You may be charged your own state sales tax if you were not charged sales tax at the time of purchase.
Registered boats generally require the registration number to be applied to the boat. We do not
recommend the use of decals or stickers as they tend to crack and peel over time with the repeated inflation
and deflation of your Sea Eagle. Instead we suggest applying these numbers to a small piece of hard plastic
or marine plywood and hanging it from your boat like a license plate if permitted by your state.
Contact Us
Unlike many other companies today we pride ourselves on answering the phone and helping you with any
concerns, questions or special ordering needs that you may have! Feel free to give us a call at
1-800-748-8066 and we will be happy to talk with you! Our business hours are Monday to Friday from 9AM
to 5PM, EST.
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson, NY 11777
1-800-748-8066
[email protected]

3
Safety
In a manual of this type, it is impossible to give adequate space to the topic of water safety. For further information on
boating safety, visit USCGBoating.org or enroll in a water safety course given by a local provider.
It is your responsibility to be aware of and comply with all relevant safety regulations. For all water recreation or
sport, you should have reasonable swimming abilities. It is strongly advised that you should never go
boating alone.
General Boating Safety Tips
• Always wear a USCG approved PFD (life vest) at all times while on the water.
• Be aware of your local boating rules and regulations and abide by them accordingly.
• Check inflation levels each time before you go out and inflate your boat for a full 24 hours before undertaking long
trips.
• DO NOT allow children to use your Sea Eagle unsupervised.
• DO NOT consume alcohol while boating or operating a boat while under the influence of alcohol or drugs.
• DO NOT drag your Sea Eagle over rocks or gravel if it can be avoided.
• DO NOT exceed the certified maximum capacities of this boat under any circumstance.
• DO NOT go boating alone.
• DO NOT use compressors, CO2or compressed air for inflation, only use Sea Eagle recommended pumps.
• DO NOT use your Sea Eagle Boat as a personal flotation device as they are not rated for that use.
• DO NOT sleep inside of your Sea Eagle while on the water.
• Bring a cell phone or other emergency contact device in a waterproof bag.
• Always tell someone of your boating plans.
Safety Equipment & Important Safety Items
The type of water conditions you are on should determine the type of safety equipment that you should have on
board. For all types of boating we strongly recommend that every passenger wear a USCG approved PFD (personal
flotation device) like a life vest. In most places this is a requirement by law, but it is also an exercise of good judgment
to have a PFD for all passengers
Drinking Water & Snacks: Boating is a physical activity that can work up both a thirst and a sweat. On a hot or warm
day it is smart to have drinking water readily available to prevent dehydration. Bring an ample supply of water.
Extra Clothes/Layers: You never know when the weather can change and it’s a good idea to come prepared with
extra clothing. A dry (waterproof) bag will keep clothes dry in case of emergency.
First Aid-Kit: The contents of the kit may vary depending upon your preferences, but make sure to carry a kit that
reflects the possible dangers for the conditions you are in.
Manual Pump/Repair Kit: Although our boats are both durable and rugged, it may be possible that you need to
make a repair while on the water so you’ll need the repair kit and a manual pump to re-inflate the boat. If this is your
first repair, you may also want to bring this instruction manual with you.
Sun/Rain Protection: A hat can protect both your face and head from the rain or sun. Use and carry sunscreen with
you as both the sun and the sun’s reflection from the water can do serious damage to your skin. If you are out for
prolonged periods of time you may need to reapply sunscreen as needed.
Whistle: Having a whistle readily available is a great way to attract the attention of others if assistance is needed.
Float Plan: Similar to a pilot’s Flight Plan, consider having a Float Plan (www.floatplancentral.org). Always tell
someone where you are going to be boating and what time you plan to return. Keep a cell phone in a waterproof
container that will float if it falls in the water.

4

5
Select a at, hazard
free area to unfold
the boat. Locate the
air valves and oarlock
rings.
Assemble your A42
Bellows Foot Pump.
Push down on the top
& bottom of pump to
release the black clip
and unravel the hose.
Screw the oarlock rings
into the bases.
Move the valve bases
to the openings in the
cover.
SET UP | Pre-Inflation
Stretch the valve
retainer ring over the
valve base.
Tip: Stretch or heat ring
before sliding onto the
base. Use hot water or a
hairdryer.
Insert the hose into the
“INFLATE” port on the
foot pump.
Note: Use the “DEFLATE”
port when you need to
pack your boat down as
compact as possible.
Four adapters are
included. Only the two
pictured work with Sea
Eagle Boats. Either of
the two Air Valve
Adapters work with the
PackFish 7 and
inatable seats.
Insert the proper
adapter into the end of
the hose and lock into
place.
Note: Valve adapters
can be left attached to
the tether or removed.

6
Wide End Adapter: fits inside the air valve.
Twist Cap Adapter: twists onto the air valve like a
bottle top.
Open the cap of the air
valve and twist on or
insert the adapter.
Pump until firm &
wrinkle free. You should
be able to press your
thumb about a 1/2” into
the tube when the tubes
are properly inflated.
Inflate seat until
comfortably firm.
Tighten valves firmly to
avoid deflation.
(Wide End adapter
shown.)
Screw the valve into the
base tightly and unscrew
the cap.
MB-80 Electric Pump
(OPTIONAL)
This electric pump
works using the 12V
power outlet in a car or
with the optional Minn
Kota Power Center.
First, check that the
pump is switched OFF
before inserting the
power adapter into
your car’s power
outlet.
Directly insert the
pump (nozzle) into the
valve fill port.
Please note the valve
adapters and black
tube that come with
the MB-80 are not
necessary for Sea Eagle
boats.
Battery Connector
(OPTIONAL)
You can also power
your MB-80 using the
optional battery
connector which will
allow you to use the
pump while connected
directly to a 12V car or
marine battery.
WARNING: Always connect the red clip to the positive
pole and the black clip to the negative pole. Cross
connecting wires could damage both the pump and
boat.
Warning:
Air compressors that
are designed for other
uses, like tire ination
(usually around 32 PSI)
can easily harm your
Sea Eagle which works
at a much lower pres-
sure. For this reason we
recommend only using
Sea Eagle pumps.

7
Insert hose into the
first chamber valve and
pump until firm. This is
the safety chamber.
SET UP |Inflation
Optional Floorboard
Insert floorboard after
inflating the first
chamber. Center in the
boat but do not cover
the rod holders. (Holes
in the board are not
used with PackFish 7.)
Insert hose into the
second chamber and
inflate until firm. This
is the main flotation
chamber. Most of the
wrinkles should be out
of the cover.
Deluxe Inatable
Green Seat
Attach valve to bases.
Inate the seat so that
it is comfortably rm.
Tighten valves very
rmly to avoid
deation.
Two-Part Oars
Each oar has a shaft,
drip guard and blade.
Left and right are
assigned by looking at
the boat from the back
towards the front.
Push the drip guard
onto the shaft all the
way to the black grip.
Insert shaft in oarlock
ring.
Slide the blade onto
the shaft and adjust
until the button pops
up through the hole.
Repeat assembly for
the other side.
Orient the curve of
the blades to cup the
water on the power
stroke.

8
For quick access, with
the oar in the oarlock,
secure the shaft with
the hook & loop strap.
Due to the bulk and
weight of the boat and
accessories, use caution
not to lose balance or
overexert yourself.
Unscrew the valves
from the bases. Most of
the air will release
immediately.
Remaining air will
push out as the boat is
folded.
BREAK DOWN | Deflation, Folding & Storage
Remove boat bag from
its stow pouch
behind the seat.
Fold one side over the oor. The bottom
should be exposed 2-3 inches past the
tracking strips.
Fold the other side over the rst side until
the tracking strips comes over 2-3 inches.
Then begin folding from back to front using
the tracking strips as guides.
Unscrew oarlocks and
secure them in tool strap.
For nal folds, fold the front up and over the
tracking strips, then fold the back on top.

9
Slide the boat and
accessories into the
bag.
Boat and all accessories
t in the included
storage bag.
STORAGE
TROUBLE SHOOTING | Air Leak
PVC can become brittle in cold temperatures. To avoid
damage, store in an area where sudden impacts are not
possible.
If leaving the Sea Eagle outside during boating seasons,
keep it raised off the ground and covered so that it is
not exposed to berries, leaves, rain, sunlight and other
elements.
Sea Eagles that are left uncovered will have to be bailed
or pumped out from time to time. Accumulated rainwater
can get quite heavy.
Dry the boat and accessories before storing to eliminate
moisture that could cause mildew.
Choose a cool, dry spot when storing. Enclosed areas
like a basement, closet or garage should be ventilated or
humidity controlled.
Avoid excessive heat when storing. Do not store in an
attic or metal shed.
Rodent proof the storage areas. Mice can do a lot of
damage. Use a container with a tight lid, such as a clean
garbage can or large plastic bin.
If your boat is losing air it doesn’t necessarily mean that it
has a hole. For instance a boat that is inflated late in the
day with 90° air may cool 20° overnight.
The cooler air will exert less pressure on the hull and the
boat will appear softer the next morning. When there has
been no variation in temperature and your boat is losing
air then it is time to start looking for the leak.
What causes an inatable to leak air?
Valve leaks: Usually caused by valve not screwed in
tight enough, retainer ring pinched between base and
valve or a dent in the base O-ring.
Punctures can be caused by submerged metal debris,
oyster shells, barnacles, sh spines, dragging the boat
over pavement or concrete, exposed nails in docks,
damage done in storage, and other causes. Boats are
usually not damaged by rocks, sticks or sh hooks.
Seam leaks are the least likely cause of a leak. If a seam
leak if found, contact Sea Eagle customer service. Take
photos of the problem if possible.
Most repairs are simple and can be done with the repair
kit and a hair dryer (if available).
Visual Inspection
First, listen for air escaping, you may be able to identify
the leak immediately.
Visually inspect the cover for rips, tears or punctures.
Check top and bottom. Mark the inner bladder with pen
or pencil when the leak if found.
Listen
If you have a rough idea of where your leak is but can’t
see it, you may want to try listening for it as you may be
able to hear the air escaping and pinpoint the leak.