NUUO G3 Card Mounting instructions

The Intelligent Surveillance Solution
Hardware & Software Installation
user’s manual
Ver. 99.320.0129.001

Intelligent Surveillance Solution
Table of Contents
page-1
T
TA AB BL LE E O OF F C CO ON NT TE EN NT TS S
TABLE OF CONTENTS ..............................................................................................1
1000 SERIES; 2000 SERIES; 3000 SERIES..................................................................2
Product Specification........................................................................................2
Hardware Installation.........................................................................................3
System Requirement..........................................................................................9
4000 SERIES ............................................................................................................10
Product Specification......................................................................................10
Hardware Installation.......................................................................................11
System Requirement........................................................................................12
5000 SERIES ............................................................................................................13
Product Specification......................................................................................13
Hardware Installation.......................................................................................14
System Requirement........................................................................................16
6000 SERIES ............................................................................................................17
Product Specification......................................................................................17
Hardware Installation.......................................................................................18
System Requirement........................................................................................20
7000 SERIES ............................................................................................................21
Product Specification......................................................................................21
Hardware Installation.......................................................................................22
System Requirement........................................................................................24
DRIVER INSTALLATION ..........................................................................................25
SOFTWARE INSTALLATION....................................................................................27

Intelligent Surveillance Solution
Product Specification
page-2
1
10 00 00 0 S SE ER RI IE ES S; ; 2 20 00 00 0 S SE ER RI IE ES S; ; 3 30 00 00 0 S SE ER RI IE ES S
Product Specification
G3 Card
3000 Series 2000 Series 1000 Series
Display Rate 120fps(NTSC);
100fps (PAL) 60fps(NTSC); 50fps (PAL) 30fps(NTSC); 25fps (PAL)
Recording Rate 120fps(NTSC);
100fps (PAL) 60fps(NTSC); 50fps (PAL) 30fps(NTSC); 25fps (PAL)
Maximum Card 2 4 4
Video Input 4; 8; 12; 16 4; 8 4; 8
Audio Input 4 2 1
NTSC: 704x480 ; 640 x 480 ; 352x240
Video Resolution PAL: 704x576 ; 640 x 576 ;352x288
Compression Format
Software Compression MPEG 4

Intelligent Surveillance Solution
Hardware Installation
page-3
Hardware Installation
For G3-card and R-card, the hardware installation steps are all the same
except the connection of Audio/Video Cable. The following figure shows
the detail.
Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video
Cable to the connector in the same color.
Step 2: Turn on your PC and start Windows.
Step 3: Insert the included Software CD into CD-ROM.
Step 4: Refer the section Driver Installation on page 25 to install driver.
Step 5: After driver being installed, restart your PC.

Intelligent Surveillance Solution
Hardware Installation
page-4
Insert the card onto your PC.
Connect the Capture Card and the I/O Card with an included
ribbon cable. You may connect the ribbon cable to one of the
I/O ports on the Capture Card.
Connect the Audio/Video Cable
1. G3-card
Note: for G3-3000 series, audio channels are located at 1, 2, 3, 4.
2. R-card
Note: for R- 3000 series, audio channels are located at 1,5,9,13.
Optional I/O Card referring to the figures on the following pages.

Intelligent Surveillance Solution
Hardware Installation
page-5
G3-3000 Series Capture Card
I/O Card
Relay Out 1-4
Alarm Input 1-4
Ground
RS-232 to RS-485
RS-485

Intelligent Surveillance Solution
Hardware Installation
page-6
G3-2000 Series Capture Card
I/O Card
Relay Out 1-4
Alarm Input
1-4
Ground
RS-232 to RS-485
RS-485

Intelligent Surveillance Solution
Hardware Installation
page-7
G3-1000 Series Capture Card
I/O Card
Relay Out 1-4
Alarm Input
1-4
Ground
RS-232 to RS-485
RS-485

Intelligent Surveillance Solution
Hardware Installation
page-8
G3-card Watchdog Installation

Intelligent Surveillance Solution
System Requirement
page-9
System Requirement
SCB-3000 x2
(240fps) SCB-3000 (120fps) SCB-2000 (60fps) SCB-1000 (30fps)
CPU Intel Core 2
Duo
E6400
Intel Pentium
D 930 Intel P4 2.8 GHz Intel P4 2.8 GHz
RAM 2 GB 1 GB 1 GB 1 GB
Mother-
board Intel 945 or 965 chip, Intel Chipset recommended
Display ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945 / 965, or above (ATI
recommended)
Ethernet 100 BaseT or Above, Gigabit LAN Recommended
Hard Disk 80 GB or above
OS MS Windows XP Pro SP3 / 2003

Intelligent Surveillance Solution
Product Specification
page-10
4
40 00 00 0 S SE ER RI IE ES S
Product Specification
4000 Series
Display Rate 480fps(NTSC); 400fps (PAL)
Recording Rate 480fps(NTSC); 400fps (PAL)
Maximum Card 1
Video Input 16
Audio Input 16
NTSC: 352x240; 704x480
Video Resolution PAL: 352x288; 704x576
Compression Format
Software Compression MPEG 4

Intelligent Surveillance Solution
Hardware Installation
page-11
Hardware Installation
Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video
Cable to the connector in the same color.
Step 2: Turn on your PC and start Windows.
Step 3: Insert the included Software CD into CD-ROM.
Step 4: After driver being installed, restart your PC. See the detail of driver
installation from page 25.
Connect the Audio/Video Cable

Intelligent Surveillance Solution
System Requirement
page-12
System Requirement
SCB-4000 (480fps)
CPU Intel Core 2 Duo E6400
RAM 2 GB
Mother-
board Intel 945 or 965 chip, Intel Chipset recommended
Display ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945 / 965, or
above (ATI recommended)
Ethernet 100 BaseT or Above, Gigabit LAN Recommended
Hard Disk 80 GB or above
OS MS Windows XP Pro SP3 / 2003

Intelligent Surveillance Solution
Product Specification
page-13
5
50 00 00 0 S SE ER RI IE ES S
Product Specification
5016 5008 5004
Display Rate 480fps(NTSC);
400fps (PAL) 240fps(NTSC); 200fps (PAL) 120fps(NTSC); 100fps (PAL)
Recording Rate 480fps(NTSC);
400fps (PAL) 240fps(NTSC); 200fps (PAL) 120fps(NTSC); 100fps (PAL)
Maximum Card 4 4 4
Video Input 16 8 4
Audio Input 16 8 4
NTSC: 176x120; 352x240; 528x320; 704x480
Video Resolution PAL: 176x144; 352x240; 528x320; 704x480
Compression Format
Hardware Compression H.264

Intelligent Surveillance Solution
Hardware Installation
page-14
Hardware Installation
Connecting the Audio/Video Cable - referring to the figure on next page.
The audio input connectors are with white wires and marks of “AID”
on them; the video input connectors are with red wires and the
marks of “VID”.
Note:ItisknownthatNUUO5004 cardhascompatibilityproblemwithPPCIslot.
NUUO5004cardscanonlybeinstalledin SPCI slots.Normally,those3PCIslots
nearesttoCPUarePPCIslots.Avoidinstall5004cardinthese3slots.Ifdriverwas
installedokaybutonestillencounteredaproblemshownbelow,trytoinstallthis5004
cardinanotherPCIslot.

Intelligent Surveillance Solution
Hardware Installation
page-15
5000 Series Capture Card

Intelligent Surveillance Solution
System Requirement
page-16
System Requirement
Total FPS
at CIF 64 channels
32
channels 16 channels
8 channels 4 channels
CPU Intel Core 2 Duo
E6400
Intel
Pentium D
930
Intel
Pentium D
930
Intel P4 2.8
GHz Intel P4 2.8 GHz
RAM 3 GB 2 GB 1 GB 1 GB 1 GB
Mother-
board Intel 945 or 965 chip, Intel Chipset recommended
Display ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945 / 965, or
above (ATI recommended)
Ethernet 100 BaseT or Above, Gigabit LAN Recommended
Hard Disk 80 GB or above
OS MS Windows XP Pro SP3 / 2003

Intelligent Surveillance Solution
Product Specification
page-17
6
60 00 00 0 S SE ER RI IE ES S
Product Specification
6016 6008 6004
Display Rate 480fps(NTSC);
400fps (PAL) 240fps(NTSC); 200fps (PAL) 120fps(NTSC); 100fps (PAL)
Recording Rate
(CIF) 480fps(NTSC); 400fps (PAL) 240fps(NTSC); 200fps (PAL) 120fps(NTSC); 100fps (PAL)
Maximum Card 2 4 4
Video Input 16 8 4
Audio Input 16 8 4
NTSC: 176x120; 352x240; 704x480
Video Resolution PAL: 176x144; 352x288; 704x576
Compression Format
Hardware Compression H.264

Intelligent Surveillance Solution
System Requirement
page-18
Hardware Installation
Connecting the Audio/Video Cable - referring to the figure on next page.
The audio input connectors are with yellow wires and marks of “A”
on them (such as “A1/9”); the video input connectors are with black
wires and the marks of “V” (such as “V8/16”).
Connecting the Watchdog Wire - referring to the figure on next page.
Plug the Watchdog Wire to the Reset connector of the Hardware
Compression Card and then connect it to the Reset connector on
the main board.
With the Watchdog Wire connected, the system will be restarted if
any abnormal conditions.

Intelligent Surveillance Solution
Hardware Installation
page-19
6000 Series Capture Card