BDI CORRIDOR User manual

1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a
BINK table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor®furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor®furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
[email protected]. For all other concerns, please contact
your BDI retailer.
bdiusa.com
customerservic[email protected]om
CORRIDOR®5620
COMPACT BAR
A Phillips Screwdriver x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 03.14.2016 V4
B Hex Wrench x 1
D - Cabinet x 1
H Door Pull x 2
C Leveler Wrench x 1
E Metal Leg, Right x 1
F Metal Leg, Left x 1
K Glass Top x 1
J Rubber Bumper x 1
I M4 x 25 mm Screw x 4
L M6 Screw (Silver)
x 4
G 1/4-20 x 15 mm Screw
x 12

bdiusa.com
customerservic[email protected]om
CORRIDOR 5620
COMPACT BAR
2
Step 2 - With the Cabinet D on its back, slightly loosen screw attaching metal rail to Cabinet D using Hex
Wrench B. Slide tab of Metal Legs E,F into metal rail and attach to cabinet by using Screw G and Hex
Wrench B until fully tightened.
Step 3 - Using Screw G, attach Metal Legs E,F to Cabinet D with Hex Wrench B.Do not overtighten.
G x 8 D
G
G
G
F
E
D
G x 4
G
E

bdiusa.com
customerservic[email protected]om
CORRIDOR 5620
COMPACT BAR
3
Step 4 - With help from another person, carefully position Cabinet upright and install Door Pulls H using
Screw I and Phillips Screwdriver A. Adhere Rubber Bumper J to center of the top of Cabinet D .
Step 5 - Attach Glass Top K to Cabinet D using Screw (silver) L and Hex Wrench B. Do not overtighten.
J x 1
H x 2
I x 4
D
I
H
I
D
K
L
LL
L x 4
(Silver)

bdiusa.com
customerservic[email protected]om
CORRIDOR 5620
COMPACT BAR
4
Adjustable Shelf
The shelf pins located inside the right compartment may be repositioned using Screwdriver A, allowing you to
raise or lower the Adjustable Shelf to the desired level.
*Note: Once the unit is completely assembled and in its final position, adjust
the levelers using Leveler Wrench C as necessary. If you prefer to have
the doors remain in a fully-open position, partially extending the two (2) front
levelers is desirable. This action will orient the cabinet back slightly, preventing
the open doors from swinging towards their closed position.