Seconique Richmond Foldaway Dining Table User manual

RICHMOND FOLDAWAY DINING TABLE
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE
GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT. ITS USE WILL
INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE NECESSARY TO TIGHTEN
UP THE FIXINGS FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO NOT USE POLISH, DETERGENT
OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A PLACE MAT UNDER HOT OR
MARKING.
COLD ITEMS TO PREVENT
FOR DOMESTIC USE ONLY
PAGE 1 OF 2
DO NOT
USE
SEC/SH/08/18/PU1

PAGE 2 OF 2
PLEASE CHECK THAT YOU HAVE ALL THE PARTS
LISTED BEFORE YOU START ASSEMBLING. IF YOU
DO FIND THAT SOMETHING IS MISSING, DO NOT
CONTINUE ASSEMBLY. PLEASE CONTACT YOUR
SUPPLIER IMMEDIATELY.
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST
PART
1
2
3
4
A
B
C
D
E
QTY
1PCS
2PCS
2PCS
1PC
QTY
6PCS
6PCS
12PCS
12PCS
1PC
DESCRIPTION DESCRIPTIONPART
TABLE TOP
TABLE LEG
FRAME SUPPORT
FRAME SUPPORT WITH HOLE
JCBC SCREW M6 X 50MM (RB)
JCBC SCREW M6 X 60MM (RB)
SPRING WASHER M6 x 13.5MM (RB)
FLAT WASHER M6 X 13.5MM (RB)
ALLEN KEY M4 X 30 X 115MM BALL SHAPE(BLK)
HARDWARE LIST
STEP 1
STEP 2
Attach the Frame Support (3 & 4) to the Table Leg (2)
using JCBC screw (B), Spring Washer (C) & Flat Washer (D).
Fully tighten up using Allen Key (E).
Attach the Table Top (1) to the Table Leg (2) and Frame
Support (4) using JCBC screw (A), Spring Washer (C) &
Flat Washer (D).
Fully tighten up using Allen Key (E).
1
33
33
22
22
2
2
3
4 (At Bottom)
BE
E
C
D
D
2
2
3
3
Hole
4
C
A
1
2
2
3
3
4
Function 1
Function 2
RICHMOND FOLDAWAY DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SH/08/18/PU1

RICHMOND STOOL
ASSEMBLY INSTRUCTIONS
DO NOT
USE
SEC/SH/03/19/PU1
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE
GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT. ITS USE WILL
INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE NECESSARY TO TIGHTEN
UP THE FIXINGS FROM TIME TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO NOT USE POLISH, DETERGENT
OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A PLACE MAT UNDER HOT OR
COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
PAGE 1 OF 2

RICHMOND STOOL
ASSEMBLY INSTRUCTIONS
*NOTE : PLEASE ASSEMBLE ON SMOOTH SURFACE
HARDWARE LIST (FOR 1PC STOOL)PARTS LIST(FOR 1PC STOOL)
A
B
C
D
E
1
2
3
8PCS
8PCS
8PCS
2PCS
1PC
1PC
2PCS
2PCS
ALLEN KEY M4 X 65MM
JCBC WOOD M7 X 70MM (RB)
SIDE FRAME
CHAIR SEAT
SIDE STRETCHER FLAT WASHER M6 X 13MM (RB)
CSK SCREW
SPRING WASHER M6 X 13MM (RB)
NO.NO. DESCRIPTION
DESCRIPTION QTYQTY
Place the Chair Seat (1) on a flat & soft surface to prevent
scratches.
Attach the Side Frame (2) to the Chair Seat (1) and
Stretcher (3) using screw (A), spring washer (B) and flat
washer (C).
Tighten up by Allen Key(E).
Attach the Side Frame (2) to the Chair Seat (1) using screw
(D). Use a Phillips Screwdriver (not provided) to drive screw
(D).
Then, attach another Side Frame (2) to the Chair Seat
(1) and Stretcher (3) using screw (A), spring washer
(B) and flat washer (C).
Fully tighten up by Allen Key(E).
Page 2 of 2
1
22
22
33
33
Step 1
Step 3
Step 2
2
2
3
3
1
1
222
222
222
A
E
BC
THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE ANY CLAIM AND MAY DAMAGE THIS
PRODUCT MAKING IT UNSAFE.
E
A
B
C
333
33
33
3
3
333
Assembly
SEC/SH/03/19/PU1
222
1
DPhillips
Screwdriver
D