Seada SD-USB100 User manual
USB 2.0 Extender (100M)
VER 1.0
SEADA
SD-USB100
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction...........................................................................................
2. Features.................................................................................................
3. Package Contents................................................................................
4. Specifications.......................................................................................
5. Operation Controls and Functions......................................................
5.1 Transmitter Panel.............................................................................
5.2 Receiver Panel................................................................................
6. Application Example............................................................................
1
1
1
2
3
3
4
5
1. Introduction
2. Features
☆Support USB 2.0 protocol, transmission rate is up to 200Mbps
☆Transmission distance is up to 100m/328ft via a single CAT5e/6 cable
☆Support one USB-B port input on the transmitter
☆Support two USB 2.0 ports output on the receiver
☆Support PoC function. It means that either transmitter or receiver is powered
through 12V/1A power adapter, the other doesn’t need power supply
☆Simple plug and play, no drive and installation setting required
☆Compact design for easy and flexible installation
3. Package Contents
①1× USB 2.0 Extender (Transmitter)
②1× USB 2.0 Extender (Receiver)
③1× USB cable (USB-B male head to USB-A male head, 1m)
④ 1× 12V/1A Locking Power Adapter
⑤ 1× User Manual
The USB 2.0 Extender can extend USB signal up to 100m/328ft via a single
Cat5e/6 cable. On the transmitter, the USB-B port is connected to a PC. On
the receiver, you can connect with USB devices (such as USB flash disk or
Printer) through the two USB ports. Both the transmitter and receiver
support PoC (Power over Cable) function. The product can be widely used for
long distance signal transmission between a PC and USB device. Simple
plug and play, no drive and installation setting required.
Transmitter/Receiver: 100g
Dimensions
Weight
Metal Enclosure
Color Black
Transmitter/Receiver: 82mm (W)×49mm (D)×20mm (H)
Housing
Input: AC 100~240V 50/60Hz
Output: DC 12V/1A
(US/EU standards, CE/FCC/UL certified)
Transmitter: 1.3W, Receiver: 2.3W
0°C~40°C/32°F~104°F
-20°C~60°C/-4°F~140°F
Power Supply
Operating Temperature
Storage Temperature
Relative Humidity 20%~90% RH (non-condensing)
Power Consumption
Connection
Transmitter Input port: 1×USB [USB-B, female]
Output port: 1×CAT [RJ45, female]
Receiver Input port: 1×CAT [RJ45, female]
Output port: 2×USB [USB-A, female]
Mechanical
4. Specifications
USB Protocol USB 2.0
Technical
ESD Protection Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Transmission Distance 100M (328ft)
Transmission Rate Up to 200Mbps
5. Operation Controls and Functions
5.1 Transmitter Panel
No. Function DescriptionName
1 USB(TO PC) USB port, connects to the USB port of a PC through a
USB-B male head to USB-A male head wire.
2Power LED indicator. The green LED will be on, when the
transmitter is powered on.
POWER LED
3
CAT port The CAT port is connected to the receiver’s CAT port
by a CAT5e/6 cable.
DC 12V Plug DC 12V/1A power supply into the unit and connect
the adapter to an AC outlet.
4
CATDC 12V
123 4
Plug 12V/1A DC power supply into the unit and connect
the adapter to an AC outlet.
5.2 Receiver Panel
USB 2.0 USB 2.0
DEVICE
CATDC 12V
No. Function DescriptionName
1USB 2.0
DEVICE ports
Connect two USB 2.0 DEVICE ports to USB devices,
such as USB flash disk or Printer.
2 POWER LED Power LED indicator. The green LED will be on when the
transmitter is powered on.
3 DC 12V
4 CAT port The CAT port is connected to transmitter’s CAT port by
CAT5e/6 cable.
234
1
CATDC 12V
6. Application Example
Power Supply
PC
Transmitter
Receiver
Printer
U Flash Disk
Cat5e/6 (100M)
USB 2.0 USB 2.0
DEVICE
CATDC 12V
5 / 5
Table of contents
Other Seada Extender manuals
