Sealey CP20VRPX User manual

20V Ø180MM BRUSHLESS ROTARY
POLISHER - BODY ONLY
MODEL NO: CP20VRPX
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
 reand/orseriousinjury.
WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this
polisher.
9Save all warnings and instructions for future reference.
1.2. WORK AREA SAFETY
9Keep work area clean and well lit. Cluttered or dark areas invite accidents.
8DO NOT operate power tools in explosive atmospheres, such as in the presence of ammableliquids,gasesordust.Powertools
create sparks which may ignite the dust or fumes.
9 Keepchildrenandbystandersawaywhileoperatingapowertool.Distractionscancause you to lose control.
1.3. PERSONAL SAFETY
9Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
 tiredorundertheinuenceofdrugs,alcoholormedication.Amomentofinattentionwhileoperatingpowertoolsmayresultinserious
 personalinjury.
9 Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,
 hardhat,orhearingprotectionusedforappropriateconditionswillreducepersonalinjuries.
9 Preventunintentionalstarting.Ensuretheswitchisintheo󰀨-positionbeforeconnectingtopowersourceand/orbatterypack,picking
up or carrying the tool.
9 Carryingpowertoolswithyourngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
9 Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.
8DO NOToverreach.Keepproperfootingandbalanceatalltimes.Thisenablesbettercontrol of the power tool in unexpected
situations.
9Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhair,clothingand gloves away from moving parts. Loose clothes,
 jewelleryorlonghaircanbecaughtinmovingparts.
9If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
1.4. POWER TOOL USE AND CARE
8DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterandsafer
at the rate for which it was designed.
8DO NOTusethepowertooliftheswitchdoesnotturnitonando󰀨.Anypowertoolthatcannotbecontrolledwiththeswitchis 
 dangerousandmustberepaired.
WARNING!Removethebatterypackfromthepowertoolbeforemakinganyadjustments,changingaccessories,or  
storing power tools.
9Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
 operatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.
9 Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakageofpartsandanyotherconditionthatmaya󰀨ect
 thepowertool’soperation.Ifdamaged,havethepowertoolrepairedbeforeuse.Manyaccidentsarecausedbypoorlymaintained
power tools.
9 Usethepowertool,accessoriesandtoolbitsetc.inaccordancewiththeseinstructions,takingintoaccounttheworkingconditions
 andtheworktobeperformed.Useofthepowertoolforoperationsdi󰀨erentfromthoseintendedcouldresultinahazardous 
situation.
1.5. SERVICE
9 Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.Thiswillensurethatthesafetyof
the power tool is maintained.Unauthorisedpartsmaybedangerousandwillinvalidatethewarranty.
1.6. SPECIFIC POLISHER SAFETY
9WARNING!Disconnectthebatteryandensurethatthepadisatacompletestandstillbeforechangingaccessories,servicingor 
performing any maintenance.
WARNING! Keep all guards and holding screws in place, tight and in good working order.
9 Checkregularlyfordamagedparts.Aguardorotherpartthatisdamagedmustberepaired/replacedbeforethepolisherisnextused.
Original Language Version
© Jack Sealey Limited
Refer to
instructions Wear eye
protection Wear protective
gloves Wear ear protection
Wear protective
clothing Wear a mask
CP20VRPXIssue2(3)22/02/22

9 Keepthepolishercleanforbestandsafestperformance.
9Before each use check all attachments for condition. If worn or damaged replace immediately.
8DO NOTswitchthepolisheronuntiltheheadisincontactwiththepanelandswitchtheunito󰀨beforeremovingtheheadfromthe
panel.
8DO NOTusethepolisherwithabrasivecleanersorrubbingcompoundsasexcessivepaintremovalmayresult.
8DO NOT get the polisher wet or use in damp or wet locations or areas where there is condensation.
8DO NOT allow untrained persons to operate the polisher.
9When not in use, unplug from the mains power supply and store in a safe, dry, childproof area.
2. INTRODUCTION
Powerfulcordlessrotarypolisher–bodyonly.Brushlessmotorgivessuperiorperformanceanddurability.Durablecompositehousingwith
softgripforaddedcomfort.Ø180mmbackingpad.Sixspeedsettingsandvariablespeedtriggerwithlocko󰀨ercompletecontrolrequired
foranygiventask.Withtwohandlepositions,upandoverorsideforpersonalpreference.Suppliedwithtwointerchangeablepolishingpad
headsandkeyforquickbackingpadchanges.Requirescompatible20Vbatteryandmainscharger,soldseparately.
3. SPECIFICATION
MODEL NO: ........................................................CP20VRPX
Battery: ........................ CP20VBP2,CP20VBP4,CP20VBP6
Free Speed:..................................................800-2300RPM
NoisePower/Pressure: ........................................89/78dB(A)
PadSize: ................................................................ Ø180mm
ThreadSize: ...................................................................M14
Vibration/Uncertainty:.........................................5.39/1.5m/s²
CONSUMABLES:
MainsCharger(notincluded):CP20VMC
4. ASSEMBLY
WARNING!Ensurethatyouread,fullyunderstand,andapplythesafetyinstructionsbeforeuse.
WARNING!Ensurebatteryisnotttedbeforeassembly.
4.1. INSTALLING/REMOVING BACKING PAD (g.1)
4.1.1. Toinstallthebackingpad,presstheshaftlockbutton(g.1.1)topreventspindlerotationandthenturnthebackingpad(g.1.2) 
 anticlockwiseasfarasitcango.Toremovethebackingpad,followtheinstallprocedureinreverse.
4.2. ADJUST HANDLE ANGLE(g.2)
4.2.1. Loosenthehexboltonbothsidesofthetoolanticlockwisewithahexwrench(g.2.1)andthenadjusttheangleoftheauxiliary 
 handle.Selectonepositionsuitableforyourwork.
4.2.2. Tightenthehexboltonbothsidesclockwiseasfarasitcango.
4.3. INSTALLING/REMOVING POLISHING PAD
4.3.1. Toinstallthepad,rstremovealldirtandforeignmatterfromthehook-and-loopsystemofthepadandthebackingpad.Attachthe
 padtothebackingpadsothattheiredgesarealigned.
4.3.2. Toremovethepadfromthebackingpad,justpullupfromitsedge.
4.4. SWITCHING ON/OFF(g.3)
4.4.1. Depresstriggerlockbutton(g.3.1)toenablethetrigger(g.3.2)tobepulled.
4.4.2. Toolspeedcanbeadjustedbysqueezingorreleasingthetrigger.
4.4.3. Tostopthetool,fullyreleasethetrigger.
Original Language Version
© Jack Sealey Limited
1
21
g.1
g.2
1
2
g.3
CP20VRPXIssue2(3)22/02/22

4.5. SPEED ADJUSTMENT (g.4)
4.5.1. Thetoolhas6speedsettings.Rolltheswitchselector(g.4.1)totherequiredvalue.
5. MAINTENANCE
WARNING!Beforeattemptinganymaintenance,removethebattery.
WARNING! Wear approved safety eye protection and respiratory protection.
5.1. Keep the machine clean and dry. DO NOTuseabrasivesorsolventsto
clean the unit. Ensure all external head screws are tight.
5.2. Regularly clean the dust covers on the air vents for smooth air circulation.
5.3. Removethedustcoversandcleanthemesh(g.5).
5.4. Whennotinuse,removethebatteryandstoreinasafe,drychildprooflocation.
WARNING! – Risk of Hand Arm Vibration Injury.
This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.
Thistoolistobeoperatedinaccordancewiththeseinstructions.
Measured vibration emission value (a): ..........5.39 m/s²
Uncertainty value (k):...........................1.5 m/s²
Please note that the application of the tool to a sole specialist task may produce a different average vibration emission. We recommend that a
specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.
Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeachtool.
NB: StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.
Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.
Suchfactorsinclude;theoperator,thetaskandtheinsertedtoolorconsumable.
NB:ensurethatthelengthofleaderhosesissufficienttoallowunrestricteduse,asthisalsohelpstoreducevibration.
State of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase risk of Hand Arm Vibration Syndrome.
Health surveillance.
Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescanbemodified
accordingly.
Personal protective equipment.
Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe
uncontrolleduseofthistool.Werecommendasufficientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarmanddryand
maintaingoodbloodcirculationinfingersetc.Pleasenotethatthemosteffectiveprotectionisprevention,pleaserefertotheCorrectUseand
Maintenancesectionintheseinstructions.GuidancerelatingtothemanagementofhandarmvibrationcanbefoundontheHSCwebsite
www.hse.gov.uk-Hand-ArmVibrationatWork.
Original Language Version
© Jack Sealey Limited CP20VRPXIssue2(3)22/02/22
g.5
g.4
1
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
WEEE REGULATIONS
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid
waste authority for recycling information.
BATTERY REMOVAL
UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts
containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack
SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important:NoLiabilityisacceptedforincorrectuseofthisproduct.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.