SECO-LARM Enforcer EVT-PB1-V1TSQ User manual

PassiveVideoBalunsd.cdr
®
EVT-PB1-V1TSQ
Power
RJ-45
Crimping
Tools
Compact
Size
Long
Range
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: [phone]
Email: [email protected] Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Transmits a monochrome video signal up to 2,000 feet
(610m) or color up to 1,300 feet (400m).
Passive operation - No external power required.
Uses low-cost CAT 5 cable instead of costly coaxial cables.
High immunity from interference - Built-in impedance
coupled device and noise filter.
Gold-plated BNC connector for reliability and longer life.
Small size for easy installation.
The fast, easy, and low-cost way to connect a CCTV camera
to a monitor, multiplexer, or video recorder.
All SECO-LARM passive video baluns transmit the video
signal of a single CCTV camera long distances over low-cost
CAT 5 unshielded twisted pair (UTP) cable.
The EVT-PB1-V1TSQ features a built-in transient surge
protection circuit to help protect sensitive video security
equipment from power spikes.
The EVT-PBP-V1TQ features a 6-inch BNC pigtail connector
for easy connections in tight spaces.
EVT-PB1Q
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
Quick-connect screwless terminal Block
6-Inch BNC pigtail connector
Surge protection
EVT-PB1Q
EVT-PBP-V1TQ
Screw terminals for reliable
installation.
Surge protection.
Typical Installation:
Mount multiple baluns behind
multiplexor without pigtails.
{
ENFORCER
Color - 1,300' (400m)
B/W - 2,000' (610m)
Multiplexer or Quad or DVR
Monitor
Dome Cam
Bullet Cam
Camera
CAT 5
CAT 5
CAT 5
CAT 5
CAT 5
CAT 5
6-Inch BNC pigtail connector.
Screw terminals for reliable
installation.
Quick-connect screwless
terminal block - No need to
waste time crimping RJ-45
connectors.
2-7/16” x 3/4” x 5/8”
(61 x 19 x 15.5 mm)
2” x 19/32” x 19/32”
(50 x 15.4 x 15.4 mm)
2-1/4” x 19/32” x 19/32”
(57 x 15.4 x 15.4 mm)
Passive Video Baluns

Technical Specifications:
Video Format RS170, NTSC, PAL, SECAM, CCIR
Maximum Input 1vpp
Insertion Loss < 2dB per pair from DC ~5 Mhz
Return Loss >-15dB from DC ~5 Mhz
Frequency Response DC ~5 Mhz
Attenuation DC ~5 Mhz, 1.5 dB max
Common Mode Rejection 60 dB, 15 KHz~5 MHz
Impedance: Coax, Male BNC 75 Ohms @ 1 MHz
Terminal Block 100 Ohms @ 1 MHz
Power No power required
Temperature Range
Humidity Range 0 ~ 95%
Wire Type UTP (Unshielded Twisted Pair) 16 - 24AWG
Wire Category CAT2 or better, CAT5 ideal, CAT6 improves range
oo oo
14 ~165 F (-10 ~74 C)
Surge Suppression (EVT-PB1-V1TSQ):
Built-in Transient Voltage Surge Suppressors
Reverse Stand-Off
Voltage Vrwm(V)
Breakdown
Voltage Vbr (V)
MIN.@1T
Breakdown
Voltage Vbr (V)
Test Current
1t (mA)
Maximum Clamping
Voltage @1pp Vc(V)
Peak Pulse
Current 1pp
(A)
Reverse Leakage
8.55 9.5 10.5 1 14.5 42.1 10
EVT-PB1-V1TSQ
Email: [email protected] Website: ww w.seco-larm.com
1.949.261.2999 (C
A & Int’l) 1.800.662.0800 Fax: [phone]
16842 Millikan Avenue, Irvine, CA 92606 PassiveVideoBalunsd.cdr
@ VRWM 1r(uA)
®
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2009 SECO-LARM U.S.A., Inc. Allrights reserved.
EVT-PB1Q EVT-PBP-V1TQ
UTP Connection Screwless Terminal Block
Case ABS Plastic
Weight
Size 735
2/16" x /4" x /8"
61 x 19 x 15.5 mm
0.8 oz. (22.7g)
Terminal Block Terminal Block
0.9 oz. (22.7g) 0.8 oz. (22.7g)
1 19 19
2/4" x /32" x /32”
57 x 15.4 x 15.4 mm
19 19
2” x /32" x /32"
50 x 15.4 x 15.4 mm
Transient Surge No No Yes
Passive Video Baluns
EVT-PB1-V1TSQ
EVT-PB1Q
EVT-PBP-V1TQ