FingerTec AdapTec Plus Assembly instructions

Installer Guide

2
AdapTec Plus combines power supply and door access controller features
in a compact metal casing for an encrypted and secure I/O function, en-
hancing door access control functionalities and easing installation proc-
esses. The AdapTec Plus is an exceptional FingerTec accessory in a small
package!
UNDERSTANDING ADAPTEC PLUS FUNCTIONS
Enhanced Security with Encrypted Signals
It supports FingerTec encrypted 26-bit Wiegand communication output;
providing enhanced security level for extra protection.
Power Up Terminals & Door Lock Systems
A single AdapTec Plus can provide power simultaneously to a maximum 2
units of FingerTec terminals and 2 sets of door lock accessories such as EM
Lock and drop bolt in one single system installation.
Prolonged Life Span of Hardware
With data encryption, the life span of the terminals could be prolonged
without the risk of short circuiting when using AdapTec Plus.
Control IN/OUT Terminals At An Entrance
AdapTec Plus is a perfect choice for an IN/OUT installation, where a door
is controlled both, at the entrance and the exit.
Support Rechargeable Backup Battery
Connects well to any 12V rechargeable backup battery, providing power
to ensure protection of access during any events of power failure.
Adaptability to Enhanced Security

3
Emergency Alerts with Siren
Compatible with an NC siren type with a maximum of 0.5A load for emer-
gency event e.g if the terminal is being illegally dismantled.
Seamless Integration with FingerTec Terminals
Mix and match the FingerTec terminals via AdapTec Plus for a cost effec-
tive access control system suitable for small and medium sized offices.
Choose a DIY Metal Casing for Cleaner Installation
Store an AdapTec Plus and a backup battery in an exclusive FingerTec DIY
metal casing, providing a cleaner installation.
SPECIFICATIONS
MODEL AdapTec Plus
PRODUCT DIMENSION (L X W X H), mm 198 x 45 X 131
WEIGHT 1.1 kg
CPU 8 MHz 16-bit microprocessor
POWER INPUT AC 110 ~ 240V (universal input)
POWER OUTPUT DC12V 3A - Supports up to:
• 2 x FingerTec access control terminals
• 2 x electrical energized locks
BACKUP POWER SYSTEM UPS or DC 12V rechargeable backup battery
INPUT SIGNAL FingerTec encrypted Wiegand signal
OUTPUT SIGNAL 2 x FORM C Relay
• 1 x 0.5A siren (max)
• 1 x DC12V 3A EM output (max)
DOOR LOCK • Electromagnetic locks
• Door strike
• Drop bolt/Dead bolt
OPERATING TEMPERATURE 0°C to 55°C
HUMIDITY 10% to 90% RH (non-condensing)

4
1 2 3
12
32
1
UNDERSTANDING THE DESIGN
AdapTec Plus consists of 2 main modules and a timer:
1Power supply/power input module
2Access control/power output module
3Door lock timer
Power supply/power input module
1This portion is to be connected to power source with AC110~240V. AC current will
be supplied into this side and a DC 12V 3A current will be generated as output.
2These two cables, -V and +V are default and are connected to the inner part of
AdapTec. Please do not remove or change these cables.
Access control/power output module
1These cables connect to a DC12V rechargeable backup battery. During a power failure,
the battery will power up the AdapTec Plus.

5
This is a Door Lock Timer
Lengthen timing
Shorten timing
2These are the power outputs from AdapTec. Refer to the wiring diagrams in page 3, for
details.
3Power LED – a lit LED indicates power supply/power input module is working.
EM lock LED– a lit LED indicates that the AdapTec Plus is working to power up door
lock system.
Contact your local reseller or [email protected] in case either LED is not lit up.
Door lock timer
Users can adjust the timing for the EM Lock and Drop Bolt to close after opening using
the door lock timer. Turn the timer using a screwdriver; turning clockwise will lengthen
the time, turning anti-clockwise will shorten the time.
Note: AdapTec Plus can be connected to other devices which have the same power con-
sumption. Please consult FingerTec’s advice through [email protected] before using
AdapTec with other FingerTec models.

6
L N E -V
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
R B G
RRed
BBlue
GGreen
DC 12V
Rechargeable
Backup
Battery
AdapTec Plus
Access Control/Power Output Module
To Battery Tamper Siren EM Output Siren Door Wiegand
Switch Output 12V Voltage Accept Exit Input
- + Input 12V 0V GND WD0 WD1
Connection
Points
GND
PWR
WIRING DIAGRAMS
AC900
FUNCTION • Time Attendance Only
STEP 1 • Connection Points
STEP 2 • Connect AdapTec Plus to a Power Source
STEP 3 • Turn on the power to use FingerTec AC900 for time attendance
only.

7
L N E -V +V
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
R B G
RRed
BBlue
GGreen
AdapTec Plus
Access Control/Power Output Module
To Battery Tamper Siren EM Output Siren Door Wiegand
Switch Output 12V Voltage Accept Exit Input
- + Input 12V 0V GND WD0 WD1
Connection
Points
GND
PWR GND
WD0
WD1
DC 12V
Rechargeable
Backup
Battery
Connection
Points
Release
Button
EM +
Lock -
Emergency 2
Break
Glass (NC) 3
ON-OFF C
Key Switch
(NC) D
WIRING DIAGRAMS
AC900
FUNCTION • Access Control Only or Time Attendance
& Door Access
STEP 1 • Connection Points
STEP 2 • Connect AdapTec Plus to a Power Source
STEP 3 • Turn on the power to use FingerTec AC900 for door access con-
trol only or for time attendance and door access control simultaneously

8
RRed
BBlue
GGreen
L N E -V +V
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
R B G
DC 12V
Rechargeable
Backup
Battery
AdapTec Plus
Access Control/Power Output Module
To Battery Tamper Siren EM Output Siren Door Wiegand
Switch Output 12V Voltage Accept Exit Input
- + Input 12V 0V GND WD0 WD1
Connection
Points
GND
+12V
WIRING DIAGRAMS
R2, i-Kiosk100, i-Kiosk100 Plus, Q2i, Kadex
and m-Kadex
FUNCTION • Time Attendance Only
STEP 1 • Connection Points
STEP 2 • Connect AdapTec Plus to a Power Source
STEP 3 • Now you can turn on the power to use the system for time at-
tendance only.

9
RRed
BBlue
GGreen
L N E -V +V
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
R B G
AdapTec Plus
Access Control/Power Output Module
To Battery Tamper Siren EM Output Siren Door Wiegand
Switch Output 12V Voltage Accept Exit Input
- + Input 12V 0V GND WD0 WD1
Connection
Points
GND
+12V GND
WD0
WD1
DC 12V
Rechargeable
Backup
Battery
Connection
Points
Release
Button
EM +
Lock -
Emergency 2
Break
Glass (NC) 3
ON-OFF C
Key Switch
(NC) D
WIRING DIAGRAMS
R2, i-Kiosk100, i-Kiosk100 Plus, Q2i, Kadex
and m-Kadex
FUNCTION • Access Control Only or Time Attendance
& Door Access
STEP 1 • Connection Points
STEP 2 • Connect AdapTec Plus to a Power Source
STEP 3 • Turn on the power to use the model for door access control
only or for time attendance and door access control simultaneously.

10
L N E -V +V
Power Supply/Power Input Module
AC110~240V
L - Live
N - Neutral
E - Earth
R B G
RRed
BBlue
GGreen
DC 12V
Rechargeable
Backup
Battery
AdapTec Plus
Access Control/Power Output Module
To Battery Tamper Siren EM Output Siren Door Wiegand
Switch Output 12V Voltage Accept Exit Input
- + Input 12V 0V GND WD0 WD1
Connection
Points
GND
+12V
WIRING DIAGRAMS
Face ID 2
FUNCTION • Time Attendance Only
STEP 1 • Connection points
STEP 2 • Connect AdapTec Plus to a power source
STEP 3 • Turn on the power to use FingerTec Face ID 2 for time attend-
ance.