Seagate BlackArmor WS 110 User manual

FCC DECLARATION OF CONFORMANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
WWW.SEAGATE.COM
Visit us at our Support pages for assistance with
•Installation: Additional instructions and troubleshooting assistance
•Knowledge Base: FAQ’s, How to use this product
•Download Center: Installation software, utilities, and diagnostics
•Warranty Information
•And all of your other storage needs
A soft copy of your comprehensive User Guide is included with your product.
To contact Support, visit us at our Contact Us page.
?
©2009 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave
logo, and BlackArmor are trademarks or registered trademarks of Seagate Technology LLC or
one of its affiliated companies in the United States and/or other countries. All other trademarks
or registered trademarks are the property of their respective owners. Seagate reserves the right
to change, without notice, product offerings or specifications.
PN: 100578525 06/09
QUICK START GUIDE
Seagate Technology LLC
920 Disc Drive
Scotts Valley, CA 95066
U.S.A.
www.seagate.com
100578525_WS110 US QSG_r2.indd 1
100578525_WS110 US QSG_r2.indd 1
6/19/09 6:16:51 PM
6/19/09 6:16:51 PM
Print Date:2009-Sep-4 16:21:00 CDT Released; Prod Rel; A; 100578525 Seagate Confidential

THANKS FOR PURCHASING A BLACKARMOR®WS 110 EXTERNAL DRIVE
KIT CONTENTS OPTIONAL
AC Adaptor USB Cable Seagate BlackArmor WS 110 Drive
Stand
eSATA Cable
Cable not included.
Power
1Connect
2Install
After drive is connected, software
installer automatically launches or
double-click Setup.exe on drive.
Visit http://support.seagate.com/
autorun for additional instructions.
Follow the on-screen instructions.
RECOMMENDED: Create Recovery CD
Be sure to create a system recovery CD using
BlackArmor Backup Software. Your system and
data can be restored using this CD. See the
BlackArmor Backup User Guide for instructions.
3
To begin the installation process using an eSATA
cable, double-click the My Computer icon,
then BlackArmor Drive to locate Setup.exe.
100578525_WS110 US QSG_r2.indd 2
100578525_WS110 US QSG_r2.indd 2
6/19/09 6:16:52 PM
6/19/09 6:16:52 PM
Print Date:2009-Sep-4 16:21:00 CDT Released; Prod Rel; A; 100578525 Seagate Confidential