SEI BC107000TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[e-mail]
wwww.seidal.com
BC107000TX
ADJUSTABLE BARSTOOL -
GARRATT
Assembly Instructions

A1pc
Backrest
B 1pc
Seat Cushion With Frame
C1pc
Swivel
D1pc
Leg Frame
E1pc
Leg Frame
F1pc
Foot-Ring
G4pcs
Leg Extensions
H13pcs
Φ1/4”X 1/2”L Bolts
ADJUSTABLE BARSTOOL - GARRATT
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.

I2pcs
Φ1/4”X 7/8”L Bolts
J6pcs
Φ1/4”X 1-1/4”L Bolts
K11pcs
Washers
L11pcs
Lock Washers
M4pcs
Foot-Inserts
N1pc
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.

Figure 1 1. Assemble leg frames (D, E) by inserting the leg
frame (D) (with the center slot on bottom of
crossbar), on top of the leg frame (E) (with the
center slot on top of the crossbar), as shown.
2. Fasten swivel unit (C) to leg frames (D, E) using
four bolts (H) , four lock washers (L) and four
washers (K) (the swivel is reversible and may be
used on either side), as shown.
Figure 2 1. Place the leg frame assembly upside-down.
2. Attach the foot-ring (F) to the leg frames (D, E)
using four bolts (J) and tightening securely using
Allen wrench (N), as shown.
Figure 3 1. Place seat cushion (B) upside down on
cloth-covered work surface. (make sure seat
frame for the legs is facing up.)
2. Secure leg assembly with swivel unit (C) to seat
frame (B) using four bolts (H), four lock washers
(L) and four washers (K), as shown.
ADJUSTABLE BARSTOOL - GARRATT
Assembly Instructions
K
C
L
H
K
L
H
K
L
H
K
L
H
D
E
JJ
JJ
FE
D
K
L
H
K
L
H
K
L
H
K
L
H
B
C

Figure 4.1
Figure 4.2
1. Place seatframe assembly upside down and
fasten the backrest (A) to frame of seat cushion
(B) as shown using one bolt (H), one lock washer
(L) and one washer (K) for the middle hole, only
tighten halfway. Then insert two bolts(I) into the
right and left holes, with one lock washer (L) and
one washer (K), as shown in the enlarged
diagram, using Allen wrench (N), only tighten
halfway..
2. Then insert two bolts (J) into seatback holes from
the inside, as shown in the enlarged diagram,
using the Allen wrench (N).
3. Now fully tighten all bolts securely.
d
JJ
J
J
A
B
A
BK
K
K
KK
K
L
L
L
L
L
L
I
I
H
IH
I

Figure 5(a) You now have two options:
(a) If you choose a 24" seat height :
1. Insert a foot-insert (M) onto each leg (D, E).
2. Place barstool upright on the floor.
M
E
M
M
M
D

Figure 5(b) (b) If you choose a 29" seat height :
1. You need to insert four leg extensions (G)
into leg frames (D, E) using four bolts (H)
and tighten securely.
2. Place barstool upright on the floor.
** We recommend that you save the Allen wrench
(M) and periodically tighten all bolts. Please make
sure all bolts are placed in their proper positions
and then are tightened securely to ensure your
safety.
** Weight restriction: 250 lbs.
** Intended for indoor use only.
H
HHH
G
G
G
G
D
E

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019