SECO-LARM SLI ENFORCER NS-104UT-MAQ User manual

®
NS-104UT-MAQ, NS-508UT-GAQ
Unmanaged PoE Switches
Manual
Features:
•
Provides both Ethernet data and power to
multiple PoE devices including IP cameras,
IP access, IP speakers/intercoms, VOIP, etc
•Specially designed for video transmission
with fast packet forwarding capability for
clear images and smooth transmission
•Easy plug-and-play installation
•
Supports 10,100BaseT (NS-508UT-GAQ
supports up to 1000BaseT Gigabit)
•Conforms to IEEE 802 3, IEEE 802 3u,
IEEE 802 3af, IEEE 802 3at
(NS-508UT-GAQ also conforms to
IEEE 802 3ab)
•IEEE 802 3x Flow control
Model Ethernet Ports andwidth VLAN Power
NS-104UT-MAQ 10/100Base-TX 4 Downlink, 2 uplink 1 2Gbps Yes 60W Adapter
NS-508UT-GAQ 10/100/1000Base-TX 8 Downlink, 2 uplink 20Gbps No 120W Built-in
NS-508UT-GAQ shown

ENFORCER Unmanaged PoE Switches
2SECO-LARM U.S.A., Inc.
NS
-
104UT
-
MAQ
Overview:
ENFORCER
Unmanaged
PoE Switches provide Ethernet and power to PoE devices
such as IP
cameras, IP access control, IP speakers/intercoms, IP telephony, etc Fast packet forwarding
capability and extra backplane bandwidth ensure clear images at fast transmission speeds for
video, making them well-suited for HD CCTV installations
1x
PoE Switch
1x
AC Power cord
1x
Power adapter*
1x
Manual
*NS-104UT-MAQ only
Model
NS
-
104UT
-
MAQ
NS
-
5
0
8
UT
-
G
AQ
Operating voltage
48~57 VDC*
100~240 VAC
Power consumption
<5W
<15W
Ports
4 Downl
i
nk, 2 uplink
8 Downlin
k, 2 uplink
Ethernet speed
10/100Mbps (uplink, 100Mbps)
10/100/1000Mbps (uplink, 1000Mbps)
Ethernet standard IEEE 802 3, IEEE 802 3u,
IEEE 802 3af, IEEE 802 3at
IEEE
802 3, IEEE
802 3u,
IEEE 802 3af, IEEE 802 3at,
IEEE 802 3x, IEEE 802 3ab
Transmission distance
328ft (100m)
†‡
328f
t (100m)
†
PoE Capacity
55W
120W
Switching capacity
1 2G
bps
20G
bps
Transfer
rate
10Mbps
14,880pps
100Mbps
148,800pps
1000Mbps
N/A
1,488,000pps
MAC Address table
1K
4k
LED Indicators
Connection/transmission and PoE for each po
rt
, power
Operating humidity
0~85% Non
-
condensing
0~85% Non
-
condensing
Operating t
emperature
-
40
°~
158
° F (
-
40
°~
70
° C)
-
40
°~
158
° F (
-
40
°~
70
° C)
Dimensions
4"x
7
/
8
"
x2
15
/
16
"
(
102
x
22
x
75
mm)
7
7
/
8
"x2
3
/
4
"
x4
5
/
8
"
(
200
x
44
x
118
mm
)
Weight
6 8
-
oz (
194
g)
1
-
lb
12 4
-
oz (
806
g)
Specifications:
Introduc
tion:
Parts List:
2
15
/
16
"
(75mm)
4
"
(102mm)
7
/
8
"
(22mm)
PoE
LED
Link/Active
LED*
*Flashing green when data is being transmitted
Power LED
Uplink ports
Power input
VLAN Switch
Downlink
ports
PoE
IN
Link/Act
DC In
Uplink
On / Off
Power
PoE
1 2
5
3
6
4
4-Port PoE Switch
*Power adapter included
†
Distance depends on Ethernet cables used Cat5e/6 recommended
‡
656ft (200m) at 10Mbps with VLAN switch ON

ENFORCER Unmanaged PoE Switches
SECO-LARM U.S.A., Inc. 3
Sample Installation
:
NS
-
508UT
-
GAQ Overview:
7
7
/
8
"
(200
mm)
4
5
/
8
"
(118mm)
Power LED
8 Downlink
ports
2 Uplink
ports
100~240
VAC Power
input (on
back panel)
1
3
/
4
"
(44mm)
PoE
LED
Link/Active
LED*
PoE
IN
*Flashing green when data is being transmitted
8-Port Gigabit PoE Switch
1 3 / 5 7 /
2 4 / 6 8 /
Uplink
G2G1
PoE Link/A ct
Power
Sample
CCTV
Application:
1
Determine the best location for the switch Note that the uplink cable (as well as the PoE
device cable, except for the NS-104UT-MAQ with the VLAN function switch turned ON) cannot
exceed 328ft (100m)
2 If installing the NS-104UT-MAQ, make sure that the VLAN function switch is set correctly
3 Turn off power to both the display device and the PoE device before proceeding Installation
under power will damage the transmission equipment
4 Connect the PoE device(s) to a downlink port on the switch using a Cat5e/6 cable conforming
to either the EIA/TIA 568A or 568B standard
5 Connect the DVR or computer to the uplink port on the switch using a Cat5e/6 cable
conforming to either the EIA/TIA568A or 568B standard
6 Connect the power to the switch and ensure that the power LED and the POE led on any
connected port is on
7 Turn on the display device and ensure that the system is functioning properly
PoE Cameras or other PoE devices
HD
Monitor
DVR
Power adapter
PoE Switch
(NS-104UT-MAQ shown)
Link/Act
DC In
Uplink
On / Off
Power
PoE
1 2
5
3
6
4
4-Port PoE Switch

ENFORCER Unmanaged PoE Switches
4SECO-LARM U.S.A., Inc.
PoE Device doesn't function
correctly
•Confirm that both input and output devices are turned on
•Ensure that the Ethernet cable does not exceed 328ft (100m) or 656ft
(200m) for NS-104UT-MAQ with VLAN function switch turned ON
•Confirm that no PoE equipment power requirement exceeds 30W
•Confirm that the Ethernet cable meets EIA/TIA 568A or 568B standard
and that both ends are the same standard (not a crossover cable)
•Test that the Ethernet cable to ensure that it is operational
•Test with another PoE device that is known to be operating correctly
Troubleshooting:
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website:
www seco
-
larm com
Phone: (949) 261
-
2999 | (800) 662
-
0800
Email:
sales@seco
-
larm com
PICSN7
MI_NS
-
x0xUT
-
xAQ_200611 docx
NOTICE
:
The S
ECO
-
LARM policy is one of continual development and improvement For that reason, SECO
-
LARM reserves
the right to change specifications without notice SECO-LARM is also not responsible for misprints All t
rademarks are the
property of SECO-LARM U S A , Inc or their respective owners Copyright © 2020 SECO-LARM U S A ,
Inc All rights
reserved
WARRANTY:
This SECO
-
LARM product is warranted against
defects in material and workmanship while
used in normal
service for one (1) year from the date of sale to the original customer SECO-
LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM
This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, impr
oper
or abnormal usage, or faulty installation, or if for any other reason SECO-LARM
determines that such equipment is not
operating properly as a result of causes other than defects in material and workmanship The sole obligation of SECO-
LARM
and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s option
In no event
shall SECO-
LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any kind
to the purchaser or anyone else
IMPORTANT
:
Users and installers of this product are responsible for ensuring this produ
ct complies with all national, state,
and local laws and statutes related to monitoring and recording audio and video signals SECO-LARM
will not be held
responsible for the use of this product in violation of any current laws or statutes
FCC COMPLIANCE
STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF TH
E FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2)
THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
Notice: The changes
or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device
is
permitted Any change to the antenna or the device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device