SEI MS1071 User manual

SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by-step directions
in order .YOU CAN ASSEMBLE THIS ITEM.
STYLE NO. MS1071 – ESPRESSO FINISH
MS1072 – WHITE FINISH
SLIDING-DOOR WINDOW PANE
MEDIACABINET
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIAL.
HARDWARE LIST
(1) CAM-LOCKS
8PCS
(5) T-BOLTS
4PCS
(2) COVERS
8PCS
(6) SHELF SUPPORTS
20PCS
(3) CAM-BOLTS
8PCS (7) WOOD SCREWS
Ø2.6 x 10mm
32PCS
(4) MACHINE SCREWS
Ø1/4” x 2-1/4”
4PCS
(8) WOOD DOWELS
Ø8 x 30mm
4PCS
PARTS LIST
(A) TOP PANEL 1PC (F) ADJUSTABLE SHELVES 5PCS
(B) LEFT SIDE PANEL 1PC
(G) RIGHT BACK PANEL 1PC
(C) RIGHT SIDE PANEL
1PC
(H) LEFT BACK PANEL 1PC

(D) BASE 1PC (I) LEFT DOOR 1PC
(E) FIXED SHELVES 2PCS
(J) RIGHT DOOR
ASSEMBLY INSTRUCTION
1. SELECTASMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.YOU MAY NEED A PHILLIP
SCREWDRIVER.
2. PLACE LEFT SIDE PANEL (B) SMOOTH SIDE ON FLAT SURFACE,THEN SCREW 2 CAM-BOLTS (3)
INTO PRETHREADED INSERT HOLES ON SIDE PANEL (B) UNTIL STOP. (PLEASE DO NOT
OVERTIGHTEN CAM-BOLTS). ALSO PUSH 2 WOOD DOWELS (8) INTO LARGE OPENING HOLES INTO
LEFT SIDE PANEL (B). REPEAT SAME PROCEDURE FOR RIGHT SIDE PANEL (C). AS FIGURE 1
SHOWN.
3. NOW, INSERT CAM-BOLTS (3), WOOD DOWELS (8) INTO PREDRILLED HOLES ON ENDS OF FIXED
SHELVES (E) AND FIT INTO CORRESPONDING HOLES ON INSIDE OF LEFTAND RIGHT SIDE PANELS
(B, C). INSERT CAM-LOCKS (1) INTO BIG HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C)
WITH SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (1) CLOCKWISE TO
SECURE CAM-BOLTS (3). PUSH COVERS (2) INTO CAM-LOCKS (1). AS FIGURE 1 SHOWN.
4. INSERT T-BOLTS (5) INTO PREDRILLED HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (B, C).
INSERT MACHINE SCREWS (4) THROUGH PREDRILLED HOLES ON UNDERSIDE OF BASE (D) AND
TIGHTEN INTO T-BOLTS (5). PLEASE NOTE THAT IF SCREWS DO NOT TIGHTEN, ROTATE T-BOLTS (5)
SO THAT THREADS OF T-BOLTS (5) FACING MACHINE SCREWS (4). AS FIGURE 1 SHOWN.
FIGURE1 FIGURE2
(2)

5. TIGHTEN CAM-BOLTS (3) INTO THREADED HOLES ON UNDERSIDE OF TOP PANEL (A) AND FIT
INTO CORRESPONDING HOLES ON TOP EDGES OF LEFTAND RIGHT SIDE PANELS (B, C). INSERT
CAM-LOCKS (1) INTO BIG HOLES ON INSIDE OF LEFTAND RIGHT SIDE PANELS (B, C) WITH SLOT
FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (1) CLOCKWISE TO SECURE
CAM-BOLTS (3). PUSH COVERS (2) INTO CAM-LOCKS (1). AS FIGURE 1 SHOWN.
6. FIT SHELF SUPPORTS (6) INTO PREDRILLED HOLES ON INSIDE OF LEFTAND RIGHT SIDE PANELS
(B, C). PUTADJUSTABLE SHELVES (F) ON EACH SHELF SUPPORTS (6) MATCHING THE POSITION OF
GROOVES ON ADJUSTABLE SHELVES (F). AS FIGURE 2 SHOWN.
7. ATTACH LEFT AND RIGHT BACK PANELS (H, G) INTO SLOTS OF PARTS (A, B, C, D). INSERT WOOD
SCREWS (7) THROUGH PREDRILLED HOLES ON LEFTAND RIGHT BACK PANELS (G, H) AND
TIGHTEN INTO REAR EDGES OF PARTS (A, B, C, D). AS FIGURE 3 SHOWN.
8. FIT LEFTAND RIGHT DOORS (I, J) INTO GROOVES ON TOP PANEL AND BASE (A, D). AS FIGURE 4
SHOWN.
FIGURE3 FIGURE4
SHOWN BACK VIEW FORASSEMBLY PURPOSES.
READY
YOUR NEW SLIDING-DOOR WINDOW PANE MEDIA CABINET IS FINISHED AND READY TO
USE.
(7)
(7)
(
7)
(
7)
(
7)
(H)
(G)

Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to
divide parts and label them to correspond with part list. Extra hardware may be included. If any items are
missing, please contact our parts/service department at [phone] or in Dallas [phone]/ 9am –
4pm Mon-Fri Central time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE
DO NOT SELL PARTS. WE DO NOT RECOMMEND MODIFYING PRODUCT(S) AND WE ARE NOT
RESPONSIBLE FOR ANY DAMAGES DUE TO PRODUCT MODIFICATION(S). If this product has not
been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or
replacement merchandise. Parts will not be available for items arriving fully assembled.
"We will ship parts if available" "This is not a warranty"
PARTS REPLACEMENT FORM
STYLE NO:MS1071/MS1072
Customer Name PARTS
LETTER PART DESCRIPTION QUANTITY NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
Please indicate color/size/style number
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229
/ /