Security Camera King TVIPTZ-TP2IR18XME User manual

1080p
Resolution
2yr
Warranty
Motion
Activated
Recording
PTZ
Control View From
Anywhere
IPPTZ User's Manual
TVIPTZ-TP2IR18XME

WARNINGS AND CAUTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS
THROUGH VENTILATION GRILLS OR OPENINGS ON THE EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
This symbol, is intended to alert the user the presence of non-insulated
“dangerous voltage” within the product’s enclosure that maybe of sufficient
magnitude to cause shock.
This symbol, is intended to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this product

PRECAUTIONS:
Anyone without technical qualifications should not attempt to operate this dome
device before reading this manual thoroughly.
Remove anypower to the dome before attempting any operations or adjustments
inside the dome cover to avoid potential damage to the mechanism.
Inside the dome cover there are precision optical and electrical devices. Heavy
pressure, shock and other sudden adjustments or operations should be avoided.
Otherwise, you may cause irreparable damage to the product.
Please DO NOT remove or disassemble any internal parts of the video camera to
avoid abnormal operation and voiding the warranty. There are no serviceable
parts inside this camera.
All electrical connections to the dome should be made in strict accordance with the
attached labels and wiring instructions in this manual. Failure to do so may
damage the dome beyond repair and void the warranty.
For outdoor installation, especially in high places or poles, it is highly recommended
that the proper lightning arrestors and surge suppressors are installed before the
dome is started.

IMPORTANT SAFEGUARDS
1. Read these instructions before attempting installation or operation of dome device
2. Keep these instructions for future reference
3.
Heed all warnings and adhere to electrical specifications
4. Cleanonly with nonabrasive dry cotton cloth, lint free and approved acrylic cleaners
5. Should the lens of the camera become dirty, use special lens cleaning cloth and solution to
properly clean it.
6. Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions
7. Use only attachments or accessories specified by the manufacturer
8. Verify that the surface you are planning to use for attaching the dome can adequately
support the weight of the device and mounting hardware
9.
Protect the device against lighting storms with proper power supplies
10.
Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way, when liquid traces are present, when the presence of loose
objects is evident or if the device does not function properly, or has received sever
impact.
11. Indoor dome is for indoor use only andnot suitable for outdoor or high humidity locations.
Do not use this product under circumstances exceeding specified temperature and
humidity ratings.
12.
Avoid pointing the camera directly to the sun or other extremely bright objects for
prolonged period of time to avoid the risk of permanent damages to the imaging sensor.
13.
The attached instructions are for use by qualified personnel only. To reduce the risks of
electric shock do not perform any servicing other than whats in the operating
instructions unless you are qualified to do so.
14. During usage, user should abide by all electrical safety standards andadhere to electrical
specifications for the operation of the dome. The control cable for RS485 communications
as well as the video signal cables should be isolated from high voltage equipment and or
high voltage cables.
15. Use supplied power supply transformer only.

INDEX
1 Product Introduction................................................................................................................... 5
1.1 Package Contents...............................................................................................................5
1.2 Specification.........................................................................................................................6
1.3 Function Description...........................................................................................................7
2 Installation..................................................................................................................................... 9
2.1 DIP Switch Settings............................................................................................................ 9
2.1.1 Preparation............................................................................................................... 9
2.1.2 Address Settings...................................................................................................... 9
2.1.3 Baud Rate Settings............................................................................................... 10
2.1.4 RS-485 Bus Matching Resistance...................................................................... 10
2.2 Bracket Dimensions..........................................................................................................11
2.2.1 Wall Mounted Bracket........................................................................................... 11
2.2.2 Corner Mounted Bracket...................................................................................... 11
2.2.3 Pole Mounted Bracket...........................................................................................11
2.2.4 Ceiling Mounted.....................................................................................................12
2.3 Installation of Brackets.....................................................................................................12
2.3.1 Wall Mounted......................................................................................................... 12
2.3.2 Corner Mounted.....................................................................................................13
2.3.3 Pole Mounted......................................................................................................... 14
2.3.4 Ceiling Mounted.....................................................................................................15
2.4 Connection.........................................................................................................................16
3. Function Instruction.................................................................................................................17
3.1 Power Up Action............................................................................................................... 17
3.2 Basic Function...................................................................................................................17
3.3 Special Function............................................................................................................... 18
3.4 Screen Character Operation...........................................................................................18
4OSD Menu.................................................................................................................................... 20
4.1 Menu Index........................................................................................................................ 20
4.2 System Information...........................................................................................................21
4.3 Dome.................................................................................................................................. 21
4.3.1 Communication...................................................................................................... 22
4.3.2 IR Display............................................................................................................... 22
4.3.3 Guard Tours............................................................................................................23
4.3.4 A-B Scan................................................................................................................. 23

4.3.5 Pan Scan................................................................................................................ 24
4.3.6 Park Action............................................................................................................. 24
4.3.7 Privacy Zone.......................................................................................................... 25
4.3.8 Alarm (Optional).....................................................................................................25
4.3.9 Advanced................................................................................................................ 26
4.4 Camera...............................................................................................................................26
4.5 Language........................................................................................................................... 27
4.6 Display................................................................................................................................27
4.7 Reset...................................................................................................................................27
5. Auto Temperature Control...................................................................................................... 28
Appendix ⅠAnti-lightning, Anti-surge..................................................................................28
Appendix ⅡClean Transparent Cover.................................................................................. 29
Appendix ⅢCommon Knowledge on RS-485 Bus............................................................ 29
1. Basic Feature of RS-485bus.............................................................................................29
2. Mode of Connection and Terminal Resistance.............................................................. 29
AppendixⅣAddress Code Mapping Table............................................................................30
Appendix ⅢException Handling............................................................................................ 32
Copyright Statement.................................................................................................................... 32
* Indicates the functions with default protocol, it might not function by using other protocols
※Indicates the optional functions, only with certain mode.
1 Product Introduction
1.1 Package Contents
IR Speed dome 1pc
Wall mount bracket 1pc
Power supply 1pc
Screws kits 1pc
User manual 1pc

1.2 Specification
Model#: TVIPTZ-TP2IR18XE
Camera
Image Sensor 1/2.8” SONY CMOS Sensor 2.4MP
Image Resolution 1080P
S/N Ratio ≥58dB
PTZ
Horizontal Rotation Speed 60°/s
Horizontal Rotation Range 360°
Tilt Rotation Speed 360°
Tilt Rotation Range 93°
Auto Flip Horizontal 180°, Vertical 93°
Ratio Speed Support
360° Scan User programmable
360° Scan Speed 01-64speed setting available
A-B Scan User programmable
A-B Scan Speed 01-64speed setting available
PWR on Action Memory/Tour/360 scan/AB scan/Home/Nop
Park Time 1-60 mins setting available
Dwell Preset 1-60s interval available
Preset Points 220
Go to Preset Speed 200°/s
Guard Tours 4 groups
Guard Points Max.16 points, dwell time user selectable
Lens
Focus Length 5.35mm-96.3mm
Focus Control 18X Optical Zoom
Night Vision
Infrared LED 22x8PCS + 16x6PCS
IR Range 390 Feet (120m)
Auxiliary Interface
Communication Protocol Pelco-D, Pelco-P
Communication RS485
Baud Rate 1200/2400/4800/9600bps
General
Weatherproof IP66
Operating Humidity ≤95% Non Condensing
Heater & Blower Auto temperature control
Auto Control IR LED PWM
OSD Menu Yes English
Power DC12V/3A
Power Consumption ≤36W
Lightning Protection Transient voltage 6000V
Dimension 32x32x43(cm)
Weight 7kgs
Operating Temperature Indoor: 32°~104°, Outdoor: -40°~140°
Model#: TVIPTZ-TP2IR18XME
Camera
Image Sensor 1/2.8” SONY CMOS Sensor 2.4MP
Image Resolution 1080P
S/N Ratio ≥58dB
PTZ
Horizontal Rotation Speed 45°/s
Horizontal Rotation Range 360°
Tilt Rotation Speed 30°/s
Tilt Rotation Range 93°
Auto Flip Horizontal 180°, Vertical 93°
Ratio Speed Support
360° Scan User programmable
360° Scan Speed 01-64speed setting available
A-B Scan User programmable
A-B Scan Speed 01-64speed setting availabl
PWR on Action Memory/Tour/360 scan/AB scan/Home/Nop
Park Time 1-60 mins setting available
Dwell Preset 1-60s interval available
Preset Points 220
Go to Preset Speed 200°/s
Guard Tours 3 groups
Guard Points Max.16 points, dwell time user selectable
Lens
Focus Length 5.35mm-96.3mm
Focus Control 18X Optical Zoom
Night Vision
Infrared LED 42x6PCS
IR Range 195 Feet (60m)
Auxiliary Interface
Communication Protocol Pelco-D, Pelco-P
Communication RS485
Baud Rate 1200/2400/4800/9600bps
General
Weatherproof IP66 Rated
Operating Temperature Indoor: 0°~ +40° Outdoor: -40°~ +60°
Operating Humidity ≤95% Non Condensing
Heater & Blower Auto temperature control
Auto Control IR LED PWM
OSD Menu Yes English
Power DC12V/3A
Power Consumption ≤36W
Lightning Protection Transient voltage 3000V
Dimension 29.5x28x17(cm)
Weight 2.5kgs
Operating Temperature Indoor: 32°F~104°F, Outdoor: -40°F~140°F

1.3 Function Description
Super Communication
Address, baud rate and protocol can be changed both from Dip switch or from software.
Multilanguage OSD Menu
The language display on screen menu, User can set the function or parameter, or check the
related information through the OSD.
Privacy Mask
Privacy masking is a feature found in many IP cameras which is used to protect personal privacy
by concealing parts of the image from view with a masked area.
Alarming Set
Details please refer to the OSD menu.
IR Detection Time
Time duration switching from Color to B/W or B/W to Color.It can be set through OSD Focus
The auto focus enables the camera to focus automatically to maintain clear image. User can use
manual focus to in special condition.
Under the following conditions camera will not auto focus on the camera target:
(1) Target is not in the center of the screen;
(2) When attempting to view images that are far and near at the same time;
(3) Target is strongly lighted object, such as neon lamp.
(4) Targets are behind glass covered with water droplets or dust.
(5) Targets are moving quickly.
(6) Monotonous large area targets, such as wall.
(7) Targets are too dark or faint.
BLC
If a bright backlight is present, the target in the picture may appear dark or as a silhouette, BLC
enhances the target in the center of the picture, the dome uses the center of the pictures to
adjust the iris. if there is a bright light source outside this area, it will wash out to white, the
camera will adjust the iris so that the target in the sensitive area will properly exposed.
Iris Control
Factory default is automatic camera aperture, in mode of which camera senses changes in
ambient light through moving and adjust automatically lens aperture to make the brightness of
output image stable.

Users can manually adjust the aperture size to get the required picture brightness
through pressing OPEN or CLOSE keys.
Auto-recognize to Protocol and Module
The dome can auto-recognize to the corresponding protocol and module during
self-inspection.
eg. Module: Sony, CNB, LG, Samsung, domestic etc.
Protocol: PELCO_P, PELCO_D etc.
Day/Night Switch
With auto day/night switch function, when the illumination is low the picture will auto switch
from day to night mode and when the illumination is high enough the picture will auto switch
from night to day mode
Ratio Speed
PTZ speed is will vary depending on the zoom factor. When zooming in, the speed will
become slower and when zooming out, the speed will become quicker.
A-B Scan
Dome circularly scans close-up real-time scene according to A-B points at setting speed
in both horizontal and vertical directions.
Pan Scan
Dome will 360°clockwise continuously scan the display scene at setting speed in
horizontal direction under the condition that pitch angle remains the same.
Preset
After the dome camera keeps arbitrary PTZ location, it will automatically move to the
defined position when preset is called.
Guard Tour Scan
Dome patrol scans according to certain edited preset order.
Power Off Memory
This feature allows the dome to resume its previous preset or status after powered off and
on.
Park Action
If unsed for a certain amount of time dome will automatically run preset specific mode

Zero Alignment
There is a point specified as zero point. When the dome is working, the preset point is not
accurate. User can make the dome automatically enable the zero alignment .
Auto Flip
In the manual tracking mode, when a target goes directly beneath the dome, the dome will
automatically rotate 180 degree in horizontal direction to maintain tracking. When the dome
flips, the camera starts moving upward as long as you hold the joystick in the down
position.
2Installation
2.1 DIP Switch Settings
2.1.1 Preparation
Before installation, make sure that the protocol , baud rate andaddress code used by the
product is fully consistentwith the control system. Corresponding DIP switch site can be
seenbelow:
2.1.2 Address Settings
DIP switch SW1 is the address settings of camera. It is a 8-bit switch, each switch
corresponds with 0 or 1 in the Binary code. OFF status means 0 while ON status means 1.
(See illustration above) Turn on the 1st and 3rd (allocated to ON position) and get the
binary code00000101, so the correspondence address is 5.
Detailed settings please refer to the back “Address Code Mapping Table”(appendix Ⅳ).