SecurityMan DigiLCDNDVRB User manual

DigiLCDNDVRB User’s Manual
INDOOR PAN /TILT DIGITAL WIRELESS
ISECURITY CAMERA SYSTEM

© Copyright 2014
This manual is furnished under license and may be used or copied only in
accordance with the terms of such license. Except as permitted by such license,
no part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or any means, electronic, mechanical, recording, or
otherwise, including translation to another language or format, without the
prior written permission of SecurityMan. The content of this manual is furnished
for informational use only, is subject to change without notice, and should not
be construed as a commitment by SecurityMan. SecurityMan Inc assumes no
responsibility or liability for any errors or inaccuracies that may appear in this book.
FCC Information
Notes on FCC’s “Consistent Statement of Information” This product meet the
requirements specified in Part 15 of FCC Regulation. Operation rests with the
following two conditions:
(1) The equipment should not cause any harmful interference.
(2) The equipment must receive and process any interference, including any
possible interference caused by operation mistakes.
After testing the product, we confirm that the camera complies with the provision
for class C digital equipment in the 15th part in FCC regulations; and the receiver
complies with the limitations for class B digital equipment in Part 15 of FCC
regulation. The product generates, applies and emits radio waves. It might cause
harmful interferences to wireless communication if not be installed and used
following the description of the manual.
The product may cause interference in residential area, and the customer should
take remedies to eliminate the interference on their own costs.
If the product causes any harmful interference to wireless equipment or disturbs the
receiving of TV signals (it can be identified by turning on and off the product), you
can solve the trouble by following methods:
• Readjust the product or put it in another place.
• Extend the distance between the equipment interfered and the product.
• Refer to dealers or experienced radio electrician for help.

Warranty
SecurityMan Inc warrants that this product will be free from defects in title,
materials and manufacturing workmanship for one year or otherwise specified
on the product packaging. This limited warranty shall commence from the date
of purchase. SecurityMan products warranty is not transferable and is limited
to the original purchaser. If the product is found to be defective then, as your
sole remedy and as the manufacturer’s only obligation, SecurityMan will repair
or replace the product. This warranty shall not apply to products that have been
subjected to abuse, misuse, abnormal electrical or environmental conditions,
normal wear and tear, or any condition other than what can be considered normal
use.
Warranty Disclaimers
SecurityMan Inc, makes no other warranties, express, implied or otherwise,
regarding this product, and specifically disclaims any warranty for merchantability
or fitness for a particular purpose. The exclusion of implied warranties is not
permitted in some states and the exclusions specified herein may not apply to you.
This warranty provides you with specific legal rights. There may be other rights
that you have which vary from state to state.
Limitation of Liability
The liability of SecurityMan Inc, arising from this warranty and sale shall be limited
to a refund of the purchase price. In no event shall SecurityMan be liable for costs
of procurement of substitute products or services, or for any lost profits, or for any
consequential, incidental, direct or indirect damages, however caused and on any
theory of liability, arising from this warranty and sale. These limitations shall apply
not withstanding any failure of essential purpose of any limited remedy.
For Tech Support Call: 888-977-3777
SecurityMan
4601 E. Airport Drive
Ontario, CA, 91761, USA
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.securitymaninc.com
Copyright 2014 by SecurityMan v1.0

Table of Contents
Introduction
Features
Important
Restrictions
Contents
Product Basics
Receiver (SM-871DR)
Camera (SM-821DT)
Quick Start
Hardware Setup / Installation
Receiver (SM-871DR)
Camera (SM-821DT)
Smartphone Remote Access
Android
iPhone
Basic Operations
Turning the DVR On/OFF
Locking / Un-Locking the DVR
Screen Calibration
Adding a Camera
Recording
Video
Manual Recording
Motion Detection Recording
Photo Snapshots
Enabling Photo Snapshots
Manual Snapshot
Motion Detection Snapshots
Setting the Time & Date
Volume Control
Pan / Tilt and Zoom
Pan / Tilt (SM-821DT only)
Zoom
Playback
Video
Photo (Snapshots)
DVR Menu Options
Settings
Camera
Camera Pairing
Brightness Control
Motion Detection
Network
IP Setting
Static IP
1
1
1
3
5
6
7
7
8
9
10
10
12
13
14
14
14
15
15
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
25
25
26
26
27
27
28
29
30
30
31

DHCP
Security Setting
Device & Admin Password
Changing your Device & Admin Passwords
Information
Alarm
Alarm Time
Alarm Volume
Email Alert
Setting Up Email Alerts
SMTP Server
SMTP Port
User Name
Password
SSL
Email To
System
Date Time
Recorder
SD Card
Format
Formatting Your SD Card
Overwrite
Enabling / Disabling Overwrite
Power Saving
Enabling / Disabling Power Saving
Screen Auto Lock
Enabling Screen Auto Lock
Upgrade
Upgrading Your Firmware
Reset
Applying Factory Default Settings
Language
Volume
Volume Adjustment
Playback
Playing Back Recorded Video
Playing Back Photos (Snapshots)
Loop
PTZ (Pan, Tilt, Zoom)
Pan / Tilt (SM-821DT only)
Zoom

1
Introduction
The SecurityMan DigiLCDNDVRB iSecurity camera system allows you
to monitor your home or business on your mobile device anytime from
anywhere in the world. The DigiLCDNDVRB utilizes the best digital
wireless technology with a wireless transmission range of up to 490ft,
a Pant Tilt camera and a portable 7” touch screen/LCD monitor which
allows you take your iSecurity with you anywhere on your property.
Important
The SecurityMan DigiLCDNDVRB iSecurity camera system allows you
to monitor your home or business on your mobile device anytime from
anywhere in the world. The DigiLCDNDVRB utilizes the best digital
wireless technology with a wireless transmission range of up to 490ft,
a Pant Tilt camera and a portable 7” touch screen/LCD monitor which
allows you take your iSecurity with you anywhere on your property.
Features
• Do-it-yourself (D.I.Y) easy to setup and use 2.4GHz digital wireless
recording system
• Space saving 7” LCD Touch Screen monitor with an Integrated SD digital
video recorder (SD card not included) and 1800mAh rechargeable battery
• Remote monitoring by Smartphone/Tablet/PC
• Docking station with charging base and Ethernet network connection
• Includes one Pan Tilt indoor digital wireless camera with IR LEDs for night
vision (30ft B/W)
• Increased range of transmission up to 200ft between walls and up to 490ft

2
in clear line of sight
• No Wi-Fi interference; no interference from crowded analog devices
• 900MHz/2.4GHz/5.8GHz/6.0GHz devices
• Secure signal: neighbors cannot pick up the signal or listen in
• Built-in microphone for audible recording up to 30ft away
• Motion detection and manual recording with optional video (mp4) or picture
selection (JPEG)
• Auto overwrite function when SD is full
• Records up to 10240 30sec video clips (single channel live view) on a 32gb SD
card (not included) with time and date stamp
• Upgradable by adding 3 more cameras (same SM-821DT or compatible SM-
816DTX)
• Records 1 channel at 25fps or all 4 channels at the same time (in Quad mode)
at 15fps
• Single channel full screen, auto sequential rotation or Quad view display
• Playback directly from the receiver or PC via SD card reader with any media
player software
Restrictions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages. Retain and follow all product
safety and operating instructions. Observe all warnings in the product
operating instructions. To reduce the risk of bodily injury, electric shock, fire
and damage to the equipment, observe the following precautions.
PLEASE NOTE that under certain circumstances, audio/video recording
may be PROHIBITED by law. This device should be used only in compliance
with all applicable federal, state and local statutes.
• DO NOT place this product too close to medical equipment.

3
1. Radio waves may potentially cause breakdown of medical electrical
equipment and thus cause incidents.
2. Place this product at least 22cm from the heart pacemaker. Radio
wave potentially influences heart pacemaker and thus leads to
respiratory disturbance.
• DO NOT uses this product to monitor equipment or activities that are
relevant to one’s privacy.
Monitoring one’s private activities without consent is illegal and this
product is not designed or manufactured for these purposes.
• DO NOT use this product to carry out any illegal activities such as
sneak preview, and etc.
SecurityMan shall not be responsible for any consequences of illegal
conducts made by users.
• DO NOT put the plastic package bags in reach of children or babies.
Young children can choke on these items if they put them into their
mouths.
• DO NOT plug the AC adapter into the outlet in improper situations.
• Plugging in an AC adapter with wet hands might cause electric shock.
• Plugging in the AC adapter unsteadily might cause re or electric
shock.
• DO NOT cover the AC adapter when it is connected to an outlet, place
the adapter near heaters, or put it on the floor which is equipped with
a heater. The above mentioned operation might cause fire or
incidents.

4
• DO NOT use it aboard; please abide by the airway’s provision. It might
influence communication aboard and the flying apparatus if departing
from the airway’s regulation. This will result in accident, possible
death and severe physical hurt.
• DO NOT disassemble or repair the camera, receiver or other relevant
peripheral equipment s by yourself. Improper disassembly might
cause damages to the product or the peripheral equipment.
• DO NOT put the camera in quaky paces. The camera may be unstable
or out of operation if installed improperly. Such installation may also
cause breakdown.
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing
the antenna might influence the receiving of electromagnetic wave,
and thereby influence the receiving eect.
• DO NOT use the camera in complex environment, the obstruction of
stumbling block will aect the electromagnetic wave and influence
the receiving range. Wall, tree and other stumbling block might
absorb, reflect the electromagnetic wave, and influence the receiving
range.
• DO NOT use the camera in the places which are covered with
metal. The around metal, such as elevator and cabin, might shield the
electromagnetic wave, and result in inability to receive signals.
Conditions
Please read the following messages to make sure your working

5
environment is suitable.
• The temperature should be kept between –10˚C and 50˚C (14˚F to
122˚F). The relative humidity should be kept between 20% and 80%.
• Avoid putting the product in places where temperature or humidity
may change rapidly.
• Keep it dry, dustless and avoid lens exposure in direct sunlight.
• Keep product away from heat sources such as electric heaters.
• Do not use the camera near harmful chemicals.
• Do not place product near any strong magnetic objects
• It might influence the normal operation of the product if used at the
fringe range of normal temperature. Please turn o the power when
not in use.
• Do not disassemble the product.
• Do not shake or strike the product.
• Please obey the local government’s environment protection policy.

6
Package Contents
1 x Mounting
Bracket
1x SM-871DR
1x Ethernet Cable 2 x AC aDAPTERS Quick Start Guide
1x SM-821DT
(W/Antennas)
Mounting Screws User’s Manual

7
Product Basics
CAMERA (SM-821DT)
RECEIVER (SM-871DR)

8
Quick Start
Hardware Setup/ Installation
RECEIVER (SM-871DR)
NOTE: The docking station must remain connected to your router in order for you to be
able to remotely view you cameras using a Smartphone or tablet.

9
CAMERA (SM-821DT)
NOTE: Please make sure that your cameras are paired to your receiver before mounting
them.

10
Smartphone Remote Access
Android
Fig. 2.1 Fig. 2.2 Fig. 2.3
Please make sure that the docking station is connected to your router
using an Ethernet cable and that your DVR is sitting on the docking
station.
NOTE: You will not be able to access your system remotely if the DVR is
o the cradle.
1. Open the Play Store on your mobile device. Then search for and install
the “WatchBot” application developed by “Eric Xu”. Once installed, tap
on the “WatchBot” icon (Fig. 2.1), select “+” to add a new device (Fig.
2.2) and then select the “QR Scan” option (Fig. 2.3).o the cradle.

11
Fig.2.4 Fig. 2.5 Fig. 2.6
2. Aim your camera at the QR Code located on the bottom of the dock
station (Fig. 2.4) so that the app can capture your Device ID. Create a
System name (Fig. 2.5) and enter the Device Password that is associated
with your system (Fig. 2.6).
NOTE: The default password is 123456.
3. When you are done entering the Device Name and Password tap on
“Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live
view screen (Fig. 2.9).

12
Fig. 2.7 Fig. 2.8 Fig. 2.9
iPhone
1. Open the App Store on your mobile device. Then search for and install
the “WatchBot” application developed by “Long Xu”. Once installed,
tap on the “WatchBot” icon (Fig. 2.1), select “+” to add a new device
(Fig. 2.2) and then select the “Scan” option (Fig. 2.3).

13
Fig. 2.1 Fig. 2.2 Fig. 2.3
2. Aim your camera at the QR Code located on the bottom of the dock
station (Fig. 2.4) so that the app can capture your Device ID. Create a
System name (Fig. 2.5) and enter the Device Password that is associated
with your system (Fig. 2.6).
NOTE: The default password is 123456.

14
Fig. 2.4 Fig. 2.5 Fig. 2.6
3. When you are done entering the Device Name and Password tap on
“Save” (Fig. 2.7). Now select your device (Fig. 2.8) to bring up the live
view screen (Fig. 2.9).
NOTE: When accessing your system for the first time, the app will
prompt you for permission to use your phones microphone. Please tap
“OK” if you would like to hear audio from your camera when available.

15
Basic Operations
Turning the DVR On/OFF
To turn your DVR On/O, press and hold the Power button.
Fig. 2.7 Fig. 2.8 Fig. 2.9