Seconique OXFORD TABLE User manual

OXFORD TABLE
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE
GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT. ITS USE WILL
INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE NECESSARY TO TIGHTEN
UP THE FIXINGS FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO NOT USE POLISH, DETERGENT
OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A PLACE MAT UNDER HOT OR
COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
PAGE 1 OF 2
DO NOT
USE
SEC/SH/02/18/PU1

OXFORD TABLE
ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
STEP 2 STEP 3
STEP 4 STEP 5
FLIP
OPEN
Place the Table Top(1) bottom-side up on a clean and soft surface.
Attach individual Table Leg(2) using JCBB Bolts(A), inserted with Spring Washer(C) and Flat Washer(B).
Tighten with Allen Key(D). Do not over-tighten JCBB Bolts(A).
Turn table right-side up with the help of another person.
REPEAT THIS ASSEMBLY FOR
EACH LEG
A
C
D
B
B
STEP 1
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT CONTINUE
ASSEMBLY. PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
PARTS LIST
NO.
1
2
QTY
1PC
4PCS
DESCRIPTION
TABLE TOP
TABLE LEG
HARDWARE LIST
NO.
A
B
C
D
QTY
8PCS
8PCS
8PCS
1PC
DESCRIPTION
JCBB BOLTS
SPRING WASHER
FLAT WASHER
ALLEN KEY
1
22
22
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
SEC/SH/02/18/PU1

IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE
GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT. ITS USE WILL
INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE NECESSARY TO TIGHTEN
UP THE FIXINGS FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO NOT USE POLISH, DETERGENT
OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A PLACE MAT UNDER HOT OR
COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
PAGE 1 OF 2
OXFORD CHAIR
ASSEMBLY INSTRUCTIONS
DO NOT
USE
SEC/SH/02/18/PU1

OXFORD CHAIR
ASSEMBLY INSTRUCTIONS
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START
ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT CONTINUE
ASSEMBLY. PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
HARDWARE LIST(FOR TWO CHAIRS)
PARTS LIST(FOR TWO CHAIRS)
NO.
1
2
3
4
5
QTY
2PCS
4PCS
2PCS
4PCS
2PCS
DESCRIPTION
CHAIR BACK
SIDE STRETCHERS
BOTTOM STRETCHERS
FRONT SECTION
CHAIR SEAT
4
1
3
2
4
4
5NO.
A
B
C
D
E
QTY
12PCS
12PCS
12PCS
16PCS
1PC
DESCRIPTION
JCBC BOLTS
SPRING WASHER
FLAT WASHER
SCREW
ALLEN KEY
STEP 1
STEP 2
EAB
C
ABC
2Please Repeat
For Both Sides
E
2
2
3
5
1
D
D
D
PHILLIPS
SCREWDRIVER
1
4
3
D
Attach the Side Stretchers(2) to the Chair Back(1) with Bolt(A),
Spring Washer(B) and Flat Washer(C). Tighten up using Allen Key(E).
Next, insert the Bottom Stretcher(4) to Chair Back(1) with screw(D)
and use Phillips Screwdriver(Not Provided) to drive (D). Do not
tighten completely at this time.
Attach Front Section(3) to Side Stretchers(2) and Bottom
Stretchers(4). Fasten (3) to (2)with Bolt(A), Spring Washer(B)
and Flat Washer(C). Use Allen Key to tighten (A). Fasten (3) to (4)
with Screw(D) and use Phillips Screwdriver (Not Provided) to drive
(D). Fully tighten all the bolts and screw at this time.
Place the Seat(5) bottom- side up on an elevated surface.
Position the chair frame assembly with the legs facing up
as shown.
Center the seat frame to the seat(5). Use a Phillips
Screwdriver to drive screw(D) to fasten the seat to the
Chair Frame.
STEP 3
PAGE 2 OF 2
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
SEC/SH/02/18/PU1