SEI LINDA FA8514 User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
"LINDA"CORNER FIREPLACE
FA8514 - CLASSIC MAHOGANY
FA8515 – ANTIQUE WHITE
Assembly Instructions

A Quantity
of 14
CAM BOLT
B Quantity
of 18
WOOD DOWEL
C Quantity
of 14
CAM LOCK
D Quantity
of 25
FLAT HEAD LONG SCREW
E Quantity
of 12
FLAT HEAD SCREW
F Quantity
of 3
HINGE
Quantity
of 1
FIREBOX W/SCREEN KIT X1PC
SOLD IN A SEPARATE CARTON.
"LINDA"CORNER FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with
y
our unit.

(1) Quantity
of 2
FRONT PANEL（L&R）
(2) Quantity
of 1
LOWER FRONT PANEL
(3) Quantity
of 1
UPPER FRONT PANEL
(4) Quantity
of 2
SIDE PANEL（L&R）
(5) Quantity
of 1
TOP FRAME
(6) Quantity
of 1
BOTTOM FRAME
(7) Quantity
of 1
SUPPORT LEG
(8) Quantity
of 1
TRIANGLE TOP PANEL
(9) Quantity
of 2
FIXED WOOD
(10) Quantity
of 1
BACK CROSS BAR
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
"LINDA"CORNER FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown in actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below (SHOWN ACTUAL SIZE). You may receive extra
hardware with
y
our unit.

Figure 1
INSERT 2PCS WOOD DOWEL (B)
AND 2PCS CAM BOLT (A) INTO
PREDRILLED HOLES ON END OF
LEFT AND RIGHT FRONT PANELS
(1) AND FIT INTO
CORRESPONDING HOLES OF
LOWER FRONT PANEL(2),THEN
INSERT 2PCS CAM-LOCK (C) INTO
BIG HOLES ON EDGES OF LOWER
FRONT PANEL(2) WITH SLOT FOR
SCREWDRIVER FACING
OUTWARD,ROTATE CAM-LOCK
CLOCKWISE TO SESURE CAM
BOLT..AS FIGURE 1 SHOWN.
Figure 2
INSERT 2PCS WOOD DOWEL (B)
AND 2PCS CAM BOLT (A) INTO
PREDRILLED HOLES ON END OF
UPPER FRONT PANEL (1) AND FIT
INTO CORRESPONDING HOLES
OF FRONT PANELS (L&R)(1),
THEN INSERT 2PCS CAM-LOCK
(C) INTO BIG HOLES ON EDGES
OF FRONT PANELS (L&R)(1) WITH
SLOT FOR SCREWDRIVER FACING
OUTWARD,ROTATE CAM-LOCK
CLOCKWISE TO SESURE CAM
BOLT AS FIGURE 2 SHOWN.
Figure 3
INSERT 4PCS WOOD DOWEL (B)
INTO CORRESPONDING HOLE OF
LEFT AND RIGHT SIDE PANELS
(4) AND FIT INTO
CORRESPONDING HOLES OF
BACK CROSS BAR (10),THEN
INSERT 4PCS FLAT HEAD LONG
SCREW (D) INTO PREDRILLED
HOLES OF BACK CROSS BAR(10)
TO ASSEMBLE LEFT AND RIGHT
SIDE PANEL(4) AND BACK
CROSSBAR (10) TOGETHER AS
FIGURE 3 SHOWN.
"LINDA"CORNER FIREPLACE
Assembly Instructions

Figure 4
INSERT 8PCS WOOD DOWEL (B)
AND 10PCS CAM BOLT (A) INTO
PREDRILLED HOLES ON INSIDE
OF LEFT AND RIGHT FRONT
PANELS (1) AND FIT INTO
CORRESPONDING HOLES OF
SIDE PANEL, THEN INSERT
10PCS CAM-LOCK (C) INTO BIG
HOLES ON EDGES OF LEFT AND R
GHT SIDE PANELS (4) WITH SLOT
FOR SCREWDRIVER FACING
OUTWARD, ROTATE CAM-LOCK
CLOCKWISE TO SESURE CAM
BOLT..AS FIGURE 4 SHOWN.
Figure 5
PUT TOP FRAME(5) ONTO THE
ASSEMBLED UNIT,THEN INSERT
11PCS FLAT HEAD LONG SCREW
(D) ONTO CORRESPONDING
HOLES OF LEFT/RIGHT FRONT
PANELS AND TOP FRAME (1&3)
TO ASSEMBLE THEM TOGETHER
AS FIGURE 5 SHOWN.
Figure 6
INSERT 2PCS FLAT HEAD LONG
SCREW (D) ONTO
CORRESPONDING HOLES OF
SUPPORT LEG (7) TO ASSEMBLE
BOTTOM FRAME (6) AND
SUPPORT LEG TOGETHER; THEN
INSERT 2PCS WOOD DOWEL (B)
ONTO CORRESPONDING HOLE OF
FRONT PNAELS & LOWER FRONT
PANEL (1&2) AND FIT ONTO
CORRESPONDING HOLE OF
BOTTOM FRAME,THEN PUSH
BOTTOM FRAME ONTO THE
UNIT,AND USE 4PCS FLAT HEAD
LONG SCREW(D) TO ASSEMBLE
THEM TOGETHER AS FIGURE6
SHOWN.
"LINDA"CORNER FIREPLACE
Assembly Instructions

Figure 7
USE 3PCS HINGE (F) AND 12PCS
FLAT HEAD SCREW (E) TO
ASSEMBLE TRIANGLE TOP PANEL
(8) AND TOP FRAME (5)
TOGETHER AS FIGURE7 SHOWN.
Figure 8
INSERT THE FIREBOX FROM THE
BACK OF FIREPLACE. MAKE SURE
FIREBOX IS PRESSED TIGHTLY
AGAINST THE ASSEMBLED UNIT.
ATTACH FIXED WOOD (E) ON THE
INSIDES OF FIREBOX. INSERT
4PCS FLAT HEAD LONG SCREWS
(D) THROUGH PREDRILLED
HOLES ON FIXED WOOD (8) AND
TIGHTEN INTO CORRESPONDING
HOLES ON BACK OF LEFT AND
RIGHT BACK PANELS (1). AS
FIGURE 7 SHOWN.
Figure9
NOW YOU CAN ENJOY IT.
"LINDA"CORNER FIREPLACE
Assembly Instructions

Customer Service 1-800-633-5096
servic[email protected] Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
StyleNo PartsLetter PartsDescription QuantityNeeded
FA8514/15 - Parts Replacement Form
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation
to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI.
The fireplace mantel will fit both gel fuel and electric firebox inserts. Depending on the insert ordered only
one insert will be included. Not recommended to put electronic equipment on or above a mantel due to the
heat.