Seagate 1AYBA4 Manual

Seagate Wireless Plus Installation and
Setup
Model 1AYBA4

Seagate Wireless Plus Installation & Setup
© 2014 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave
logo, and Seagate Media are trademarks or registered trademarks of Seagate Technology LLC, or
one of its affiliates. iPod, iPad, iPhone, Time Machine, Safari and Mac are trademarks or registered
trademarks of Apple Computer, Inc. and used to indicate compatibility. All other trademarks or
registered trademarks are the property of their respective owners. When referring to hard drive
capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one
thousand billion bytes when referring to hard drive capacity. In addition, some of the listed capacity
is used for formatting and other functions, and thus will not be available for data storage.
Quantitative usage examples for various applications are for illustrative purposes. Actual quantities
will vary based on various factors including file size, file format, features, and application software.
Seagate reserves the right to change, without notice, product offerings or specifications.
Seagate Technology LLC
10200 S. De Anza Blvd.
Cupertino, CA 95014
USA

Seagate Wireless Plus Installation & Setup iii
Regulatory Compliance
FCC Class B Information
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination.
The firmware setting is not accessible by the end user.
Note to US model owner: To comply with US FCC regulation, the country selection function
has been completely removed from all US models. The above function is for non-US models
only.

Seagate Wireless Plus Installation & Setup iv
Industry Canada
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout
brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
IMPORTANT NOTE: (For mobile device use)
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
Battery Safety
This product contains a lithium-ion battery that must be disposed of properly.
Please follow the battery safety items below:
•Do not dismantle, open or shred secondary cells or batteries.
•Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
•Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box
or drawer where they may short-circuit each other or be short-circuited by, other metal
objects.
•Do not use any charger other than that specifically provided for use with the equipment.
•Do not use any cell or battery which is not designed for use with the equipment.
•Do not mix cells of different manufacture, capacity, size or type within a device.
•Seek medical advice immediately if a cell or a battery has been swallowed.
•Do not subject cells or batteries to mechanical shock.

Seagate Wireless Plus Installation & Setup v
•In the event of a cell leaking, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made, wash the affected area with copious amounts of water
and seek medical advice.
•Keep cells and batteries out of the reach of children.
•Keep cells and batteries clean and dry.
•Secondary cells and batteries need to be charged before use. Always use the correct
charger and refer to the manufacturer's instructions or equipment manual for proper
charging instructions.
•Do not leave a battery on prolonged charge when not in use.
•After extended periods of storage, it may be necessary to charge and discharge the cells
or batteries several times to obtain maximum performance.
•Secondary cells and batteries give their best performance when they are operated at
normal room temperature (20°C+5 °C).
•Retain the original product literature for future reference.
•Use only the cell or battery in the application for which it was intended.
•Dispose of properly.
The Seagate Wireless Plus device is not intended for office use.

Seagate Wireless Plus Installation & Setup vi

Seagate Wireless Plus User Guide vii
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Supported Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Supported Web Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supported File Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Setting up and Using Your Seagate Wireless Plus . . . . . . . . . . . . . 3
Installing the Seagate Media app . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Establishing a Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Loading Media onto the Seagate Wireless Plus . . . . . . . . . . . . . . . . . . . . . . 4
Setting a Password for Your Seagate Wireless Plus . . . . . . . . . . . . . . . . . . . 5
Connecting to the Internet Through Your Seagate Wireless Plus . . . . . . . . . 6
Streaming Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Understanding Your Seagate Wireless Plus . . . . . . . . . . . . . . . . . . . 7
Understanding Wi-Fi Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the device to your computer . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disconnecting the device from your computer . . . . . . . . . . . . . . . . . . . . 8
Working with the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Recycling the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Resetting Your Device to Its Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Finding More Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Common Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1. Introduction
Seagate Wireless Plus User Guide 1
1. Introduction
Congratulations on the purchase of your Seagate Wireless Plus. Using this device, you can
take your digital media anywhere and stream it to your Wi-Fi-enabled tablet, smartphone, or
computer. Imagine listening to your favorite music while hiking through the Swiss Alps. You
can do that with the Seagate Wireless Plus.
This guide shows you how to set up your Seagate Wireless Plus so that you can begin
enjoying your videos, photos, and music wherever you are.
What’s in the Box?
Unpack the box and ensure you have all of these items.
Product Specifications
Supported Devices
•iPad, iPhone, iPod touch running iOS 4 or later
•Android-based tablets and smartphones running Android release 2.1 or later
•Other Wi-Fi-enabled tablets and smartphones
•Windows computer running Windows 8, Windows 7, Windows Vista, or Windows XP
Detachable USB 3.0 Cable
Seagate Wireless Plus Wireless Storage Device
Quick Start Guide
USB Wall Adapter

1. Introduction
Seagate Wireless Plus User Guide 2
•Mac computer running Mac OS X 10.5.8 or later
Supported Web Browsers
•Safari 5 or later (Mac OS)
•WebKit (Android)
•Internet Explorer 8 or later (Windows)
•Firefox
•Google Chrome
Supported File Types
For iPads
•Video: H.264 video, MPEG-4, Motion-JPEG
•Audio: AAC, MP3, M4a, Audible (formats 2, 3, 4), Apple Lossless, AIFF, WAV
•Documents: Microsoft Office, iWork, PDF
•Certain files supported by third-party apps
For Laptops, Tablets, and Smartphones
•Any files supported by your device applications
Hardware Specifications
•Drive Capacity: 1TB
The Wireless Plus can store over 300 high- definition movies (1.5GB MP4 H.264), 125,000
songs, or 100,000 photos.
Note: Quantitative usage examples for various applications are for illustrative purposes.
Actual quantities will be based on various factors, including file size, file format, features,
and application software.
•SuperSpeed USB 3.0 port (required for USB 3.0 transfer speeds) or USB 2.0 port
•Battery: Non-user replaceable, rechargeable lithium-ion battery
•Battery Life: Up to 10 hours of continuous streaming (1 user); up to 25 hours standby
•Maximum Wi-Fi range: 45 meters (147 feet)
•Drive Format: NTFS
The Paragon NTFS driver is available to enable read/write access using the Mac OS. The
software is available on your Seagate Wireless Plus.

2. Setting up and Using Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 3
2. Setting up and Using Your Seagate
Wireless Plus
This chapter explains each step of the setup process in more detail than what is described in
the Quick Start Guide.
Installing the Seagate Media app
Use the Seagate Media app on your mobile devices to organize and stream the media stored
on the Seagate Wireless Plus.
•On your mobile device, go to the Apple App Store, Google Play Store, or the Amazon
website, and then find and install the Seagate Media app.
Note: The same functionality is available on your computer through a Web browser after
it is wirelessly connected to the Seagate Wireless Plus.
Establishing a Wireless Connection
Your Seagate Wireless Plus comes partially charged and runs for about 45 minutes.
Consider fully charging it (see Charging the Battery) before connecting other devices.
You can wirelessly connect up to eight devices to your Seagate Wireless Plus.
1. Press the power button on the side of the Seagate Wireless Plus.
The Wi-Fi LED blinks as the device starts up. When the Wi-Fi light is solid blue, your device
is Wi-Fi enabled and ready to accept other device connections.
Power Button

2. Setting up and Using Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 4
2. Open the network or wireless settings on your computer or mobile device.
Note: See the user documentation for your computer or mobile device for the most up-to-
date instructions on connecting to a wireless network.
•Apple devices—choose Settings > Wi-Fi.
•Android devices—choose Settings > Wireless & Networks > Wi-Fi.
•Mac Computer—select Apple > System Preferences and then select Network.
•PC—enable the wireless connection.
3. Select Seagate Wireless from the list of networks.
This establishes a wireless connection between your device and the Seagate Wireless
Plus.
4. Open the Seagate Media app.
•On the home page of your mobile device, tap the Seagate Media app icon.
•On your computer, open a browser and type “www.seagatewirelessplus.com” or any
other URL in the address bar.
The Seagate Wireless Plus main page appears with the Getting Started tutorial ready for
viewing.
5. Follow the steps in the Getting Started tutorial to verify that you can view a video and
connect to the Internet.
Your devices are now ready to stream the sample media packaged with your Seagate
Wireless Plus.
Loading Media onto the Seagate Wireless Plus
1. Connect the supplied USB 3.0 cable to the Seagate Wireless Plus and the USB 3.0 or 2.0
port on your computer.
Notes:
If you are connecting to a Mac, do not allow Time Machine to use the Seagate Wireless
Plus for backup because it will attempt to reformat the drive. If your device has been
reformatted, see I mistakenly reformatted the drive for my Mac.
The Seagate Wireless Plus is not available as a wireless connection to your other devices
while it is physically connected to your computer.
The device’s name appears on your computer as Seagate Wireless xxx where xxx
represents the last three digits of the device’s serial number.

2. Setting up and Using Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 5
2. The power button on your Seagate Wireless Plus can be on or off. The device gets its
power from the computer.
A white Wi-Fi LED indicates that the wireless connection has been disabled. The battery
LED turns amber when the device is charging.
3. (Mac only) If the device is connected to your Mac, install MacInstaller.dmg (located on
your Seagate Wireless Plus) to allow file copying.
4. Copy media to your device by dragging and dropping files from your computer to your
device.
Notes:
It is the user’s responsibility to comply with applicable copyright laws and to respect
owner’s rights in content usage.
The time it takes to copy data to your Seagate Wireless Plus depends on the amount you
are copying. If you have a lot of media files, consider copying the files overnight.
Your Apple, Android, or other Wi-Fi device plays files only in the formats that it supports.
See your device’s specifications for details.
You cannot copy files from your Seagate Wireless Plus to your computer. You can copy
files to and from your mobile device and your Seagate Wireless Plus while in Wi-Fi mode.
You can also install Seagate Media Sync software to help you copy your files and
synchronize them after they are on your Seagate Wireless Plus. Download the software to
learn more:
•Windows
•Mac
Setting a Password for Your Seagate Wireless Plus
When you set a password for your Seagate Wireless Plus, only those who know the
password can connect their devices to the wireless device.
1. Establish a wireless connection from your mobile device or computer to the Seagate
Wireless Plus.
2. Open the Seagate Media app on your mobile device or in a Web browser on your
computer.
3. Tap or click the Settings icon ( ).
4. Tap or select Network.
5. Tap or select Turn on password (or Off to the right of Enable Password on some
devices).

2. Setting up and Using Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 6
6. Type a password of at least 8 alphanumeric characters in the window that opens, and
then tap or click OK.
Connecting to the Internet Through Your Seagate
Wireless Plus
To stream media from the device and browse other sites at the same time, connect to the
Internet through your Seagate Wireless Plus.
TIP: We do not recommend streaming a movie from the Internet while connected to the
Seagate Wireless Plus network.
1. Establish a wireless connection from your mobile device or computer to the Seagate
Wireless Plus.
2. Open the Seagate Media app on your mobile device or in a Web browser on your
computer.
3. Tap or click the Wi-Fi icon ( on most devices) near the top of the app or page.
4. Select the wireless network you want and tap or click Join Network.
Streaming Media
Use the Seagate Media app to stream media from the Seagate Wireless Plus to your mobile
device or computer.
1. Power on the Seagate Wireless Plus.
2. Establish a wireless connection between the Seagate Wireless Plus and your mobile
device or computer.
3. Open the Seagate Media app on your mobile device or in a Web browser on your
computer.
4. Select the media you want to play, and enjoy.
You can connect up to eight devices to the Seagate Wireless Plus, and you can stream to
up to five devices at the same time.
5. For details on using the Seagate Media app, visit the Seagate Media support page.

3. Understanding Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 7
3. Understanding Your Seagate
Wireless Plus
Understanding how your Seagate Wireless Plus operates helps keep your device charged
and ready to stream your media library.
Understanding Wi-Fi Mode
The Seagate Wireless Plus serves as a Wi-Fi network allowing you to stream your media to
other devices. When the wireless device is physically connected to your computer, Wi-Fi
mode is disabled.
Connecting the device to your computer
If you are using the device to broadcast Wi-Fi and then physically connect the device to your
computer, the Wi-Fi LED turns from blue to white and Wi-Fi is disabled.
Wi-Fi LED
Color Description
Blue Wi-Fi enabled and ready to broadcast to other devices.
White Wi-Fi disabled and physically connected to a computer.
No Color Wi-Fi disabled and powered off.
Power Button
USB 3.0 Port
Wi-Fi LED
Power LED

3. Understanding Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 8
Disconnecting the device from your computer
If the device is turned on and is physically connected to your computer, the Wi-Fi LED is
white. If you disconnect the device from the computer, the device searches for a network and
the LED turns solid blue when it begins broadcasting.
If the device has not been turned on and is physically connected to your computer, the Wi-Fi
LED is white. If you disconnect the device from the computer, the Wi-Fi LED has no color
because the device is turned off and unable to broadcast over Wi-Fi.
TIP: If your Seagate Wireless Plus is not working as you expect, reset the device by
pressing and holding the power button for 15 seconds. This turns off the LEDs, and
then shuts down and restarts the device.
Working with the Battery
The Seagate Wireless Plus uses a rechargeable lithium-ion battery.
Charging the Battery
•To charge the battery, connect the device to a power outlet using the included USB to DC
wall adapter.
Battery
LED Color Description
Green Charged—A fully charged battery provides up to 10 hours of continuous
streaming, but loses the charge faster when playing higher resolution
video. The battery retains its charge for up to 25 hours when the device
is in standby mode, which occurs after 5 minutes of inactivity.

3. Understanding Your Seagate Wireless Plus
Seagate Wireless Plus User Guide 9
Your Seagate Wireless Plus also charges when it is physically connected to a computer but
at a slower rate.
Recycling the Battery
The battery is not user-replaceable and is affected by the number of charge cycles. It must be
disposed of properly.
Resetting Your Device to Its Factory Settings
For a variety of reasons, you might need to reset your Seagate Wireless Plus back to its
original factory settings.
•Press and release the button located on the bottom of your device. No data is lost during
this process, and you do not need to reconfigure the device.
Red Low—The battery needs to be charged. When the LED turns red, the
battery has about 15–20 minutes of life and should be charged soon.
Amber Charging—The device is plugged in and charging. Recharging takes
about 4 hours. For safety purposes, the device stops charging after 4
hours.
Battery
LED Color Description

4. Getting Help
Seagate Wireless Plus User Guide 10
4. Getting Help
The Seagate Wireless Plus is a plug-and-play device. However, in certain situations, the
setup process and product usage might require extra attention.
Finding More Help
Visit the Seagate Wireless Plus support page where you will find:
•How-to videos
•Firmware updates (when available)
•Software updates (when available)
•FAQs
Common Problems and Solutions
I can’t connect wirelessly to the Seagate Wireless Plus
•Make sure that the Seagate Wireless Plus is physically disconnected from your computer,
powered on, and that the Wi-Fi LED is a steady blue. A steady blue indicates that the
device is Wi-Fi ready and broadcasting.
•Make sure to select Seagate Wireless from your device’s wireless network list. If you
leave the Seagate Wireless Plus range (150 feet), your device disconnects from the
signal. Any obstructions, such as walls between your device and Seagate Wireless Plus,
might affect the strength of the signal.
•If you know that the Seagate Wireless Plus is broadcasting, but your device can’t
connect, the upper limit of eight devices might already be connected to it. Try
disconnecting one of the other devices.
•If you are attempting to stream using a browser, make sure that your device’s wireless
connection is enabled. Go to any URL to be redirected to the Seagate Wireless Plus main
page.
I mistakenly reformatted the drive for my Mac
If you mistakenly allowed Time Machine to use the Seagate Wireless Plus as its backup
drive, it reformatted the drive for backup purposes. You must return the Seagate Wireless
Plus to the NTFS format.
Important: Reformatting erases all of the data on the Seagate Wireless Plus.
1. Copy any data that you want to keep from the Seagate Wireless Plus to another device.
2. Eject and disconnect any other USB drives from your Mac.

4. Getting Help
Seagate Wireless Plus User Guide 11
3. Attach the Seagate Wireless Plus to your Mac.
4. Install the NTFS driver included on the Seagate Wireless Plus.
You can also find this driver on the Seagate download page.
5. On your Mac, open Finder, click Go, and then click Utilities.
6. Double-click Disk Utility.
7. Select the Seagate Wireless Plus drive or Seagate USB.
8. Click the Erase button.
9. For Format type, select Windows NT File System (do not select the compressed
option).
10. Enter a recognizable name, for example, Seagate Wireless Plus drive.
This is the name that appears on the Desktop when you connect the Seagate Wireless
Plus to your Mac.
The Seagate Wireless Plus should be ready to use withing a few minutes. You may need
to eject the device by dragging it to the trash can and then disconnect and reconnect it to
gain full read and write capability.
11. You can now setup the Seagate Wireless Plus for your use.
Remember: If you are using Time Machine, do not allow the program to use the Seagate
Wireless Plus drive for backup.
The Seagate Wireless Plus shuts down by itself
Your Seagate Wireless Plus includes a power-save feature, which means that it enters a
standby state after 5 minutes of inactivity. Your device automatically returns to active mode
whenever someone attempts to access it.
I know the Seagate Wireless Plus is broadcasting, but I can’t stream from it
Up to five wireless-enabled devices can stream from the Seagate Wireless Plus at one
time.To see how many devices are currently connected to the Seagate Wireless Plus, open
the Seagate Media app on a connected device and tap Users.
The Seagate Wireless Plus beeps when I plug it in to my computer
The battery is low. Connect your Seagate Wireless Plus to a power outlet using the included
USB to DC adapter and charge the device.