Secure E7+ User guide

+
Know your E7
1
Wi-Fi adapter
Select
Display
Menu
Minus Plus
Boost
Power
GMT/BST
GMT Only
Use -/+ for navigation
The buttons explained
2
• To navigate between dierent menus/menu items in the
forward direction
• To decrease the date, time and year
• To navigate between dierent menus/menu items in the
backward direction
• To enter a setting/option
• To confirm a selection
To On/O the device
• To return back to previous menu from within a submenu/selection
To set Boost manually
Function(s)
Plus (+)
Menu
Home screens
3
12:50 PM
Boost
Mon
O- Peak
Mon
12:50 PM
Mon
12:50 PM
Mon
Heating o
Boost enabled,
but no active
schedule
Timed boost enabled,
and boost schedule
active
O-peak schedule
running
X
Wi-Fi module is plugged in, but not connected to the network
A screen with no symbol shows that the Wi-Fi module is not plugged in
Menus
4Setting o peak / Boost schedule 5
Mon
O- Peak
Mon
Select day
Mon
Mon
Select period
Period 1
Mon
Set state
ON 9:00 PM
Mon
Set Hour
ON 9:00 PM
Mon
Set Minute
ON 9:00 PM
Mon
Copy Schedule
Mon
Save Schedule
Mon
Save Schedule
Yes
Mon
Save Schedule
No
Mon
Select day
Tue
Mon
Select period
Period 2
Mon
Set state
OFF 9:00 PM
Mon
Set Hour
ON 10:00 PM
Mon
Set Minute
ON 9:15 PM
Mon
Select period
Period 6
Mon
Select day
Sun
Repeat above steps for each period
Repeat above steps for each day
Mon
Boost
Mon
Select Day
Mo
Mon
Select Day
Mo Tu
6 Activating manual boost
x 1 - 30 mins
x 3 - 2 hours
x 2 - 1 hour
x 4 - Cancel
Note: This works only when no other scheduled operation is active. It also
overrides the running manual boost.
7 LED indications
Mains supply is o Mains supply is ON but
+
E7 device is o
+
E7 device is ON Manual or Timed Boost is
running
8General settings
Note: Boost schedule runs only if Timed boost is selected. To activate timed boost, press on the home screen.
Note: represents Select button through out the manual
Mon
Set time format
Mon
Set Time
Mon
Set Hour
12:50 PM
Setting time format and clock
9
Mon
Set time format
12 Hour
Mon
Set time format
24 Hour
Mon
Set date
Mon
Set Year
2022-03-31
• To increase the date, time and year
Mon
Set Month
2022-03-31
Mon
Set Day
2022-03-31
Mon
Set Hour
Mon
Set Minute
12:50 PM
Mon
Set Minute
12:51 PM
Menu
Selecting day light switching option
10
12:50 PM
Mon
GMT/BST
12:50 PM
Mon
GMT/BST
Enable
12:50 PM
Mon
GMT/BST
Disable
GMT ONLY- Switching will always take place at GMT times (summer and winter). The clock display
will tell the correct time of day.
GMT/BST -Switching time will be changed by one hour. In the GMT/BST mode the clock display will
match the actual switching time.
Default schedule (Monday to Sunday)
Resetting the device
11
E7 is connected to the Wi-Fi network, but the signal strength is weak
+
• To enter the main menu
Select
Minus (-)
Power
Boost
• To enable/disable timed boost , when on home screen
Mon
Device Info
Clock
Mon
Factory Reset
Mon
12:50 PM
Mon
GMT/BST
9
go to
10
go to
11
go to
12:50 PM
12:50 PM
Factory Reset
Mon
Factory Reset
Mon
NO
Factory Reset
Mon
YES
12:50 PM 12:50 PM 12:50 PM
E7 isconnected to the Wi-Fi network, and the signal strength is excellent
+
Button
O- Peak
Mon
12:50 PM
Boost
Mon
Settings
Mon
Mon
Exit
5
5
8
go to
go to
go to
E7 is connected to the Wi-Fi network, but the signal strength is poor
+
• To enable bluetooth pairing mode
01:50 PM
Quick operations guide
BGX701-360-R01
+
E7
All the screens are for illustration only.

Downloading the mobile app
12
1. Open app and create an account to sign-in
2. Perform steps as guided by the mobile app
Download Secure Controls mobile app
11 and above
6 and above
Or
Pairing options
13
or
Bluetooth
Adding device(s)
14
Alarm notification of persisting event
17
E0001234
On O
O-Peak O
Boost O
Refresh
Last synced 11:18 AM
Consumption Trends
Connecting locally (without Wi-Fi module)
ASwitching from Bluetooth to Wi-Fi C
?
Wi-Fi Settings
x
You are currently connected to
Airtel-MyWiFi-AMF-311WW-E0E3
Ensure that your mobile phone is connected to the Wi-Fi
network on which you want to configure the device.
Enter Wi-Fi password
Continue
(Locally)
(Remotely)
user2 xxxxx
Inviting users over Wi-Fi
15
Notes: Once you have connected your system to Wi-Fi you can now invite other users
Working with the mobile app
Secure controls
Back Add devices
System with device DEMOW07 is configured
Other users are also using the system. Do you want
to retain the users?
No Yes, retain
Remove existing
users?
If you confirm, exisiting
users will not be able to
access this system.
Cancel Confirm
Secure controls
Secure Control device
E7+ device
Press for
7 to 8 seconds
Secure controls
User1
Edit profile
Manage users
My systems
About
Help and support
Logout
App version 2.0.1.3
Secure controls
Back Add devices
Device DEMOFW07 will be added. Device RSSI is -56
Continue
Secure controls
Back Add devices
Device DEMOFW07 will be added. Device RSSI is -56
Continue
or
12:50 PM
Mon
12:50 PM
Mon
-
+
Why is my E7 not visible
on my app dashboard
(when connected on
Bluetooth)?
ŸIf you use another phone than the one you registered
with, you will also need to choose add new system
and re-scan.
ŸIf you log out of the app then you will need to re-scan
+
your E7 from the app left menu and select add new
system. Select yes when asked about retaining
existing users.
I am receiving the
message "Cannot
establish communication
with the device. Try
again.” What is the
reason? ŸIf two users are connected to the same device using
Bluetooth, and User 1 tries to connect remotely over
Wi-Fi and removes other users, then the other user will
not be able to communicate. User 1 will have become
the owner and now need to send an invite via email
from the app to the other users. Alternatively, other
user can re-scan and add the device over Bluetooth.
+
ŸIf an E7 device is connected to your phone on
Bluetooth and another user tries to communicate with
the same device at the same time on Bluetooth this
message can happen. I cannot scan the QR
code for adding a new
device.
Try entering the details manually using the mobile app.
You can get the details from device info under general
settings (refer section 8).
Query Probable reason(s)
Accepting invitation
16
Frequently asked questions
18
You are invited by User1
to join the E0001234 Secure
Controls as a User.
You are now able to access
E0001234 as a User
or
Note: To accept the invitation, the user must have already downloaded the app.
For Android
Note: If you were previously using the app via Bluetooth only, and want to switch to Wi-Fi, you will need to add the device again (refer section 14).
A
B
or
Connecting remotely (with Wi-Fi module)
B
Note: The mobile should be already connected to the Wi-Fi or else, the app will
continue to interact with the device on Bluetooth.
Note: To switch to Wi-fi , insert Wi-Fi module and refer section C.
mobile app (when
connected on
Bluetooth)?
Why my device’s status
is not updated on the
If the device’s status/configuration is changed (like
boost/o-peak) after one minute of inactivity on the app,
the same is not automatically reflected. You need to
refresh the app to view the latest updates.
Note: Once you have connected your system to Wi-Fi you can now invite other users
BGX7 0 1 - 3 6 0
Secure Meters (UK) Ltd
Chandlers Ford, Eastleigh,
SO53 3TL, England
Secure House, Lulworth Close,
www.securemeters.com
User1
user2 xxxxx
E0001234
On O
O-Peak O
Boost O
Refresh
Last synced 11:18 AM
Consumption Trends
Enter Wi-Fi password
Device is successfully
connected to Secure
Controls Wi-Fi
Invite new user
Manage users
Add new system
Sign in
Create account
Forgot password?
Forgot password?
Sign in
Create account
Device is successfully
connected to Secure
Controls Wi-Fi