Seconique 55049 User manual

55049
Page 01
DO NOT
USE
!
ASSEMBLY INSTRUCTIONS
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CORONA BUDGET DINING TABLE
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
CARE AND MAINTENANCE
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
FOR DOMESTIC USE ONLY
SEC/SH/11/21/PJ1

03
03
05
5
4
04
1
02
03
4
5
to help identify them during assembly.
Please Note:
The below parts have been number/colour coded
to help identify them during assembly.
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S400-401-152-PJ1-01T Table Top 11/1
Table Leg (Red Marking)
Short Frame Side
2
2
2
1/1
1/1
1/1
S400-401-152-PJ1-02T
S400-401-152-PJ1-03T
S400-401-152-PJ1-04T
PARTS LIST
A01 C
D
04
01
B10
HARDWARE LIST
Ø4,0 x 35CP
7,0 x 80mm (Black)
1/+
1/+
TOOLS REQUIRED
GLUE
5Long Frame Side 21/1
S400-401-152-PJ1-05T
2
3
Table Leg
SEC/SH/11/21/PJ1
Page 02
2
3
E04
7,0 x 60mm (Black)
1/+

C
D
Detail 2
GLUE
GLUE
C
D
Detail 2
HARDWARE REQUIRED
A01
TOOLS REQUIRED
HARDWARE REQUIRED
2 - x1
TABLE LEG (RED)
STEP 1
PARTS REQUIRED
C02
D01
7,0 x 80mm
A01
TOOLS REQUIRED
C02
D01
7,0 x 80mm
STEP 2
A
GLUE
Detail 1
3 - x1
TABLE LEG
5 - x1
LONG FRAME SIDE
2 - x1
TABLE LEG (RED)
PARTS REQUIRED
3 - x1
TABLE LEG
5 - x1
LONG FRAME SIDE
A
GLUE
Detail 1
(Blue Marking)
Detail 1
Detail 2
(Red Marking)
5
2
5
3
(Blue Marking)
Detail 1
Detail 2
(Red Marking)
3
2
SEC/SH/11/21/PJ1
Page 03
Ø7,0x60mm
Ø7,0x80mm
Ø7,0x60mm
Ø7,0x80mm

B
Detail 3
E
D
Detail 2
A
GLUE
Detail 1
PARTS REQUIRED
1 - TABLE TOP x1
HARDWARE REQUIRED
PARTS REQUIRED
4 - x2
SHORT FRAME SIDE
A01
E04
D01
7,0 x 60mm
HARDWARE REQUIRED
B10
Ø4,0 x 35CP
STEP 3
STEP 4
TOOLS REQUIRED
TOOLS REQUIRED
x2
GLUE
(Red Marking)
Detail 2
Detail 1
(Red Marking)
4
4
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
XXXXXXX
CENTRALIZE
Detail 3
1
SEC/SH/11/21/PJ1
Page 04
Ø7,0x60mm
Ø7,0x80mm

55182
SEC/SH/11/21/PJ1
DO NOT
USE
!
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
CORONA BUDGET DINING CHAIR
FOR DOMESTIC USE ONLY
PAGE 01
ASSEMBLY INSTRUCTIONS

4
4
5
1
2
6
6
5
7
7
8
8
3
6
7
8
Front Leg
Side Seat Rail
Stretcher
S400-402-152-PJ1-06C
S400-402-152-PJ1-07C
S400-402-152-PJ1-08C
2
2
2
1/1
1/1
1/1
F08
1/+
Ø7,0x70mm (Black)
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
5
S400-401-152-PJ1-01C Right Chair Side 11/1
Le Chair Side
Seat Pad
Back Rail
Seat Rail
S400-401-152-PJ1-02C
S400-402-152-PJ1-03C
S400-402-152-PJ1-04C
S400-402-152-PJ1-05C
1
1
2
2
1/1
1/1
1/1
1/1
A01 D
E
08
01
B04
HARDWARE LIST
Ø4,0 x 35mm
PARTS LIST (PER CHAIR)
C04
8,0 x 30mm
1/+
2/+
1/+
Ø7,0x60mm (Black)
TOOLS REQUIRED
GLUE
PAGE 02
SEC/SH/11/21/PJ1

A
GLUE
Detail 1
7
7
8
8
2
1
6
6
Detail 1
7 - x2
SIDE SEAT RAIL
8 - x2
STRETCHER
4
4
Detail 3
A
B
GLUE
Detail 3
F
Detail 2
Detail 2
GLUE
GLUE
HARDWARE REQUIRED
PARTS REQUIRED
A01
4 - x2
BACK RAIL
TOOLS REQUIRED
STEP 2
A01
HARDWARE REQUIRED
1 - x1
RIGHT CHAIR SIDE
2 - x1
LEFT CHAIR SIDE
STEP 1
PARTS REQUIRED
F08
B04
Ø8x30mm
6 - x2
FRONT LEG
Ø7,0x70mm
TOOLS REQUIREDTOOLS REQUIRED
PAGE 03
Ø7,0x60mm
Ø7,0x70mm
SEC/SH/11/21/PJ1
B
B
B
B

Detail 4
HARDWARE REQUIRED
STEP 4
Detail 4
D
PARTS REQUIRED
D04
Ø7,0x60mm
GLUE
A01
TOOLS REQUIRED
Detail 3
A
B
GLUE
Detail 3
PAGE 04
Ø7,0x60mm
Ø7,0x70mm
SEC/SH/11/21/PJ1
HARDWARE REQUIRED
PARTS REQUIRED
A01
4 - x2
BACK RAIL
TOOLS REQUIRED
STEP 3
Detail 4
Ø7,0x60mm
Ø7,0x70mm
GLUE
4
4
5
5
Detail 3
D
Detail 4
A
B
GLUE
Detail 3
5 - x2
SEAT RAIL
D04
Ø7,0x60mm

HARDWARE REQUIRED
STEP 6
PARTS REQUIRED
TOOLS REQUIRED
PAGE 05
SEC/SH/11/21/PJ1
HARDWARE REQUIRED
PARTS REQUIRED
C04
3 - x1
SEAT PAD
STEP 5
Ø4,0 x 35CP
TOOLS REQUIRED
Detail 5
C
CENTRALIZE
xxxxx
3
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
Detail 5