Allen + Roth WSWS-WU1G User manual

welcoming • sophisticated • inspiring
Serial Number Purchase Date
1
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
ITEM #0339207, 0339208, 0339209, 0339210, 0810375
MODEL#WSWS-WU1C, WSWS-WU1W
WSWS-WU1P, WSWS-WU1S, WSWS-WU1G
Français p. 14
Español p. 27
PREMIUM WOOD TOWER
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.
Lowes.com/allenandroth
EB1424 Date: 2016-07-28 Rev. 0001-A

K
J
I
M
32
TABLE OF CONTENTS
Camlock System Operation............................................................................................... 2
Package Contents............................................................................................................... 3
Hardware Contents...............................................................................................................4
Safety Information............................................................................................................... 5
Preparation ......................................................................................................................... 5
Assembly Instructions.......................................................................................................... 6
Care and Maintenance ....................................................................................................... 11
Troubleshooting................................................................................................................... 11
Warranty.............................................................................................................................. 12
Replacement Parts List ...................................................................................................... 12
PACKAGE CONTENTS
K
PART DESCRIPTION QUANTITY
A Hutch Panel Left 1
B Hutch Panel Right 1
C Hutch Panel Top 1
D Hutch Panel Back 1
E Front Curved Stretcher 1
F Front Straight Stretcher 1
G Adjustable Shelf 2
PART DESCRIPTION QUANTITY
H Base Panel Left 1
I Base Panel Right 1
J Base Panel Top 1
K Base Panel Back 1
L Base Panel Bottom 1
M Wall Hanging Cleat 2
N Installation Template 1
F
A
I
H
L
G
D
C
B
E
N
Lowes.com/allenandroth Lowes.com/allenandroth
CAM LOCK SYSTEM OPERATION
1. Screw cam bolts into the predrilled small holes on panel.
2. Insert cam lock into predrilled large hole on panel.
3. Make sure the arrow on the cam lock is pointed toward the cam bolts.
4. Connect both panels together, making sure cam bolts goes into predrilled hole on
the end of panel with cam lock.
5. Once cam bolts is connected inside cam lock, take Phillips screwdriver and tighten
cam lock clockwise.
DETAIL A DETAIL B
THREADED
INSERT
LOCKED POSITION
PANELPANEL
Cam Bolts
CAM LOCK

54
HARDWARE CONTENTS (shown actual size)
PREPARATION
SAFETY INFORMATION
WARNING
Bolt
Qty. 12
Lock
Washer
Qty. 12
Flat
Washer
Qty. 12
Large
Cam Lock
Qty. 34
Medium
Cam Bolt
Qty. 30
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, Level, Power Drill, 3/16 in. Drill Bit,
3/8 in. Drill Bit, 1/2 in. Socket Wrench, Stud Finder, Marking Pencil, Tape Measure, Step Ladder, and
Hammer.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
• Do not allow children to climb or play in or around this product.
• Use this unit for its intended purpose only. Do not use shelves as step ladder.
• To avoid damage, assemble the product on a sturdy, level and protective surface.
• Two or more persons must work together to install the unit onto the wall.
• Make sure all bolts/screws are tightly fastened before the unit is used.
• Check bolts/screws periodically and tighten them if necessary.
• Each shelf maximum load: 30 lbs.
Large
Wood Dowel
Qty. 34
Large
Cam Bolt
Qty. 4
Shelf Pin
Qty. 8
Barrel
Nut
Qty. 4
Lag Bolt
Qty. 4
Allen Wrench
Qty. 1
Large Flat
Washer
Qty. 4
Touch-up Pen
Qty. 1
(not included for
Item #0339209)
AA BB CC DD EE
FF
JJ
GG
KK
HH
LL
II
MM
Lowes.com/allenandrothLowes.com/allenandroth

6 7
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Hardware Used
Base Assembly
Hardware Used
Hardware Used
Hardware Used
Hardware Used
Hardware Used
1. Insert medium cam bolts (EE) into base panel left
(H), base panel right (I) and base panel top (J).
2. Attach base panel back (K) to base panel top (J) using
large wood dowels (FF) and large cam lock (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel top (J) are completely seated.
5. Fit base panel back (K) into slot of base panel bottom
(L), then attach base panel bottom (L) to assembly using
large wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel right (I) are completely seated.
6. Attach base panel left (H) to assembly using large
wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel left (H) are completely seated.
3. Attach base panel right (I) to assembly using large
wood dowels (FF) and large cam locks (DD).
Note: Make sure medium cam bolts (EE) previously
inserted into base panel right (I) are completely seated.
4. From the back of the assembly, attach base panel right
(I) to base panel back (K) using fl at washers (CC), lock
washers (BB) and bolts (AA). Tighten with Allen wrench
(LL). Secure base panel top (J) with large cam locks (DD).
14
25
36
Medium Cam Bolt
Large Cam Lock
Large Cam Lock
Large Cam Lock
Large Cam Lock
Large Cam Lock
Allen Wrench
Bolt
Lock Washer
Flat Washer
Large Wood Dowel
Large Wood Dowel
Large Wood Dowel
Large Wood Dowel
x 12
x 2
x 2
x 4
x 2
x 1
x 1
x 3
x 3
x 3
x 2
x 2
x 5
x 3
EE
DD
DD
DD
DD
DD
LL
AA
BB
CC
FF
FF
FF
FF
Lowes.com/allenandrothLowes.com/allenandroth
FF
FF
FF
FF
DD
DD
DD
DD
AA
BB
CC
DD
EE
EE
J
H
I
K
K
K
K
H
I
I
I
K
I
J
L
L
J
J
J
J
Back Side
Back Side

8 9
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
7 10
811
912
Lowes.com/allenandrothLowes.com/allenandroth
Hardware Used
Hardware Used
7. From the back of the assembly, attach base panel left
(H) to base panel back (K) using fl at washers (CC), lock
washers (BB) and bolts (AA). Tighten with Allen wrench
(LL). Secure base panel top (J) with large cam locks (DD).
9. Attach hutch panel left (A) and hutch panel right (B) to
hutch panel back (D) and either front curved stretcher (E)
or front straight stretcher (F) -- depending on which fi ts
your closet look -- using large wood dowels (FF) and large
cam locks (DD). From the back of the assembly, use fl at
washers (CC), lock washers (BB) and bolts (AA) to secure
unit. Tighten with Allen wrench (LL).
Then, secure assembly with large cam locks (DD).
Large Cam Lock
Bolt
Lock Washer
Flat Washer
x 6
x 6
x 6
x 6
DD
AA
BB
CC
DD
DD
DD
DD
DD
AA
AA
BB
BB
CC
CC
K
D
D
I
J
H
Back Side
Back Side
Back Side
Hardware Used
8. Insert medium cam bolts (EE) into hutch panel left
(A), hutch panel right (B) and hutch panel top (C).
Medium Cam Bolt x 14
EE
Large Wood Dowel x 6
FF
EE
EE
C
C
A
A
A
A
H
A
B
E
E
F
B
B
B
B
J
I
FF
FF
FF
JJ
JJ
KK
FF
FF
FF
Hardware Used
Hardware Used
Hardware Used
10. Insert wood dowels (FF) and large cam locks (DD)
into hutch assembly. Attach hutch panel top (C), tightening
large cam locks (DD) to secure assembly.
12. Insert large wood dowels (FF) and large cam locks
(DD) into the base panel top (J). Then, with the help of
another person, attach the hutch assembly to the base
assembly, tightening the large cam locks (DD) to secure
the unit.
Note: Make sure large cam bolts (JJ) are completely
seated.
11. Carefully rest hutch assembly on its side. Insert barrel
nuts (KK) and large cam bolts (JJ) into the bottom of the
hutch assembly.
Large Cam Lock
Large Cam Lock
Large Cam Bolt
Large Wood Dowel
Large Wood Dowel
Barrel Nut
x 8
x 4
x 4
x 8
x 4
x 4
DD
DD
JJ
FF
FF
KK
Base
Hutch
Hutch Assembly
Large Cam Lock
Allen Wrench
Allen Wrench
Bolt
Lock Washer
Flat Washer
x 1
x 1
x 1
x 3
x 3
x 3
DD
LL
LL
AA
BB
CC

ASSEMBLY INSTRUCTIONS
13
14
15
CARE AND MAINTENANCE
TROUBLESHOOTING
• Periodically check to make certain all components are properly positioned, free from damage and
fi rmly connected.
• Use a soft, clean cloth that will not scratch the surface when dusting.
• Never use water to clean the furniture as it may damage to the fi nish.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
• In the event the furniture is stained or otherwise damaged during use, it is recommended
you call a professional to repair the furniture.
• Keep furniture away from direct sunlight as it may damage the fi nish.
• It is best to keep the furniture in a climate-controlled environment. Extreme temperature and
humidity changes can cause fading, warping, shrinking and splitting of wood.
• Touch-up pen (MM) has been provided (except in Item #0339209) to repair any small nicks or
scratches that may occur during assembly or shipping. If Item #0339209 is damaged and touch-up
is required, apply a quality wood polish to the damaged surface.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Closet tower tilted. The wall hanging cleats are not level. Reinstall the wall hanging cleats and
ensure they are level.
Closet tower can
not hang on the
wall.
The mounting hole locations are not
correct.
Reinstall wall hanging cleats; make
sure the space between two wall
hanging cleats is 39-1/2 in. and the
bottom two mounting holes location is
no less than 31-1/2 in. from the fl oor.
10 11
Lowes.com/allenandrothLowes.com/allenandroth
Wooden Stud
39-1/2 in.
Minimum 31-1/2 in.
16 in.
II
II
HH
HH
M
M
M
M
M
N
Hardware Used
15. Insert shelf pins (GG) where desired in tower, then rest
adjustable shelf (G) on top. Repeat for second adjustable
shelf (G).
Note: Ensure the shelf pins (GG) are level.
Shelf Pin x 8
GG
Hardware Used
13. Using a stud fi nder, locate the edges of the wood
studs. Find the center line of each stud and draw a
vertical reference line on the wall over each one. Position
installation template (N) at desired location on wall.
Note: The bottom of the installation template (N) should
be no less than 31-1/2 in. from the fl oor.
Mark mounting holes with a pencil (not included) and
discard installation template (N). Drill 3/16 in. pilot holes at
marked locations. Then, with the beveled edge facing up,
attach the wall hanging cleats (M) with large fl at washers
(II) and lag bolts (HH).
14. With the help from another person, carefully hang the
unit onto wall hanging cleats (M).
Lag Bolt
Large Flat Washer
x 4
x 4
HH
II
G
G
GG
GG
Wall Hanging Installation
Shelf Installation

1312
PART DESCRIPTION PART #
A Hutch Panel Left *WSWS-WU1C/W/P/S/G-1-HPL
B Hutch Panel Right *WSWS-WU1C/W/P/S/G-2-HPR
C Hutch Panel Top *WSWS-WU1C/W/P/S/G-3-HPT
D Hutch Panel Back *WSWS-WU1C/W/P/S/G-4-HPB
E Front Curved Stretcher *WSWS-WU1C/W/P/S/G-5-FCS
F Front Straight Stretcher *WSWS-WU1C/W/P/S/G-6-FCS
G Adjustable Shelf *WSWS-WU1C/W/P/S/G-7-AS
H Base Panel Left *WSWS-WU1C/W/P/S/G-8-BPL
I Base Panel Right *WSWS-WU1C/W/P/S/G-9-BPR
J Base Panel Top *WSWS-WU1C/W/P/S/G-10-BPT
K Base Panel Back *WSWS-WU1C/W/P/S/G-11-BPB
L Base Panel Bottom *WSWS-WU1C/W/P/S/G-12-BPB
M Wall Hanging Cleat *WSWS-WU1C/W/P/S/G-13-WHC
N Installation Template *WSWS-WU1C/W/P/S/G-26-IT
AA Bolt *WSWS-WU1C/W/P/S/G-15-1-1/4B
BB Lock Washer *WSWS-WU1C/W/P/S/G-16-LW
CC Flat Washer *WSWS-WU1C/W/P/S/G-17-FW
DD Large Cam Lock *WSWS-WU1C/W/P/S/G-18-LCL
EE Medium Cam Bolt *WSWS-WU1C/W/P/S/G-19-MCB
FF Large Wood Dowel *WSWS-WU1C/W/P/S/G-20-LWD
GG Shelf Pin *WSWS-WU1C/W/P/S/G-21-SP
HH Lag Bolt *WSWS-WU1C/W/P/S/G-22-2-1/2LB
II Large Flat Washer *WSWS-WU1C/W/P/S/G-23-LFW
JJ Large Cam Bolt *WSWS-WU1C/W/P/S/G-26-LCB
PART DESCRIPTION PART #
KK Barrel Nut *WSWS-WU1C/W/P/S/G-27-BN
LL Allen Wrench *WSWS-WU1C/W/P/S/G-24-M4AW
MM Touch-up Pen *WSWS-WU1C/W/S/G-25-TUP
Complete Hardware *WSWS-WU1C/W/P/S/G-14-CH
WARRANTY
REPLACEMENT PARTS LIST
REPLACEMENT PARTS LIST
This product (exclusive of shelves) is warranted to the original purchaser. If there is a failure in
this unit due to defects in materials or workmanship, the manufacturer will repair or replace this
item at our discretion without charge. Warranty is void if product has been assembled incorrectly,
misused, abused by overloading, altered in any way or damaged due to accident. This warranty is
not transferable and does not cover chipping, fl aking, scratches, rust, dents, or other damages to
the surfaces of this product. Responsibility of the manufacturer is limited to repair or replacement of
this product. The manufacturer is not responsible for consequential, incidental, or other damages or
losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation may not apply to you. This
warranty gives you specifi c legal rights and you may have other rights which vary from state to state.
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,
Monday - Friday.
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST,
Monday - Friday.
Lowes.com/allenandroth Lowes.com/allenandroth
Printed in Vietnam
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.
K
J
I
M
K
F
A
H
L
G
DC
B
E
N
AA BB CC DD EE
FF
JJ
GG
KK
HH
LL
II
MM

welcoming • sophisticated • inspiring
Numéro de série Date d’achat
14
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant,
appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 20 h (HNE), du lundi au vendredi.
JOIGNEZ VOTRE REÇU ICI
ARTICLE #0339207, 0339208, 0339209, 0339210, 0810375
MODÈLE #WSWS-WU1C, WSWS-WU1W
WSWS-WU1P, WSWS-WU1S, WSWS-WU1G
TOUR EN BOIS HAUT DE GAMME
allen + roth® est une marque de commerce
déposée de LF, LLC. Tous droits réservés.
Lowes.com/allenandroth
Date: 2016-07-28 Rév. 0001-A

K
J
I
M
1615
TABLE DES MATIÈRES
Fonctionnement du système Camloc................................................................................. 15
Contenu de l’emballage....................................................................................................... 16
Quincaillerie incluse..............................................................................................................17
Consignes de sécurité....................................................................................................... 18
Préparation.......................................................................................................................... 18
Instructions pour l’assemblage......................................................................................... 19
Entretien............................................................................................................................. 24
Dépannage......................................................................................................................... 24
Garantie.............................................................................................................................. 25
Liste des pièces de rechange............................................................................................ 25
CONTENU DE L’EMBALLAGE
K
PIÈCE DESCRIPTION QUANTITÉ
A Panneau gauche de l’étagère 1
B Panneau droit de l’étagère 1
C Panneau supérieur de l’étagère 1
D Panneau arrière de l’étagère 1
E Entretoise avant courbée 1
F Entretoise avant droite 1
G Tablette réglable 2
PIÈCE DESCRIPTION QUANTITÉ
H Panneau gauche de la base 1
I Panneau droit de la base 1
J Panneau supérieur de la base 1
K Panneau arrière de la base 1
L Panneau inférieur de la base 1
M Traverse de fi xation au mur 2
N Gabarit pour l’installation 1
F
A
I
H
L
G
D
C
B
E
N
Lowes.com/allenandroth Lowes.com/allenandroth
FONCTIONNEMENT DU SYSTÈME CAMLOC
1. Vissez les vis Camloc dans les petits trous déjà percés sur le panneau.
2. Insérez les attaches Camloc dans les grands trous déjà percés sur le panneau.
3. Assurez-vous que les fl èches sur les attaches Camloc pointent vers les vis Camloc.
4. Reliez les deux panneaux ensemble, en vous assurant que les vis Camloc
s’insèrent correctement dans les trous déjà percés situés à l’extrémité du panneau
sur lequel sont installées les attaches Camloc.
5. Une fois les vis Camloc insérées dans les attaches Camloc, serrez les attaches
Camloc dans le sens des aiguilles d’une montre à l’aide d’un tournevis cruciforme.
DÉTAIL A DÉTAIL B
TIGE
FILETÉE
POSITION DE
VERROUILLAGE
PANNEAUPANNEAU
Vis Camloc
ATTACHE
CAMLOC

1817
QUINCAILLERIE INCLUSE (grandeur réelle)
PRÉPARATION
CONSIGNES DE SÉCURITÉ
AVERTISSEMENT
Boulon
Qté : 12
Rondelle de
blocage
Qté : 12
Rondelle
plate
Qté : 12
Grande attache
Camloc
Qté : 34
Vis Camloc
moyenne
Qté : 30
Assurez-vous de lire et de comprendre l’intégralité du présent manuel avant de tenter
d’assembler, d’utiliser ou d’installer le produit.
Avant de commencer l’assemblage de l’article, assurez-vous d’avoir toutes les pièces. Comparez le
contenu de l’emballage avec la liste des pièces et celle de la quincaillerie incluse. S’il y a des pièces
manquantes ou endommagées, ne tentez pas d’assembler l’article.
Temps d’assemblage approximatif : 60 minutes
Outils nécessaires pour l’assemblage (non inclus) : tournevis cruciforme, niveau, perceuse électrique,
foret de 3/16 po, foret de 3/8 po, clé à douille de 1/2 po, détecteur de montants, crayon, ruban à
mesurer, escabeau et marteau.
CET ARTICLE NE PEUT SUPPORTER QUE LA CHARGE MAXIMALE INDIQUÉE. L’UTILISATION
DE CET ARTICLE AVEC DES PRODUITS DONT LE POIDS DÉPASSE LA CHARGE MAXIMALE
INDIQUÉE PEUT ENTRAÎNER DE L’INSTABILITÉ ET CAUSER DES BLESSURES. RÉPARTISSEZ
LA CHARGE DE FAÇON UNIFORME.
• Ne laissez pas les enfants grimper ou jouer sur l’article ni autour de celui-ci.
• Utilisez cet article uniquement pour l’usage auquel il est destiné. N’utilisez pas les tablettes
comme s’il s’agissait d’une échelle.
• Assemblez l’article sur une surface solide, plane et protectrice, pour éviter de l’endommager.
• Deux personnes ou plus doivent travailler de concert pour installer cet article au mur.
• Assurez-vous que tous les boulons et toutes les vis sont bien serrés avant d’utiliser l’article.
• Vérifi ez les boulons et les vis régulièrement et serrez-les au besoin.
• Charge maximale de chaque tablette : 13,61 kg.
Goujon de
bois long
Qté : 34
Grande vis
Camloc
Qté : 4
Taquet pour
tablette
Qté : 8
Écrou à portée
cylindrique
Qté : 4
Tire-fond
Qté : 4
Clé hexagonale
Qté : 1
Grande rondelle
plate
Qté : 4
Crayon à retouche
Qté : 1
(non inclus avec
l’article #0339209)
AA BB CC DD EE
FF
JJ
GG
KK
HH
LL
II
MM
Lowes.com/allenandrothLowes.com/allenandroth