SEI walden FA9101 User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
"WALDEN"PETITE FIREPLACE
FA9101 - PLANTATION OAK
FA9102 – CLASSIC MAHOGANY
FA9103 - ANTIQUE WHITE
FA9104 - BLACK
Assembly Instructions

A Quantity
of 8
CAM BOLT
B Quantity
of 16
WOOD DOWEL
C Quantity
of 8
CAM LOCK
D Quantity
of 23
FLAT HEAD LONG SCREW
E Quantity
of 6
SOCKET HEXAGON SCREW
F Quantity
of 6
CAM NUT
G Quantity
of 1
SOCKET HEAD WRENCH
Quantity
of 1
FIREBOX X1PC
SOLD IN A SEPARATE CARTON.
"WALDEN"PETITE FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with
y
our unit.

(1) Quantity
of 1
Middle front panel
(2) Quantity
of 1
Right front panel
(3) Quantity
of 1
Left front panel
(4) Quantity
of 1
Right side panel
(5) Quantity
of 1
Left side panel
(6) Quantity
of 1
Bottom frame
(7) Quantity
of 1
Top frame
(8) Quantity
of 2
Wood holder
(9) Quantity
of 1
Upper cross brace
(10) Quantity
of 2
Back panel (L&R)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
"WALDEN"PETITE FIREPLACE”
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with
y
our unit.

Figure 1
INSERT 2PCS WOOD DOWEL(B)
AND 2PCS CAM BOLT(A) ONTO
PREDRILLED HOLES OF RIGHT/
LEFT FRONT PANELS (2&3). THEN
INSERT 2PCS CAM-LOCKS (C)
INTO BIG HOLES ON BACK OF
MIDDLE FRONT PANEL (1) WITH
SLOT FOR SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCKS
(C) CLOCKWISE TO SECURE
CAM-BOLTS (A). AS FIGURE 1
SHOWN.
Figure 2
FIRSTLY,INSERT 4PCS WOOD
DOWEL(B) AND 6PCS CAM
BOLT(A) ONTO PREDRILLED
HOLES OF RIGHT/LEFT FRONT
PANELS (2&3), THEN INSERT
6PCS CAM-LOCKS (C) INTO BIG
HOLES ON BACK OF RIGHT AND
LEFT SIDE PANEL(4&5) WITH
SLOT FOR SCREWDRIVER FACING
OUTWARD. ROTATE CAM-LOCKS
(C) CLOCKWISE TO SECURE
CAM-BOLTS (A). AS FIGURE 2
SHOWN.
Figure 3
INSERT 6PCS WOOD DOWEL (B)
AND 6PCS SOCKET HEXAGON
SCREW (E) TO CORRESPONDING
HOLES OF BOTOOM FRAME (6)
AND PUT THE ASSEMBLED UNIT
THAT FINISHED AT FIGURE 2
ONTO BOTTOM PANEL
UPRIGHTLY. THEN INSERT 6PCS
CAM-NUT (F) INTO BIG HOLES ON
BACK OF RIGHT/LEFT SIDE PANEL
AND FRONT PANELS (2,3,4,5).AT
LAST ,TIGHTEN (E) WITH SOCKET
HEAD WRENCH(G) DEASIL. AS
FIGURE 3 SHOWN.
"WALDEN"PETITE FIREPLACE”
Assembly Instructions
B
B
G
F
E
B
F
B
6
B
B
A
A
C
C
1
2
3
B
B
B
B
A
A
A
A
C
C
4
5

Figure 4
PUT THE TOP FRAME(7) ONTO
ASSEMBLED FRAME
UPRIGHTLY,THEN INSERT 10PCS
FLAT HEAD LONG SCREW(D)
ONTO CORRESPONDING PLACE
TO ASSEMBLE TOP FRAME AND
PREASSEMBLED UNIT TOGETHER
AS FIGURE 4 SHOWN.
Figure 5
INSERT 4PCS WOOD DOWELS (B)
INTO PREDRILLED HOLES ON
EDGES OF LEFT AND RIGHT BACK
PANELS (10) AND FIT INTO
CORRESPONDING HOLES ON
ENDS OF UPPER CROSS BRACE
(9). AS FIGURE 5 SHOWN.
Figure 6
PUSH THE FRAME ON BACK OF
ABOVE UNIT ONTO
CORRESPONDING FRAME
TIGHTLY ；INSERT 9PCS FLAT
HEAD LONG SCREW (D)
THROUGH PREDRILLED HOLES
ON PARTS (9,10) AND TIGHTEN
IT CLOCKWISELY. AS FIGURE 6
SHOWN.
"WALDEN"PETITE FIREPLACE”
Assembly Instructions
D

Figure 7
INSERT FIREBOX FROM THE BACK
OF FIREPLACE. MAKE SURE
FIREBOX IS PRESSED TIGHTLY
AGAINST THE ASSEMBLED UNIT.
ATTACH WOOD HOLDERS (8) ON
THE SIDES OF FIREBOX. INSERT
4PCS FLAT HEAD LONG SCREW
(D) THROUGH PREDRILLED
HOLES ON WOOD HOLDER (8)
AND TIGHTEN INTO
CORRESPONDING HOLES ON
BACK OF LEFT AND RIGHT BACK
PANELS (10). AS FIGURE 7
SHOWN.
We'd love to hear from you! Email us photos of our products in your home at [email protected] and
we might feature it on our site or use it to model one of our inspirational photos.
8
8
"WALDEN PETITE FIREPLACE”
Assembly Instructions

Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation
to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI. The fireplace mantel will fit both gel fuel and electric firebox inserts.
Depending on the insert ordered only one insert will be included.
WARNING: positioning anything on top of your fireplace mantel poses a degree of risk especially in the case
of electronic appliances or equipment. If you elect to display a television we recommend that it be a slim
profile flat-screen and that it be positioned away from the front edge of the mantel where there is a degree
of heat generated from the firebox. You may also want to tether your flat screen tv to the wall behind it for
added safety and security. Manufacturer assumes no responsibility for items placed on top of a fireplace
mantel.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
StyleNo PartsLetter PartsDescription Quantity Needed
FA9101/02/03/04 - Parts Replacement Form