Seconique REGENT User manual

REGENT 3 DRAWER CHEST
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED
WITH THE FITTING KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT
RECEIVES,IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS
FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY
FLAT PACK FURNITURE. DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO
NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.
PAGE 1 OF 11
SEC/SH/05/16/FP1
FOR DOMESTIC USE ONLY

PART LIST
PLEASE CHECK THAT YOU HAVE ALL PARTS LISTED BEFORE YOU START ASSEMBLING. IF YOU
DO FIND THAT SOMETHING IS MISSING, DO NOT CONTINUE ASSEMBLY, PLEASE CONTACT YOUR
SUPPLIER IMMEDIATELY
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PART LIST
TOP PANEL 1PCA
B
C
D
E
BOTTOM PANEL
LEFT SIDE PANEL
RIGHT SIDE PANEL
CENTER CROSSBAR
1PC
PAGE 2 OF 11
F UPPER CROSSBAR
G LOWER CROSSBAR
H DRAWER FRONT PANEL 3PCS
I DRAWER SIDE PANEL LEFT 3PCS
J 3PCS
K DRAWER SUPPORT 6PCS
L DRAWER BACK PANEL 3PCS
M BACK PANEL 2PCS
1PC
1PC
1PC
DRAWER SIDE PANEL RIGHT
1PC
1PC
SEC/SH/05/16/FP1
N DRAWER BOTTOM 3PCS

HARDWARE LIST
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 3 OF 11
No. SHAPE DESCRIPTION Qty.
1 34Pcs8x25mm Wood Dowel 10 Plastic Foot 4Pcs
16Pcs7 15MM
Cam Nut + Bolt
83Sets
Drawer Slide = 350mm
18Pcs
M3.5x15mm Screw
3
18Pcs
M4x38mm Screw
5
12Pcs
M5x8mm Screw (Euro Screw)
2
8Pcs
M5x38mm Screw
6
6Sets9
L Bracket 2Pcs
12
8Pcs13 Tack
8Pcs
11 Screw Cap
4Pcs
M3x16mm Screw4
2Pcs
14 Edge Bracket
Handle (P058) = Metal
Handle Screw M4x20mm
6Pcs15 15mm Cam Cap
REQUIRED ASSEMBLY TOOLS
2Pcs16 Anti-Tip Strap
2Pcs17 M4x30mm Screw
SEC/SH/05/16/FP1

*Install 3sets Drawer Slide to
both side panels as shown.
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 4 OF 11
Step 2 YOU WILL NEED:-
7 16Pcs
YOU WILL NEED:-
8 3Sets
12Pcs
2
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 5 OF 11
YOU WILL NEED:- Step 4
134Pcs
*Assemble all panels to side
panel left as shown.
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 6 OF 11
Step 6
YOU WILL NEED:-
4Pcs6
YOU WILL NEED:-
4Pcs6
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 7 OF 11
Step 8
YOU WILL NEED:- YOU WILL NEED:-
2Pcs
12
4Pcs3
4Pcs7
10 4Pcs
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 8 OF 11
Step 10
YOU WILL NEED:- YOU WILL NEED:-
8Pcs13 4Pcs
4
2Pcs
14
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 9 OF 11
YOU WILL NEED:-
8 3Sets
12Pcs3 18Pcs5
YOU WILL NEED:-
12Sets7
SEC/SH/05/16/FP1

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY
CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PAGE 10 OF 11
YOU WILL NEED:-
8Pcs
11
YOU WILL NEED:-
6Sets9
6Pcs15
SEC/SH/05/16/FP1

PAGE 11 OF 11