SecuGen Hamster Pro 20 User manual
QUICK START GUIDE
Hamster Pro 20
Thank you for purchasing the Hamster
Pro 20 USB ngerprint reader, a versatile,
high quality scanning device that can be
used for a variety of security applications.
Install Driver
Before using your ngerprint reader, the
device driver must be installed.
Normally, the driver will be automatically
installed after plugging into a Windows
PC. If that does not happen, you may
manually download the driver from
www.secugen.com/download
Features
Accurate, distortion-free
ngerprint scanning
High quality, durable &
rugged sensor
Patented optical system
Ergonomic & user-
friendly design
Ability to work with dry,
moist & dicult-to-scan
ngers
Need a device driver? Go to www.secugen.com/download
This reader should be plugged into a USB 2.0 port.
Copyright © 2018. SecuGen Corporation. All rights reserved. (SG1-0007H-000)
How to Use
The quality of your ngerprints scanned with the USB reader will aect the
accuracy of matching them. For best results, please follow these suggestions.
Yes No
Yes No
Press evenly and keep your nger still.
Place the pad of your nger (not the tip) at the center of the sensor.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
For more information: www.secugen.com/support
