SEI BC401700TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
BC401700TX
Loring Entryway Storage Bench
Assembly Instructions
PO#:

Loring Entryway Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A
Quantity
of 1
Top Panel
B
Quantity
of 1
Left Side Panel
C
Quantity
of 1
Right Side Panel
D
Quantity
of 2
Middle Panel
E
Quantity
of 1
Bottom Panel
F
Quantity
of 1
Rear Cross Panel
G
Quantity
of 1
Front Cross Panel
H
Quantity
of 1
Front Apron Panel
I
Quant
ity
of 1
Back Panel
J
Quantity
of 1
Center
Support Leg
K
Quantity
of 3
Wicker Frame
L
Quantity
of 3
Wicker Bottom

M
Quantity
of 1
Cushion
1
Quantity
of 29
Cam Bolt
2
Quantity
of 29
Cam Lock
3
Quantity
of 18
Wood Dowel
Ø5/16”x1-1/2”L
4
Quantity
of 5
Screw Ø5/32”x1”L
5
Quantity
of 22
Screw Ø1/8”x1/2”L
6
Quantity
of 12
Adhesive Pad
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

“Please do not over tighten cam bolts,
please stop when you feel them tighten"
Figure 1
Insert cam locks (2) into holes on back
cross Panel (F).
Screw cam bolts (1) into holes on bottom
panel (E).
Attach rear cross panel (F) to bottom
panel (E) by inserting cam bolts (1) into
corresponding holes until panels meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Attach center support leg (J) to the bottom
panel (E) by hand.
Figure 2
Insert cam locks (2) into holes on middle
panel (D).
Screw cam bolts (1) into holes on bottom
panel (E).
Attach middle panel (D) to bottom panel
(E) by inserting cam bolts (1) and wood
dowels (3) into corresponding holes until
panels meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Cover cam locks (2) with adhesive pads
(6) provided.
LORING ENTRYWAY STORAGE BENCH
Assembly Instructions
( 2 )
(1)

Figure 3
Insert cam locks (2) into holes on bottom
panel (E), rear cross panel (F), and front
cross panel (G).
Screw cam bolts (1) into holes on side
panels (B) and (C).
Attach side panels (B) and (C) to bottom
panel (E), rear cross panel (F), and front
cross panel (G) by inserting cam bolts (1)
and wood dowels (3) into corresponding
holes until panels meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
Figure 4
Insert cam locks (2) into holes on
assembled unit as shown.
Screw cam bolts (1) into holes on front
apron panel (H).
Attach front apron panel (H) to assembled
unit by inserting cam bolts (1) into
corresponding holes until panels meet.
Tighten by rotating cam locks (2)
clockwise with Phillips screwdriver.
F
E

Figure 5
Insert cam locks (2) into holes on
assembled unit as shown.
Screw cam bolts (1) into holes on top
panel (A).
Attach top panel (A) to assembled unit by
inserting wood dowels (3), cam bolts (1),
and screws (4) into corresponding holes
until panels meet.
Tighten by rotating cam locks (2) and
screws (4) clockwise with Phillips
screwdriver.
Figure 6
Attach back panel (I) to assembled unit
with screws (5).
Tighten screws (5) with Phillips
screwdriver.

Figure 7
Attach the wicker bottoms (L) to wicker
frames (K).
Figure 8
Place wicker baskets into the
assembled unit.

Figure 9
Place the cushion (M) onto top panel (A).
Figure 10
Now your Loring entryway storage bench
is ready to use.

Please immediately examine this product carefully. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if
available, will be honored within this time frame.Parts will not be available for items arriving fully
assembled. We do not recommend modifying product(s) and we are not responsible for any
damages due to product modification(s). If damages or missing parts are not reported within 90
days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm
Mon-Fri Central time if you have product issues or email us at [email protected]. Please ask for
customer service representative for issues involving damages or replacement parts. Please ask for
technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4
Page11