Onespace RUSTIC 50-JN18ET User manual

7
,straptnemecalperrofstseuqer,smialcnoecivrestsetsafroF
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
:taetisbewruotisivesaelp,snoitseuqro
ASSEMBLY INSTRUCTIONS
MODEL 50-JN18ET
SUPPLIER CODE: JNFF
RUSTIC INDUSTRIAL CHAIN LINK END TABLE

A
PART DESCRIPTION STOCK# QTY
B
C
PARTS LIST
Board
Side
Rail
51-JN18ETA
51-JN18ETB
51-JN18ETC
2
2
4
1
PART DESCRIPTION
STOCK# 51-JN18ETHA
QTY
2
3
8
8
4
4x12mm Screw
6x35mm Screw
FEET
HARDWARE KIT
ALLEN WRENCH 1
Please look for part indicator on the side of the part. It is either stamped or on a
labeled sticker.

Make two of these.
Attach the sides.

Screw in the feet.

Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
email: [email protected]
www.comfortproducts.net
• DO NOT stand on the table. Do not use the table as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This products is California 93120 Compliant for Formaldehyde.
6 of 6
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR W ARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products' authorized dealers
as shown by
the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort
Products' option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product modi cation, intentional damage, re, misuse, negligence, or exposure
to the elements;
labor or assembly cost. This warranty does not cover the cost of transportation or labor . In no event shall Comfort
Products be liable in either tort or contract for any loss
or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty
is NOT applicable to end user customers who use Comfort Products for rental purposes. This warranty applies only to end-
user customers in the United States.
All warranties are limited to the original purchaser for normal use. The weight capacity is de ned as 100
pounds (unless otherwise
speci ed). For claims or questions concerning this warranty, please visit www. comfortproducts.net /support. e-
mail :
[e-mail]
MODE L : # 50-JN18CT
table