SEI ASHBOURNE Installation guide

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[e-mail]
wwww.seidal.com
BC111000TX / BC111500TX
SWIVEL BARSTOOL /
COUNTERSTOOL - ASHBOURNE
Assembly Instructions

A1pc
Backrest
B 1pc
Seat Cushion With Frame
C4pcs
Legs
D1pc
Foot-Ring
E12pcs
Φ1/4”X 1/2”L Bolts
F3pcs
Φ1/4”X 1-1/8”L Bolts
G2pcs
Washers
H2pcs
Lock Washers
SWIVEL BARSTOOL / COUNTERSTOOL - ASHBOURNE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.

I1pc
Nut
J1pc
Open Wrench
K1pc
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.

Figure 1.1
Figure 1.2
1. Place seat cushion (B) upside down on
protected work surface.
2. Place backrest (A) upside down and fasten
the backrest (A) to frame of seat cushion (B)
using one bolt (F) (going from outside to
inside), and one nut (I) for the middle hole,
as shown in the enlarged diagram, using the
open wrench (J) and Allen wrench (K), only
tighten halfway.
3. Then insert two bolts (F) into the right and
left holes from the inside, with one lock
washer (H) and one washer (G), as shown in
the enlarged diagram, using the Allen
wrench (K).
4. Now fully tighten all bolts securely.
Figure 2 Attach four legs (C) to seat frame (B) using eight
bolts (E). Make sure that each leg (C) is
positioned exactly as shown, and that you only
tighten the bolts halfway, using the Allen wrench
(K).
SWIVEL BARSTOOL / COUNTERSTOOL - ASHBOURNE
Assembly Instructions
C
E
B
FK
H
G
B
A
B
A
FK
J
I

Figure 3 1. Position the foot-ring (D) as shown. Fasten
it to the four legs (C) using four bolts (E)
with Allen wrench (K) exactly as shown.
2. Tighten all bolts from steps 2 & 3 securely.
Figure 4 Place barstool upright on the floor.
** We recommend that you save the open wrench
(J) and
Allen wrench (K) and periodically tighten
all bolts. Please make sure all bolts are placed in
their proper positions and the
n are tightened
securely to ensure your safety.
Warning: to prevent injury, do
not insert fingers between the
seat and the frame.
** Weight restriction: 250 lbs.
** Intended for indoor use only.
C
E
D

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019