SECO-LARM DH-151SQ User manual

SECO-LARM Magnetic Door Holders
4
D
H
-
151SQ
:
Dimensions:
NOTICE
:
The SECO
-
LARM policy is one of continual evelopment an improvement. For that reason, SECO
reserves the right to change specifications without notice. SECO-
LARM is not responsible for misprints. Tra emarks are the
property of SECO-LARM U.S.A., Inc. or their respective owners.
Copyright © 2016 SECO-
LARM U.S.A., Inc. All rights reserve . This material may not be repro uce or copie , in whole or
in part, without the written permission of SECO-LARM.
LIMITED
WARRANTY:
This SECO-LARM pro uct is
warrante against efects in material an workmanship while
use in normal service for two (2) years
from the ate of sale to the original customer.
the repair or replacement of any efective part if the unit is returne
, transportation prepai , to SECO
is voi if amage is cause by or attribute to acts of Go , physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any oth
equipment is not operating properly as a result of causes other than efects in material an workmanship.
obligation of SECO
-
LARM an the purchaser’s exclusive reme y, shall be limite to the replacement or
SECO-LARM’s option. In no event shall SECO-
LARM be liable for any special, collateral, inci ental, or consequential
personal or property amage of any kin to the purchaser or anyone else.
SECO
-
LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Website: www.seco
Phone: [phone] | [phone]
Email: sales@seco
Magnet
:
1
"
(26mm)
D
H
-
171SQ
:
Back
1
1
/
16
"
(26mm)
Si e
2
1
/
16
"
(52
mm)
Front
4
5
/
8
"
(116.5mm)
2
3
/
4
"
(70mm)
Si e
3"
(76mm)
3
3
/
8
"
(85mm)
13/4"
(45mm)
2"
(51
mm)
SECO-LARM U.S.A., Inc.
LARM policy is one of continual evelopment an improvement. For that reason, SECO
-
LARM
LARM is not responsible for misprints. Tra emarks are the
LARM U.S.A., Inc. All rights reserve . This material may not be repro uce or copie , in whole or
warrante against efects in material an workmanship while
from the ate of sale to the original customer.
SECO-
LARM’s obligation is limite to
, transportation prepai , to SECO
-LARM.
This Warranty
is voi if amage is cause by or attribute to acts of Go , physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any oth
er reason SECO-
LARM etermines that such
equipment is not operating properly as a result of causes other than efects in material an workmanship.
The sole
LARM an the purchaser’s exclusive reme y, shall be limite to the replacement or
repair only, at
LARM be liable for any special, collateral, inci ental, or consequential
personal or property amage of any kin to the purchaser or anyone else.
Website: www.seco
-larm.com
PITVW2
Email: sales@seco
-larm.com MI_DH-1x1SQ_160420. ocx
Armature:
Front
2
9
/
16
"
(65
mm)
2
9
/
16
"
(65
mm)
Si e
1
9
/
16
"
(40mm)
Door
Installation
1
9
/
16
"
(40mm)
1
3
/
4
"
(44mm)
2
9
/
16
"
(65mm)
mm)
Magnetic Door Hol ers
Manual
•
For use with oor closers to control the
release an closing of resi ential,
commercial, an public area oors
•A justable armature plate re uces
installation time an a justs to oor
alignment changes
•Surface-mount or flush-mount
mo els available
•Fail-safe operation
•Low profile esign
•
Hol ing force
•
3 voltages: 12/24 VAC/VDC, an 120VAC
•
Extension bars available:
(13mm, 19mm, 25mm, 50mm)
•
Cast aluminum faceplate
•
No resi ual magnetism for easy release
•Built-
in voltage spike suppressor
•
Use with SECO
SD-
C121
SD-
C101
Features:
DH
-
1 1SQ
Surface
-
DH
-
171SQ
Flush
-
mount
DH
-
151SQ
Magnetic Door Hol ers
Hol ing force
– 33-lb (15kg)
3 voltages: 12/24 VAC/VDC, an 120VAC
Extension bars available:
1
/
2
",
3
/
4
", 1", 2"
(13mm, 19mm, 25mm, 50mm)
Cast aluminum faceplate
No resi ual magnetism for easy release
in voltage spike suppressor
Use with SECO
-LARM oor closers
C121
-S, SD-131-SQ, SD-C101-SGQ,
C101
-SBAQ, or SD-C101-SBBQ
-
mount
mount
D
H
-
17
1SQ

SECO-LARM Magnetic Door Holders
2SECO-LARM U.S.A., Inc.
Introduction:
The
SECO
-
LARM
Magnetic Door H
ol ers are esigne for virtually any remote oor release
applications. The UL Liste SECO-LARM Magnetic Door Hol ers, use in conjunction with
UL Liste SECO-LARM oor closers, control the release an closing of resi ential, commercial,
an public area oors inclu ing apartments, schools, hotels, hospitals, an offices. Fail-safe
operation, tri-volt coils, an a justable armature plate allows for easy an flexible installation.
SECO-LARM Magnetic Door Hol ers also come in surface-mount or flush-mount mo els with full
mounting har ware inclu e .
Model
DH
-
1 1SQ
DH
-
171SQ
Installation
Surface
-
mount
Flush
-
mount
Current draw
52mA@12VAC,
60mA
@12VDC
27mA@24VAC, 31m@24VDC
24mA@120VAC
Holding force
33
-
lb (15kg)
Magnet box dimensions
2
3
/
4
"
4
9
/
16
"x3"
(70x116.5x76 mm)
2
3
/
4
"
x4
9
/
16
"
x2
1
/
16
"
(70x116.5x52 mm)
Door armature dimensions
2
9
/
16
"
x2
9
/
16
"
x 1
9
/
16
"
(
65x
65x40 mm)
Magnet box weight
1
-
lb
6
.4
-
oz
(920g)
1
-
lb 1.5
-
oz
(468g)
Door armature weight
8.1
-
oz
(230g)
Operating voltage
12 VAC/VDC, 24 VAC/VD
C, 120VAC
Specifications:
Parts List:
1x Door hol er
1x
Armature plate
1x Back box (DH
-
151SQ only)
1x Manual
2x Jumper
2x #10*1
1/4
" Woo screws
4x 4*8 Machine screws
2x 3*10 Machine screws
2x 5*15 Machine screws
Wiring Diagram:
For 12VAC/VD
C
For 24VAC/VD
C
For 120
VAC
Voltage
Selector
Jumper
( - ) ( + ) ( - ) ( + ) ( - ) ( + )
COM 12V 24V 120V
COM 12V 24V 120V
COM 12V 24V 120V
Available Accessories:
DH
-
1
00
E
-
05SQ
1
/
2
"
(13mm
) Extension Bar
DH
-
100E
-
10
SQ
1"
(
25mm)
Extension Bar
DH
-
100E
-
07
SQ
3
/
4
"
(
19mm
) Extension Bar
DH
-
100E
-
20
SQ
2
"
(50
mm)
Extension Bar
SECO
SECO-LARM U.S.A., Inc.
Installation:
Voltage Settings:
Set the voltage using the jumpers as in the iagram.
NOTE:
Factory efault is 120VAC. To avoi personal injury
the jumper setting matches the wiring connections (See “Wiring Diagram:”
supplie voltage. Improper settings/wiring will voi the warranty an SECO
responsible for any resulting injury.
Wiring Terminals:
(See "Wiring Diagram:" Pg. 2)
1.
Determine mounting location of both the Magnetic Door Hol er an the Armature Plate.
the power
wires to that location in compliance with any local co es.
2. Select the voltage (two jumpers for 12VAC/VDC,
or a single jumper for
120VAC) for the Door Hol er (See "Voltage Settings:" below)
3. For the DH-1 1SQ (Surface-Moun
t Magnetic Door Holder)
a.
Mount the back box to the location where your wires are run an connect the wires
accor ing to the wiring iagram on page 2.*
b.
Finish screwing own the unit to the back box an test the unit.
4. For the DH-171SQ (Flush-Mount Magnetic
Door Holder)
a. Connect the wires accor ing to the wiring
iagram on page 2.*
b. Finish screwing own the unit to the single-
gang box an test the unit.
5. Mount the Armature Plate to the oor an make
sure it lines up with the oor hol er (Extensions
available if nee e , See pg. 2).
6. Double check all connections an mountings to
make sure the installation is complete.
*IMPORTANT: The wiring connections must match the
voltage jumper settings an the supplie voltage.
SECO
-LARM Magnetic Door Holders
3
Factory efault is 120VAC. To avoi personal injury
or amage to the pro uct, ensure that
the jumper setting matches the wiring connections (See “Wiring Diagram:”
on page 2) an the
supplie voltage. Improper settings/wiring will voi the warranty an SECO
-LARM will not be
Voltage Selector Jumper
Determine mounting location of both the Magnetic Door Hol er an the Armature Plate.
Run
wires to that location in compliance with any local co es.
or a single jumper for
24VAC/VDC or
120VAC) for the Door Hol er (See "Voltage Settings:" below)
an a just the jumpers.
t Magnetic Door Holder)
:
Mount the back box to the location where your wires are run an connect the wires
Finish screwing own the unit to the back box an test the unit.
Door Holder)
:
Door Hol er
Door Armature
12 VAC/VDC
24 VAC/VDC
120VAC