Seconique BLACK TANDI TRIPLE SLEEPER BUNK BED User manual

TANDI TRIPLE SLEEPER BUNK BED
SAFETY WARNING
-All bunk beds and high beds intended to be assembled by someone other that the
manufacturer or their representative shall contain assembly instructions a
list of the parts supplied and details of any tools required to assemble the bed.
-We recommend that you use the mattress at size: 1900x900x160mm.
-All assembly fastenings should always be tightened properly and that care should be
taken that no fittings are loose.
-Instructions regarding positioning and connection of the means of access.
-The ladder is not for playing on, only use to climb onto the top bunk.
-We recommend only one person on the upper bunk at one time.
-Warning:- The bunk bed or high bed should not be used if any structural part is
broken or missing.
-The top of the mattress shall be at least 160mm below the upper edge of the safety
barriers.
-Warning:- Children can become trapped between the bed and the wall to avoid risk of
serious injury the distance between the top safety barrier and the wall shall not
exceed 75mm or shall be more than 230mm.
-Warning: Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the
bunk bed that are not designed to be used with the bed, for example, but not limited
to ropes, strings, cords, hooks, belts and bags.
-The ventilation of the room is necessary in order to keep the humidity low and to
prevent mold in and around the bed.
-The manufacturer’s instruction must be always followed.
-EN 747-1&2:2012+A1:2015 TEST version.
SEC/SH/10/22/RJ1
BLACK
ASSEMBLY INSTRUCTIONS
TOP BUNK
MAX WEIGHT
100KG
BOTTOM BUNK
MAX WEIGHT
180KG

SEC/SH/10/22/RJ1
Page 02
PARTS LIST
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
Part Code
Part Number Part Description Quantity Carton
1
2
S200-205-014-RJ2-01 Back Le P ost 11
Front Le P ost
S200-205-014-RJ2-02 11
3
4
5
6
7
8
S200-205-014-RJ2-03 Back Right Post 21
Front Right Post
S200-205-014-RJ2-04 41
S200-205-014-RJ2-05 Headboard Crossbar 11
Top Base Centre Rail
S200-205-014-RJ2-06 21 1
S200-205-014-RJ2-07 Top Back Side/Safety Rail 21
Bottom Base Centre Rails
S200-205-014-RJ2-08 11
33
7
6
8
11
13
15
2
1
5
14
9
16
19
19
x2
x2
x21
x21
x2
9
10
11
12
13
14
15
16
17
18
19
S200-205-014-RJ2-09
S200-205-014-RJ2-10
S200-205-014-RJ2-11
S200-205-014-RJ2-12
S200-205-014-RJ2-13
S200-205-014-RJ2-14
S200-205-014-RJ2-15
S200-205-014-RJ2-16
S200-205-014-RJ2-17
S200-205-014-RJ2-18
S200-205-014-RJ2-19
Bottom Base Siderail
Top Bunk Slats
Top Bunk Fixed Slats
Bottom Bunk Slats
Bottom Bunk Fixed Slats
Front Safety Rail
Headboard Frame
Bottom Front Siderail
Ladder Side
Ladder Steps
Centre Support Legs
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
21
2
1
21
2
1
4
5
15
3
10
17
17
12
18
18
18
18

SEC/SH/10/22/RJ1
Page 03
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
HARDWARE LIST
A
B
8PCS
8PCS
M6 x 15mm Bolt
M6 x 20mm Bolt
HARDWARE NAME QTY
REF
D
E
4PCS
27PCS
M6 x 45mm Bolt
M6 x 70mm Bolt
G
H
4PC
2PCS
M6 x 50mm Bolt
Anti-Tip
F
10PCS
39PCS
M6 x 40mm Bolt
1.5 x 18(
J
K
1PC
1PC
Allen Key M4
Spanner
I4PCS
Nut M6
Ø6.5) Washer
TWO PEOPLE ARE NEEDED TO ASSEMBLE THIS BUNK BED.

STEP 1
STEP 2
SEC/SH/10/22/RJ1
Page 04
1 - x1
BACK LEFT POST
PARTS REQUIRED
HARDWARE REQUIRED
2 - x1
FRONT LEFT POST
TOOLS REQUIRED
HARDWARE REQUIRED
A02
E04
F06
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
F
F
F
F
F
F
A
A
E
E
E
E
2
1
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
5
15
5 - x1
HEADBOARD CROSSBAR
15 - x1
HEADBOARD FRAME
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
F
F
F
F
F
F
A
A
E
E
E
E
4
3
5
15
3 - x1
RIGHT BACK POST
PARTS REQUIRED
HARDWARE REQUIRED
4 - x1
FRONT RIGHT POST
TOOLS REQUIRED
HARDWARE REQUIRED
A02
E04
F06
5 - x1
HEADBOARD CROSSBAR
15 - x1
HEADBOARD FRAME

STEP 3
STEP 4
SEC/SH/10/22/RJ1
Page 05
8 - x2
BOTTOM BASE CENTRE RAIL
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
7 - x1
TOP BACK SIDE/SAFETY RAIL
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
19- x2
CENTRE SUPPORT LEGS
8
8
19
19
AA
AA
A02
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
9 - x1
BOTTOM BACK SIDERAIL
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
E10
F10
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
9
7

STEP 5
STEP 6
SEC/SH/10/22/RJ1
Page 06
6 - x1
TOP BASE CENTRE RAIL
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
C02
10 - x21
TOP BUNK SLATS
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
8 - x2
BOTTOM BASE CENTRE RAIL
D04
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
C
C
D
D
D
D
6
8
8
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
HB
11 - x2
TOP BUNK FIXED SLATS
12 - x21
BOTTOM BUNK SLATS
13 - x2
BOTTOM BUNK FIXED SLATS
H02
10
11
11
12
13
13
B
B
B
B
B

STEP 7
STEP 8
SEC/SH/10/22/RJ1
Page 07
14 - x1
FRONT SAFETY RAIL
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
F08
E08
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
14
B
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
16
E
E
E
E
F
F
F
F
B
B
B
B
E
E
E
E
F
F
F
F
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
16 - x1
BOTTOM FRONT SIDERAIL
17 - x2
LADDER SIDE
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
C08
F08
18 - x4
LADDER STEPS
C
C
C
C
C
C
C
C
F
F
F
F
F
F
F
F
17
17
18
18
18
18

STEP 9
STEP 10
SEC/SH/10/22/RJ1
Page 08
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
G04
I04
M6x15mm
M6x20mm
M6x40mm
M6x45mm
M6x50mm
M6x70mm
PARTS REQUIRED
HARDWARE REQUIRED
TOOLS REQUIRED
NOW FULLY TIGHTEN ALL BOLTS !!
G
H
G
G
G
G
TOP BUNK
MAX WEIGHT
100KG
BOTTOM BUNK
MAX WEIGHT
180KG

Page 09
SEC/SH/10/22/RJ2