Segger J-Link User manual

J-Link / J-Trace
User Guide
Document: UM08001
Software Version: 6.16e
Revision: 0
Date: June 27, 2017
A product of SEGGER Microcontroller GmbH & Co. KG
www.segger.com

2
Disclaimer
Specifications written in this document are believed to be accurate, but are not guaranteed to
be entirely free of error. The information in this manual is subject to change for functional or
performance improvements without notice. Please make sure your manual is the latest edition.
While the information herein is assumed to be accurate, SEGGER Microcontroller GmbH & Co.
KG (SEGGER) assumes no responsibility for any errors or omissions. SEGGER makes and you
receive no warranties or conditions, express, implied, statutory or in any communication with you.
SEGGER specifically disclaims any implied warranty of merchantability or fitness for a particular
purpose.
Copyright notice
You may not extract portions of this manual or modify the PDF file in any way without the prior
written permission of SEGGER. The software described in this document is furnished under a
license and may only be used or copied in accordance with the terms of such a license.
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG, Hilden / Germany
Trademarks
Names mentioned in this manual may be trademarks of their respective companies.
Brand and product names are trademarks or registered trademarks of their respective holders.
Contact address
SEGGER Microcontroller GmbH & Co. KG
In den Weiden 11
D-40721 Hilden
Germany
Tel. [phone]
Fax. [phone]
E-mail: [email protected]
Internet: www.segger.com
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

3
Manual versions
This manual describes the current software version. If you find an error in the manual or a
problem in the software, please report it to us and we will try to assist you as soon as possible.
Contact us for further information on topics or functions that are not yet documented.
Print date: June 27, 2017
Manual
version Revision Date By Description
6.14 6 170407 NV
Chapter “Working with J-Link and J-Trace”
* Section “J-Link scriptfiles”: Updated
“ JLINK_ExecCommand()” description
6.14 5 170320 EL Chapter “J-Flash SPI”
Updated screenshots
6.14 4 170317 NV
Chapter “Working with J-Link and J-Trace”
* Section “J-Link scriptfiles”:
Added: “ JLINK_ExecCommand()”
Section “Keil MDK-ARM” added for Command string execution
6.14 3 170220 NV
Chapter “Working with J-Link and J-Trace”
* Section “J-Link scriptfiles”:
Added: “OnTraceStart()” and “ JLINK_TRACE_Portwidth”
Chapter “Trace”
* Added crossreference to “JLINK_TRACE_Portwidth”
6.14 2 170216 NV
Chapter “Introduction”
*Added Subsubsection “Software and Hardware
Features Overview” to all device Subsections.
*Edited Subsection “”J-Trace ARM.
*Section “Target interfaces and adapters”:
edited “RESET” to “nRESET” and updated description.
6.14 1 170210 NV
Chapter “Working with J-Link and J-Trace”
* Section “Exec Commands”: Updated
SetResetPulseLen
TraceSampleAdjust
Chapter “Trace”
* Section “Tracing via trace pins”: Updated
6.14 0 170201 AG
Chapter “Working with J-Link”
* Section “Exec Commands”: Updated
SelectTraceSource
SetRAWTRACEPinDelay
ReadIntoTraceCache
Chapter “Trace” added.
6.10a 0 160820 EL Chapter “Working With J-Link”
* Section “Exec Commands”: Updated ExcludeFlashCacheRanges.
6.00i 0 160802 EL
Chapter “Introduction”
* Removed “Model Feature Lists”
Chapter “Adding Support for New Devices”:
renamed to “Open Flash Loader”
Chapter “Open Flash Loader” updated.
6.00 1 160617 EL Chapter “J-Flash SPI”
* Added chapter “Custom Command Sequences”
6.00 0 160519 AG Chapter “Adding Support for New Devices” added.
5.12f 0 160503 AB Chapter “Related Software”
* Section “J-Link RTT Viewer” updated and moved from section “RTT”.
5.12d 1 160427 AG Chapter “Working with J-Link and J-Trace”
* Section “J-Link script files” updated.
5.12d 0 160425 AG Chapter “Working with J-Link and J-Trace”
* Section “J-Link script files” updated.
5.12c 0 160413 NG
Chapter “Related Software”
* Section “J-Link Commander”
Typo fixed.
5.12c 1 160418 NG
Chapter “Related Software”
* Section “J-Link Commander”
Commands and commandline options added.
Chapter “Working with J-Link and J-Trace”
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

4
Manual
version Revision Date By Description
* Section “Command strings”
Command “SetRTTTelnetPort” added.
Chapter “Flash Download”
* Section “Debugging applications that change flash contents at runtime”
added.
5.10u 0 160317 AG Chapter “Monitor Mode Debugging”
* Section “Target application performs reset” added.
5.10t 0 160314 AG
Chapter “Monitor Mode Debugging”
* Section “Enable Monitor Debugging” updated.
* Section “Forwarding of Monitor Interrupts” added.
5.10 3 160309 EL Chapter “J-Flash SPI” updated.
5.10 2 160215 AG Chapter “RTT” updated.
5.10 1 151204 AG Chapter “RDI” updated.
Chapter “Semihosting” added.
5.10 0 151127 NG Chapter “Related Software”
* Section “J-Scope” removed.
5.02m 0 151125 AG
Chapter “Working with J-Link and J-Trace”
* Section “The J-Link settings file” added.
Chapter “Low Power Debugging” added.
5.02l 0 151123 AG Various Chapters
* Some typos corrected.
5.02i 1 151106 RH Chapter “J-Flash SPI”
* Section “Send custom commands” added.
5.02i 0 151105 RH
Chapter “Related Software”
* Section “J-Link Commander”
exec command added.
Chapter “Working with J-Link and J-Trace”
* Section “Command strings”
New commands added.
5.02f 1 151022 NG Chapter “Related Software”
* Section “J-Scope” updated.
5.02f 1 151022 EL Chapter “Target interfaces and adapters”
* Section “Reference voltage (VTref)” added.
5.02f 0 151007 RH Chapter “Working with J-Link and J-Trace”
* Section “J-Link script files” updated.
5.02e 0 151001 AG Chapter “Working with J-Link and J-Trace”
* Section “J-Link script files” updated
5.02c 1 150925 NG
Chapter “Licensing”
* Section “Original SEGGER products” updated.
Chapter “Flash download”
* Section “Setup for various debuggers (CFI flash)” updated.
5.02c 0 150916 RH Chapter “Flash download”
* Section “Setup for various debuggers (SPIFI flash)” added.
5.02c 0 150914 RH
Chapter “Introduction”
* Section “J-Link / J-Trace models” updated.
* Section “Supported OS”
Added Windows 10
5.02a 0 150903 AG Chapter “Monitor Mode Debugging” added.
5.02 0 150820 AG
Chapter “Working with J-Link and J-Trace”
* Section “Command strings”
“DisableCortexMXPSRAutoCorrectTBit” added.
5.02 0 150813 AG Chapter “Monitor Mode Debugging” added.
5.00 1 150728 NG
Chapter “Related Software”
* Section “J-Link Commander”
Sub-Section “Command line options” updated.
5.00 0 150609 AG
Chapter “Flash download”
* Section “QSPI flash support” added.
Chapter “Flash breakpoints”
* Section “Flash Breakpoints in QSPI flash” added
5.00 0 150520 EL Chapter “J-Flash SPI”
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

5
Manual
version Revision Date By Description
* Initial version added
4.99b 0 150520 EL
Chapter “Related Software”
* Section “J-Link STM32 Unlock”
Added command line options
4.99a 0 150429 AG Chapter “Target interfaces and Adapters”
Chapter “20-pin J-Link connector”, section “Pinout for SPI” added.
4.98d 0 150427 EL Chapter “Related Software”
* Section “Configure SWO output after device reset” updated.
4.98b 0 150410 AG Chapter “Licensing”
* Section “J-Trace for Cortex-M” updated.
4.98 0 150320 NG
Chapter “Related Software”
* Section “J-Link Commander”
Sub-Section “Commands” added.
Chapter “Working with J-Link and J-Trace”
* Section “J-Link script files” updated
4.96f 0 150204 JL
Chapter “Related Software”
* Section “GDB Server”
Exit code description added.
4.96 0 141219 JL
Chapter “RTT” added.
Chapter “Related Software”
* Section “GDB Server”
Command line option “-strict” added.
Command line option “-timeout” added.
4.90d 0 141112 NG
Chapter “Related Software”
* Section “J-Link Remote Server” updated.
* Section “J-Scope” updated.
4.90c 0 140924 JL Chapter “Related Software”
* Section “JTAGLoad” updated.
4.90b 1 140813 EL
Chapter “Working with J-Link and J-Trace”
* Section “Connecting multiple J-Links / J-Traces to your PC” updated
Chapter “J-Link software”
* Section “J-Link Configurator” updated.
4.90b 0 140813 NG Chapter “Related Software”
* Section “J-Scope” added.
4.86 2 140606 AG Chapter “Device specifics”
* Section “Silicon Labs - EFM32 series devices” added
4.86 1 140527 JL
Chapter “Related Software”
* Section “GDB Server”
Command line options -halt / -nohalt added.
Description for GDB Server CL version added.
4.86 0 140519 AG Chapter “Flash download”
Section “Mentor Sourcery CodeBench” added.
4.84 0 140321 EL
Chapter “Working with J-Link”
* Section “Virtual COM Port (VCOM) improved.
Chapter ”Target interfaces and adapters“
* Section ”Pinout for SWD + Virtual COM Port (VCOM) added.“
4.82 1 140228 EL
Chapter ”Related Software“
* Section ”Command line options“
Extended command line option -speed.
Chapter ”J-Link software and documentation package“
* Section ”J-Link STR91x Commander“
Added command line option parameter to specify a customized
scan-chain.
Chapter ”Working with J-Link“
* Section ”Virtual COM Port (VCOM) added.
Chapter “Setup”
* Section “Getting started with J-Link and DS-5”
4.82 0 140218 JL
Chapter “Related Software”
* Section “GDB Server”
Command line option -notimeout added.
4.80f 0 140204 JL
Chapter “Related Software”
* Section “GDB Server”
Command line options and remote commands added.
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

6
Manual
version Revision Date By Description
4.80 1 131219 JL/
NG
Chapter “Related Software”
* Section “GDB Server”
Remote commands and command line options description improved.
Several corrections.
4.80 0 131105 JL
Chapter “Related Software”
* Section “GDB Server”
SEGGER-specific GDB protocol extensions added.
4.76 3 130823 JL
Chapter “Flash Download”
* Replaced references to GDB Server manual.
Chapter “Working with J-Link”
* Replaced references to GDB Server manual.
4.76 2 130821 JL
Chapter “Related Software”
* Section “GDB Server”
Remote commands added.
4.76 1 130819 JL
Chapter “Related Software”
* Section “SWO Viewer”
Sample code updated.
4.76 0 130809 JL
Chapter “Related Software”
* Sections reordered and updated.
Chapter “Setup”
* Section “Using JLinkARM.dll moved here.
4.71b 0 130507 JL
Chapter ”Related Software“
* Section ”SWO Viewer“
Added new command line options.
4.66 0 130221 JL
Chapter ”Introduction“
* Section ”Supported OS“
Added Linux and Mac OSX
4.62b 0 130219 EL
Chapter ”Introduction“
* Section ”J-Link / J-Trace models“
Clock rise and fall times updated.
4.62 0 130129 JL
Chapter ”Introduction“
* Section ”J-Link / J-Trace models“
Sub-section ”J-link ULTRA“ updated.
4.62 0 130124 EL
Chapter ”Target interfaces and adapters“
* Section ”9-pin JTAG/SWD connector“
Pinout description corrected.
4.58 1 121206 AG Chapter ”Introduction“
* Section ”J-Link / J-Trace models“ updated.
4.58 0 121126 JL
Chapter ”Working with J-Link“
* Section ”J-Link script files“
Sub-section ”Executing J-Link script files“ updated.
4.56b 0 121112 JL
Chapter ”Related Software“
* Section ”J-Link SWO Viewer“
Added sub-section ”Configure SWO output after device reset“
4.56a 0 121106 JL
Chapter ”Related Software“
* Section ”J-Link Commander“
Renamed ”Commander script files“ to ”Commander files“ and
”script mode“ to ”batch mode“.
4.56 0 121022 AG Renamed ”J-Link TCP/IP Server“ to ”J-Link Remote Server“
4.54 1 121009 JL Chapter ”Related Software“
* Section ”TCP/IP Server“, subsection ”Tunneling Mode“ added.
4.54 0 120913 EL
Chapter ”Flash Breakpoints“
* Section ”Licensing“ updated.
Chapter ”Device specifics“
* Section ”Freescale“, subsection ”Data flash support“ added.
4.53c 0 120904 EL Chapter ”Licensing“
* Section ”Device-based license“ updated.
4.51h 0 120717 EL
Chapter ”Flash download“
* Section ”J-Link commander“ updated.
Chapter ”Support and FAQs“
* Section ”Frequently asked questions“ updated.
Chapter ”J-Link and J-Trace related software“
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

7
Manual
version Revision Date By Description
* Section ”J-Link Commander“ updated.
4.51e 1 120704 EL Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated and corrected. Added reset type 8.
4.51e 0 120704 AG Chapter ”Device specifics“
* Section ”ST“ updated and corrected.
4.51b 0 120611 EL Chapter ”J-Link and J-Trace related software“
* Section ”SWO Viewer“ added.
4.51a 0 120606 EL
Chapter ”Device specifics“
* Section ”ST“, subsection ”ETM init“ for some STM32 devices added.
* Section ”Texas Instruments“ updated.
Chapter ”Target interfaces and adapters“
* Section ”Pinout for SWD“ updated.
4.47a 0 120419 AG Chapter ”Device specifics“
* Section ”Texas Instruments“ updated.
4.46 0 120416 EL Chapter ”Support“ updated.
4.42 0 120214 EL Chapter ”Working with J-Link“
* Section ”J-Link script files“ updated.
4.36 1 110927 EL
Chapter ”Flash download“ added.
Chapter ”Flash breakpoints“ added.
Chapter ”Target interfaces and adapters“
* Section ”20-pin JTAG/SWD connector“ updated.
Chapter ”RDI“ added.
Chapter ”Setup“ updated.
Chapter ”Device specifics“ updated.
4.36 0 110909 AG Chapter ”Working with J-Link“
* Section ”J-Link script files“ updated.
4.26 1 110513 KN Chapter ”Introduction“
* Section ”J-Link / J-Trace models“ corrected.
4.26 0 110427 KN Several corrections.
4.24 1 110228 AG
Chapter ”Introduction“
* Section ”J-Link / J-Trace models“ corrected.
Chapter ”Device specifics“
* Section ”ST Microelectronics“ updated.
4.24 0 110216 AG
Chapter ”Device specifics“
* Section ”Samsung“ added.
Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated.
Chapter ”Target interfaces and adapters“
* Section ”9-pin JTAG/SWD connector“ added.
4.23d 0 110202 AG
Chapter ”J-Link and J-Trace related software“
* Section ”J-Link software and documentation package in detail“ updated.
Chapter ”Introduction“
* Section ”Built-in intelligence for supported CPU-cores“ added.
4.21g 0 101130 AG
Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated.
Chapter ”Device specifics“
* Section ”Freescale“ updated.
Chapter ”Flash download and flash breakpoints
* Section “Supported devices” updated
* Section “Setup for different debuggers (CFI flash)” updated.
4.21 0 101025 AG Chapter “Device specifics”
* Section “Freescale” updated.
4.20j 0 101019 AG Chapter “Working with J-Link”
* Section “Reset strategies” updated.
4.20b 0 100923 AG Chapter “Working with J-Link”
* Section “Reset strategies” updated.
0.00 90 100818 AG
Chapter “Working with J-Link”
* Section “J-Link script files” updated.
* Section “Command strings” updated.
Chapter “Target interfaces and adapters”
* Section “19-pin JTAG/SWD and Trace connector” corrected.
Chapter “Setup”
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

8
Manual
version Revision Date By Description
* Section “J-Link Configurator added.”
0.00 89 100630 AG Several corrections.
0.00 88 100622 AG Chapter “J-Link and J-Trace related software”
* Section “SWO Analyzer” added.
0.00 87 100617 AG Several corrections.
0.00 86 100504 AG
Chapter “Introduction”
* Section “J-Link / J-Trace models” updated.
Chapter “Target interfaces and adapters”
* Section “Adapters” updated.
0.00 85 100428 AG Chapter “Introduction”
* Section “J-Link / J-Trace models” updated.
0.00 84 100324 KN
Chapter “Working with J-Link and J-Trace”
* Several corrections
Chapter Flash download & flash breakpoints
* Section “Supported devices” updated
0.00 83 100223 KN Chapter “Introduction”
* Section “J-Link / J-Trace models” updated.
0.00 82 100215 AG Chapter “Working with J-Link”
* Section “J-Link script files” added.
0.00 81 100202 KN
Chapter “Device Specifics”
* Section “Luminary Micro” updated.
Chapter “Flash download and flash breakpoints”
* Section “Supported devices” updated.
0.00 80 100104 KN Chapter “Flash download and flash breakpoints
* Section ”Supported devices“ updated
0.00 79 091201 AG
Chapter ”Working with J-Link and J-Trace“
* Section ”Reset strategies“ updated.
Chapter ”Licensing“
* Section ”J-Link OEM versions“ updated.
0.00 78 091023 AG Chapter ”Licensing“
* Section ”J-Link OEM versions“ updated.
0.00 77 090910 AG Chapter ”Introduction“
* Section ”J-Link / J-Trace models“ updated.
0.00 76 090828 KN
Chapter ”Introduction“
* Section” Specifications“ updated
* Section ”Hardware versions“ updated
* Section ”Common features of the J-Link product family“ updated
Chapter ”Target interfaces and adapters“
* Section ”5 Volt adapter“ updated
0.00 75 090729 AG
Chapter ”Introduction“
* Section ”J-Link / J-Trace models“ updated.
Chapter ”Working with J-Link and J-Trace“
* Section ”SWD interface“ updated.
0.00 74 090722 KN
Chapter ”Introduction“
* Section ”Supported IDEs“ added
* Section ”Supported CPU cores“ updated
* Section ”Model comparison chart“ renamed to
”Model comparison“
* Section ”J-Link bundle comparison chart“ removed
0.00 73 090701 KN
Chapter ”Introduction“
* Section ”J-Link and J-Trace models“ added
* Sections ”Model comparison chart“ &
”J-Link bundle comparison chart“added
Chapter ”J-Link and J-Trace models“ removed
Chapter ”Hardware“ renamed to ”Target interfaces & adapters“
* Section ”JTAG Isolator“ added
Chapter ”Target interfaces and adapters“
* Section ”Target board design“ updated
Several corrections
0.00 72 090618 AG
Chapter ”Working with J-Link“
* Section ”J-Link control panel“ updated.
Chapter ”Flash download and flash breakpoints“
* Section ”Supported devices“ updated.
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

9
Manual
version Revision Date By Description
Chapter ”Device specifics“
* Section ”NXP“ updated.
0.00 71 090616 AG Chapter ”Device specifics“
* Section ”NXP“ updated.
0.00 70 090605 AG
Chapter ”Introduction“
* Section ”Common features of the J-Link
product family“ updated.
0.00 69 090515 AG
Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated.
* Section ”Indicators“ updated.
Chapter ”Flash download and flash breakpoints“
* Section ”Supported devices“ updated.
0.00 68 090428 AG
Chapter ”J-Link and J-Trace related software“
* Section ”J-Link STM32 Commander“ added.
Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated.
0.00 67 090402 AG Chapter ”Working with J-Link“
* Section ”Reset strategies“ updated.
0.00 66 090327 AG
Chapter ”Background information“
* Section ”Embedded Trace Macrocell (ETM)“ updated.
Chapter ”J-Link and J-Trace related software“
* Section ”Dedicated flash programming utilities for J-Link“ updated.
0.00 65 090320 AG Several changes in the manual structure.
0.00 64 090313 AG Chapter ”Working with J-Link“
* Section ”Indicators“ added.
0.00 63 090212 AG
Chapter ”Hardware“
* Several corrections.
* Section ”Hardware Versions“ Version 8.0 added.
0.00 62 090211 AG
Chapter ”Working with J-Link and J-Trace“
* Section ”Reset strategies“ updated.
Chapter J-Link and J-Trace related software
* Section ”J-Link STR91x Commander (Command line tool)“ updated.
Chapter ”Device specifics“
* Section ”ST Microelectronics“ updated.
Chapter ”Hardware“ updated.
0.00 61 090120 TQ Chapter ”Working with J-Link“
* Section ”Cortex-M3 specific reset strategies“
0.00 60 090114 AG Chapter ”Working with J-Link“
* Section ”Cortex-M3 specific reset strategies“
0.00 59 090108 KN
Chapter Hardware
* Section ”Target board design for JTAG“ updated.
* Section ”Target board design for SWD“ added.
0.00 58 090105 AG Chapter ”Working with J-Link Pro“
* Section ”Connecting J-Link Pro the first time“ updated.
0.00 57 081222 AG
Chapter ”Working with J-Link Pro“
* Section ”Introduction“ updated.
* Section ”Configuring J-Link Pro via web interface“ updated.
Chapter ”Introduction“
* Section ”J-Link Pro overview“ updated.
0.00 56 081219 AG
Chapter ”Working with J-Link Pro“
* Section ”FAQs“ added.
Chapter ”Support and FAQs“
* Section ”Frequently Asked Questions“ updated.
0.00 55 081218 AG Chapter ”Hardware“ updated.
0.00 54 081217 AG Chapter ”Working with J-Link and J-Trace“
* Section ”Command strings“ updated.
0.00 53 081216 AG Chapter ”Working with J-Link Pro“ updated.
0.00 52 081212 AG
Chapter ”Working with J-Link Pro“ added.
Chapter ”Licensing“
* Section ”Original SEGGER products“ updated.
0.00 51 081202 KN Several corrections.
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG

10
Manual
version Revision Date By Description
0.00 50 081030 AG Chapter ”Flash download and flash breakpoints“
* Section ”Supported devices“ corrected.
0.00 49 081029 AG Several corrections.
0.00 48 080916 AG
Chapter ”Working with J-Link and J-Trace“
* Section ”Connecting multiple J-Links /
J-Traces to your PC“ updated.
0.00 47 080910 AG Chapter ”Licensing“ updated.
0.00 46 080904 AG
Chapter ”Licensing“ added.
Chapter ”Hardware“
Section ”J-Link OEM versions“ moved to chapter ”Licensing“
0.00 45 080902 AG
Chapter ”Hardware“
Section ”JTAG+Trace connector“ JTAG+Trace
connector pinout corrected.
Section ”J-Link OEM versions“ updated.
0.00 44 080827 AG Chapter ”J-Link control panel“ moved to chapter ”Working with J-Link“.
Several corrections.
0.00 43 080826 AG Chapter ”Flash download and flash breakpoints“
Section ”Supported devices“ updated.
0.00 42 080820 AG Chapter ”Flash download and flash breakpoints“
Section ”Supported devices“ updated.
0.00 41 080811 AG
Chapter ”Flash download and flash breakpoints“ updated.
Chapter ”Flash download and flash breakpoints“,
section ”Supported devices“ updated.
0.00 40 080630 AG
Chapter ”Flash download and flash breakpoints“ updated.
Chapter ”J-Link status window“ renamed to ”J-Link control panel“
Various corrections.
0.00 39 080627 AG
Chapter ”Flash download and flash breakpoints“
Section ”Licensing“ updated.
Section ”Using flash download and flash
breakpoints with different debuggers“ updated.
Chapter ”J-Link status window“ added.
0.00 38 080618 AG
Chapter ”Support and FAQs“
Section ”Frequently Asked Questions“ updated
Chapter ”Reset strategies“
Section ”Cortex-M3 specific reset strategies“ updated.
0.00 37 080617 AG Chapter ”Reset strategies“
Section ”Cortex-M3 specific reset strategies“ updated.
0.00 36 080530 AG
Chapter ”Hardware“
Section ”Differences between different versions“ updated.
Chapter ”Working with J-Link and J-Trace“
Section ”Cortex-M3 specific reset strategies“ added.
0.00 35 080215 AG Chapter ”J-Link and J-Trace related software“
Section ”J-Link software and documentation package in detail“ updated.
0.00 34 080212 AG
Chapter ”J-Link and J-Trace related software“
Section ”J-Link TCP/IP Server (Remote J-Link / J-Trace use)“ updated.
Chapter ”Working with J-Link and J-Trace“
Section ”Command strings“ updated.
Chapter ”Flash download and flash breakpoints“
Section ”Introduction“ updated.
Section ”Licensing“ updated.
Section ”Using flash download and flash breakpoints with
different debuggers“ updated.
0.00 33 080207 AG
Chapter ”Flash download and flash breakpoints“ added
Chapter ”Device specifics:“
Section ”ATMEL - AT91SAM7 - Recommended init sequence“ added.
0.00 32 080129 SK Chapter ”Device specifics“:
Section ”NXP - LPC - Fast GPIO bug“ list of device enhanced.
0.00 31 080103 SK Chapter ”Device specifics“:
Section ”NXP - LPC - Fast GPIO bug“ updated.
0.00 30 071211 AG
Chapter ”Device specifics“:
Section ”Analog Devices“ updated.
Section ”ATMEL“ updated.
J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG