Seconique TORTILLA NEST User manual

DO NOT
USE
!
ASSEMBLY INSTRUCTIONS
54271 - DS
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
TORTILLA NEST OF 2 TABLES
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
CARE AND MAINTENANCE
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
FOR DOMESTIC USE ONLY
PAGE 1
SEC/SH/09/20/DS1

245mm
500mm
500mm
380mm
380mm
S300-303-017-DS1-05
S300-303-017-DS1-06
S300-303-017-DS1-07
S300-303-017-DS1-08
S300-303-017-DS1-09
S300-303-017-DS1-10
GLUE
Ø4,0 x 40CP
1/+
Wooden Cap
A10 D
E
01
16
B16
HARDWARE LIST
C01
1/+
Ø7,0x70
F
8,0x50
2/+ 04
5
6
7
8
21/1
Leg (Large) (Blue Marking)
Side panel (Small)
1
2
2
1/1
1/1
1/1
9
10
Leg (Small) (Yellow Marking) 2
2
1/1
1/1
Top panel (Small)
Front/Rear panel (Small)
Leg (Small) (Blue Marking)
to help identify them during assembly.
Please Note:
The below parts have been number/colour coded
to help identify them during assembly.
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S300-303-017-DS1-01 Top panel (Large) 11/1
Front/Rear panel (Large)
Side panel (Large)
Leg (Large) (Yellow Marking)
2
2
2
1/1
1/1
1/1
PAGE 2
S300-303-017-DS1-02
S300-303-017-DS1-03
S300-303-017-DS1-04
SEC/SH/09/20/DS1
1
2
2
3
3
44
5
5
6
7
78
8
99
10
10

HARDWARE REQUIRED
PARTS REQUIRED
8 - x2
SIDE PANEL (SMALL)
D01
GLUE
C01
TOOLS REQUIRED
Ø7,0x70 mm
B04
F04
Ø8,0x50 mm
(Blue Marking)
Detail 1
B
C
Detail 2
D
GLUE
Detail 1
D01
GLUE
(Blue Marking)
C01
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
Ø7,0x70 mm
B04
Detail 2
(Yellow Marking)
7 - x2
FRONT/REAR PANEL (SMALL)
9 - x2
LEG (SMALL) (YELLOW)
10 - x2
LEG (SMALL) (BLUE)
Small
STEP 1
STEP 2
PAGE 3
380mm
380mm
B
C
Detail 2
Detail 2
Detail 3
D
F
GLUE
Detail 3 Small
X2
SEC/SH/09/20/DS1
7
9
10
8
8

A
Detail 4
PARTS REQUIRED
6 - TOP PANEL (SMALL) x1
E
Detail 5
CENTRALIZE
Detail 4
Detail 5
00000DS
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
HARDWARE REQUIRED
A04
Ø4,0 x 40CP
TOOLS REQUIRED
E08
Wooden Cap
Small
STEP 4
STEP 3
PAGE 4
(Blue Marking)
Detail 1
B
C
Detail 2
D
GLUE
Detail 1
D01
GLUE
(Blue Marking)
C01
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
Ø7,0x70 mm
B04
Detail 2
(Yellow Marking)
2 - x2
FRONT/REAR PANEL (LARGE)
4 - x2
LEG (LARGE) (YELLOW)
5 - x2
LEG (LARGE) (BLUE)
Large
500mm
500mm X2
SEC/SH/09/20/DS1
6
4
52

B04
7,0 x 70mm
D01
GLUE
A
Detail 4
B
C
Detail 2
D
GLUE
Detail 1
PARTS REQUIRED
1 - TABLE TOP x1
HARDWARE REQUIRED
PARTS REQUIRED
3 - x2
SIDE PANEL (LARGE)
C01
HARDWARE REQUIRED
A06
TOOLS REQUIRED
TOOLS REQUIRED
Detail 4
00000DS
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
Detail 5
E
Detail 5
CENTRALIZE
E08
Wooden Cap
Detail 1
Detail 2
Large
Large
STEP 6
STEP 5
PAGE 5
Ø4,0 x 40CP
SEC/SH/09/20/DS1
3
3
1