SEI ASPEN FA700400TX User manual

FA700400TX
“ASPEN” GEL FIREPLACE
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
© Southern Enterprises Inc. All Right Reserved
.

FA700400TX
“ASPEN” GEL FIREPLACE
Assembly Instruction
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
1) Fireplace frame
1 PC
(2) Fuel canister holder
3 PCS (3)Candle holder 1 PC
(4)Glass panel 1PC (A) Adhesive pad
3 PCS
1 extra included
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.

FA700400TX
“ASPEN” GEL FIREPLACE
Assembly Instruction
DANGER
PLEASE USE IN WELLVENTILATED AREA
The fireplace will have open flames and will generate heat.
Make sure to keep all combustible items away from the fireplace when the gel fuel is
burning.
DO NOT touch the fireplace when the gel fuel is burning.
1. Attach adhesive pad (A) to
the bottom right/left of glass
panel (4) first. Then insert
the glass into the slot as
shown.
Figure 1 – Install Fireplace
12

Figure 2 –Fuel Canister Holder and Gel Fuel Canister
3. Install the gel fuel holders
into the fireplace into the
appropriate mounting hole (3,
Figure 2) in the fireplace.
4. Following the instructions
on the gel fuel canister,
remove the lid (2, Figure 3)
from the gel fuel canister (1,
Figure 3), and using a long
match, light the fuel in each of
the canister. Candle holder
can be used to extinguish fire.
Figure 3 –Fuel Canister Installed
2. Remove the fuel canister
holders (2, Figure 3) from the
fireplace and install one gel
fuel canister (1, Figure 3) into
each of the holders.
NOTICE
Make sure to remove the gel
fuel canister paper label (4,
Figure 3) before installing the
canister into the holder.
Shake the gel fuel canister
before installing it into the
canister holder.

DANGER
PROLONGED USE OFTHE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE
TO BECOME HOTAND POTENTIALLY CAN CAUSE BURNS IFTOUCHED.
DO NOT BURN MORE THAN THREE CANISTERS OF FUELAT ONE TIME.
BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED
FROM EACH OF THE GEL FUEL CANISTERS.
USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL.
DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTILTHE FLAME HAS BEEN
EXTINGUISHED FOR 20 MINUTES.
DO NOT BURN ANYTHING EXCEPT THE SPECIFIED CANISTERS OF GEL FUEL IN THE
FIREBOX.
KEEPCHILDREN AWAY FROM THE FIREPLACE WHEN IN USE.
KEEP FLAMABLE OBJECTS, SUCH AS CURTAINS OR DRAPERYS, AWAY FROM THE
FIREPLACE WHEN THE GEL FUEL HAS BEEN IGNITED.
MAKE SURE THE CUSTOMER DOES NOT PLACE ANY DECORATIVE ITEMS ON TOPOF
THE UNITAT ANYTIME.
DO NOT TOUCH THE UPPER PART OFTHE UNIT WHILE IT IS STILLIN OPERATION.
THE CANDLE HOLDER ACTS AS ACOVER TO PUT OUT FIRE IF ONE WISHES TO STOP
THE FLAME.
NEVER LEAVE BURNING GEL FUEL UNATTENDED.
CARE INSTRUCTION: WIPE DOWN UNITAND CANDLE HOLDER WITH SOFT DAMP
CLOTH.
WHEN USINGTHE CANDLE HOLDER PLEASE MAKE SURE THAT THE CANNISTER
HOLDERS ARE IN PLACE.

We'd love to hear from you! Email us photos of our products in your home at [email protected] and
we might feature it on our site or use it to model one of our inspirational photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY”
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide
parts and label them to correspond with part list. Extra hardware may be included. If any items are missing, please
contact Southern Enterprises at 800-633-5096 or in Dallas [phone]/ 9am – 4pm Mon-Fri Central time if you
have product issues with your purchase. Please ask for a customer service representative for issues involving
damages or replacement parts. Please ask for a technical assistance representative for any issues with product
assembly and product construction. Please contact the retailer that you purchased from for returns.
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. We do not
recommend modifying product(s) and we are not responsible for any damages due to product modification(s).
If this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to
provide parts or replacements merchandise. Parts will not be available for items arriving fully assembled.