SECURECOM DOOR MASTER 3 User manual

DOOR MASTER 3 1 EN N
D
DO OO OR R M MA AS ST TE ER R 3 3
Internet-based WIFI remote control
Users manual v2.0

DOOR MASTER 3 2 EN N
1. Contents
1. Contents .......................................................................................................................... 2
1General information ........................................................................................................ 3
1.1 Benefits .....................................................................................................................3
1.2 Operation ..................................................................................................................3
2Appearance and connection diagram .............................................................................. 4
3Settings............................................................................................................................ 5
3.1 Setting up the WIFI connection of the DM3 remote control unit.............................5
3.2 Setup and operation of the mobile application .........................................................7
4Advanced settings.......................................................................................................... 10
5Status indication ............................................................................................................ 11
6Technical data................................................................................................................ 11
7Content of the package.................................................................................................. 11

DOOR MASTER 3 3 EN N
1General information
DOOR MASTER 3 is an advanced gate opener, operating with WIFI connection over
the Internet, providing the following functions:
Control of the gate control unit from unlimited distance
using a smartphone application to open and close
Signalling the status information to the smartphone application
With “push notification” messages (e.g. OPEN, CLOSE)
Monitoring the opening and closing process, from the gate motor control,
synchronized with the original remote control of the gate
The DM3 remote control communicates through the Internet, therefore for its operation
it is necessary to have continuous Internet connection active both on the device and the
smartphone running the application.
The connection and communication is encrypted with the AES-128 encoding.
1.1 Benefits
No SIM card and no monthly fee
Unlimited distance, number of users and number of signals
Simple, fast setup (no router settings)
Control and status monitoring in one
1.2 Operation
Controlling the unit with the PULOWARE mobile phone application, DM3 relay will output
a closing contact for 1 second, then returns to normally open position. This contact can
control the external switching input of any gate controller. Position of the gate can be
monitored in 2 ways: monitoring either the wires of the motor, or the position of the limit
switch. MOTOR+ and MOTOR- inputs monitor the direction of movement of the gate
(opening or closing), and how long it takes (for example, stuck during closing). From this the
open or closed position of the gate, can be precisely determined. In case the controller is
not suitable for monitoring motor control (e.g. The motor is a 230VAC one), the LIMIT
SWITCH inputs of the unit, receive the signal of the external limit switch.
Upon opening or closing the gate controller informs its users, thus making the position of
the garage door visible, and the person opening or closing the gate.

DOOR MASTER 3 4 EN N
2Appearance and connection diagram

DOOR MASTER 3 5 EN N
3Settings
The settings required for operation, must be set on both the DM3 remote controller and
the smartphone side. Since continuous Internet connection is required, first the local WIFI
network name and password, have to be entered to the DM3 unit. Then the PULOWARE
mobile application shall be downloaded to the phone of the user, where subsequent
settings can be made.
3.1 Setting up the WIFI connection of the DM3 remote control unit
For settings the own webpage of the DM3 has to be accessed, which is performed by
momentarily pressing the WIFI SETUP button. Then the alternate blinking of green and red
light denotes “HOTSPOT” mode, when an own WIFI network is emitted by the name
SECURECOM DEVICE, in order to set up Internet connection. You have to connect to this
network by a WIFI capable phone or computer, then the webpage containing the settings,
can be accessed using a web browser. (It is important to keep the mobile net connection of
the phone switched off!)
Accessing the webpage of the unit, and settings of the connection
a. Press the WIFI SETUP button momentarily, so that the status indicator blinks
alternately green and red.
b. Among WIFI networks, find SECURECOM DEVICE and connect to it.
IMPORTANT: for the time of setup, turn off mobile Internet access on your phone,
otherwise the operating system will connect the browser towards mobile Internet
service!

DOOR MASTER 3 6 EN N
c. After connecting successfully, enter the DM3 webpage with your browser, which is
accessible at wifisetup.eu, and provides for setting up the following:
On the webpage of the DM3 unit, 2 different WIFI router connections can be set up,
by entering the selected networks and their relevant passwords. WIFI networks are
backing up each other, meaning if connection to WIFI1 loses Internet connection, the
unit will switch to the WIFI2 network, and vica versa.
-Pressing the SCAN button will list the available networks, where the appropriate
network can be selected and the relevant password be entered.
-The connection can be tested by pressing the TEST button. If the
password is correct, the device is issued with an IP address. If there is no IP address,
either the password is incorrect, or Internet connection is lost in the meantime.
-Save the settings by pressing the SAVE button.
Then mobile Internet access can be, moreover should be switched back on, since mobile
Internet connection is required for the operation of the remote control!
d. On the DM3 unit, press the WIFI SETUP button again momentarily, so that it
switches back to “NORMAL” mode. If connection to the network router is successful,
green light is blinking. Further setting are made in the application.

DOOR MASTER 3 7 EN N
3.2 Setup and operation of the mobile application
The free PULOWARE mobile application can be downloaded to the device of the
user from the Google Play or Apple App Store, respectively. After starting the application,
the setup wizard asks for entering the operator (user) name, then the Device identifier
number of the DM3 unit to be controlled, and finally the relevant password. The device
identifier number is the 16 alphanumeric character code on the sticker on the bottom of
the device, which is the unique identifier of the unit in the system. There is no password for
a new device, this can be set in a separate account on the IoT server interface.
Starting the application and initial settings
a. Download the PULOWARE application from the store supported by your phone.
b. Start the application, and enter the relevant data
Enter user name Enter device identifier number
(only required when the app is installed) (when adding a new device)

DOOR MASTER 3 8 EN N
Details and usage of the application
Home screen
Setup screen
<- MENU icon and app NAME
<- Device list, which is scrollable horizontally,
thus further units can be selected here
<- Display of gate position
<- Opening or Closing time and triggered by
(operator name)
<- Control button
must be pressed for at least 2 seconds to
start control
<- Recycle bin icon for deleting the unit from the app
<- Device ID of the gate
<- Name of the gate
<- Modification of sort order in the device list of the
main screen
<- Monitoring gate position: from the opening
motor or from the limit switch
<- Sending information (push messages) on the
given event
<- Creating shortcut icon to immediately gate
controlling

DOOR MASTER 3 9 EN N
Opening process
Closing process

DOOR MASTER 3 10 EN N
4Advanced settings
Communication of the DM3 is IoT cloud based, thus it is possible to monitor and check the
unit on the server interface. Access is provided on the www.puloware.com page, but this
requires registration. After login the device identifier of the communicator has to be added
to the list, so that the given DM3 unit appears on the interface! After login, the following
interface can be seen:
DEVICES: The devices added to the account, are listed on the left side.
MODULE STATUS: Can be monitored during the operation of the unit, thus movement and
direction of the motor, and position of the limit switch, are visible. Settings, and their
modifications are synchronised with the mobile application.
Apart from the DM3 remote control, the server and the application provide data services
for other SECURECOM products, thus other types of units (e.g. alarm signaling) can be
added to the application. Further information is available on the www.securecom.eu site.
Reset to factory defaults: If necessary, all settings and existing connections, can be deleted
from the unit, with the user phone applications.
This operation can only be performed on the device, if it is in standstill and has stable
Internet connection, that is, green light is blinking.
For reset, press the WIFI SETUP button continuously for 30 seconds, then the status LED
blinks red/green to indicate deletion, then continuous red indicates all contacts and
settings were deleted.

DOOR MASTER 3 11 EN N
5Status indication
The STATUS indicator next to the antenna transmits the following information about the
actual operation of the DM3 unit.
Continuous red
Adjustment wrong or missing
Blinking red
Connecting to WIFI network
Blinking green
NORMAL operation, stable Internet connection
Alternating green/red
HOTSPOT mode, setup in progress
6Technical data
Max. current consumption
100mA
Operating frequency
2.4 GHz
WIFI protocol
IEEE 802.11 b/g/n
Receiver sensitivity
-98 dBm
Transmitter power
+20 dBm
Antenna connection
RP-SMA
Relay load capacity
max. 2A @ max. 60V
MOTOR voltage
max. 24VDC
Operating temperature
-40…+85°C
Dimensions
80x40x20mm
Ingress protection
IP40 (safety box required outside)
7Content of the package
•DM3 WIFI remote control
•Terminal stripe for wiring
•WIFI antenna 2.4GHz 3dB
•Limit switch (reed-relay + magnet + screws) with 3m of wire
•Users manual