SEI FA584700TX User manual

FA584700TX
Portable Indoor/Outdoor
Fireplace
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
© Southern Enterprises Inc. All Right Reserved
.

FA584700TX
Portable Indoor/Outdoor Fireplace
Assembly Instruction
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with your unit.
Suggested tools: Phillip head screw driver, power drill, ¼” drill bit, 24”
level, and a tape measure.
(A) Fireplace frame
1 PC
(B) Fuel canister holder
2 PCS
(C)Candle holder
1 PC
(D)Glass panel
2PCS
(E) Adhesive pad
8PCS
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
The finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.

FA584700TX
Portable Indoor/Outdoor Fireplace
Assembly Instruction
DANGER
PLEASE USE IN WELL VENTILATED AREA
The fireplace will have open flames and will generate heat.
Make sure to keep all combustible items away from the fireplace when the gel fuel
is burning.
DO NOT touch the fireplace when the gel fuel is burning.
Not recommended for use on wall paper or wood paneled walls due to risk of
discoloration over time.
1. Put adhesive pad (E) onto
the fireplace frame (A) as
shown, then insert glass
panel (D) into the holder as
shown.
Figure 1 – Install Fireplace

2. Remove the fuel canister
holders (2,Figure 3) from the
fireplace and install one gel
fuel canister(1, Figure 3) into
each of the holders.
NOTICE
Make sure to remove the gel
fuel canister paper label
(4,Figure 3) before installing
the canister into the holder.
Shake the gel fuel canister
before installing it into the
canister holder.
3. Install the gel fuel holders
into the fireplace into the
appropriate mounting hole (3,
Figure 2) in the fireplace.
4. Following the instructions
on the gel fuel canister,
remove the lid (2,Figure 3)
from the gel fuel canister
(1,Figure 3), and using a long
match, light the fuel in each
of the canister. Candle holder
can be used to extinguish
fire.
Figure 2 –Fuel Canister Holder and Gel Fuel Canister
Figure 3 –Fuel Canister Installed

DANGER
PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE
TO BECOME HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED.
DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME.
BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED
FROM EACH OF THE GEL FUEL CANISTERS.
USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL.
DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTIL THE FLAME HAS BEEN
EXTINGUISHED FOR 20 MINUTES.
DO NOT BURN ANYTHING EXCEPT THE SPECIFIED CANISTERS OF GEL FUEL IN THE
FIREBOX.
KEEP CHILDREN AWAY FROM THE FIREPLACE WHEN IN USE.
KEEP FLAMABLE OBJECTS, SUCH AS CURTAINS OR DRAPERYS, AWAY FROM THE
FIREPLACE WHEN THE GEL FUEL HAS BEEN IGNITED.
MAKE SURE THE CUSTOMER DOES NOT PLACE ANY DECORATIVE ITEMS ON TOP OF
THE UNIT AT ANYTIME.
DO NOT TOUCH THE UPPER PART OF THE UNIT WHILE IT IS STILL IN OPERATION.
THE CANDLE HOLDER ACTS AS A COVER TO PUT OUT FIRE IF ONE WISHES TO STOP
THE FLAME.
NEVER LEAVE BURNING GEL FUEL UNATTENDED.
CARE INSTRUCTION: WIPE DOWN UNIT AND CANDLE HOLDER WITH SOFT DAMP
CLOTH.
WHEN USING THE CANDLE HOLDER PLEASE MAKE SURE THAT THE CANNISTER
HOLDERS ARE IN PLACE.

We'd love to hear from you! Email us photos of our products in your home at
[email protected] and we might feature it on our site or use it to model one of our inspirational
photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI”
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts.
Southern Enterprises Inc. will provide replacement parts for only those items purchased within the last
9 months. If this product has not been purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacements merchandise. Parts will not be available for items
arriving fully assembled.
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229