SEI BC304400TX-COUNTRY OAK User manual

BC304400TX-COUNTRY OAK /
BC304900TX-BLACK
3-Drawre Country Bench
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
250
lb
M
ax
S
eat
L
oad
.
PO#
13112

BC304400TX-COUNTRY OAK / BC304900TX-BLACK
3-Drawer Country Bench
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Screws shown actual size.
Using a screw that is too long will cause damage. Before beginning assembly, separate
each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
A
Left Side Panel
B
Right Side Panel
C
Back Rail Panel
D
Bottom Panel
E
Back Panel
F
Front Panel
G
Side Apron
H
Drawer Front Panel
I
Drawer Side Panel
J
Drawer Rear Panel
K
Drawer Bottom Panel
L
Wood Glide
Quantity
Of 1 Quantity Of 1 Quantity
Of 1
Quantity
Of 1
Quantity
Of 2
Quantity
Of 1 Quantity
Of 1
Quantity
Of 2
Quantity
Of 3
3
Quantity
Of 3
Quantity
Of 3
Quantity
Of 6
Quantity
Of 3

1
Bolt 1/4”x 2-3/4”
2
Barrel Nut 1/4”
3
Dowel 5/16” x1-1/4”
4
Screw ∮ 5/32”x2”
5
Plastic Drawer Support
6
Screw ∮ 1/8”x1/2”
7
Screw ∮ 5/32”x1”
8
Right Plastic Support
9
Left Plastic Support
10
Plastic Drawer Stop
11
Wood Plug
12
Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call customer service at 1-800-633-5096
for assistance, questions, or Parts.
Assembly Tool Required
No.2 Phillips Screw Driver
Quantity
Of18
Quantity
Of 6 Quantity
Of 3
Quantity
Of 36 Quantity
Of 3
Quantity
Of 12
Quantity
Of 3
Quantity
Of 12
Quantity
Of 32
Quantity
Of 3
Quantity
Of 12 Quantity Of 1

BC304400TX-COUNTRY OAK / BC304900TX-BLACK
3-Drawer Country Bench
Assembly Instruction
Step 1:
Attach wood slide (L) to
bottom panel (D) by using
screw (4) and dowel (3) as
shown.
Step 2:
Attach plastic drawer
stopper (10), right plastic
support (8) and left plastic
support (9) to front panel (F)
by using screw (6) as
shown.

Step 3:
Insert dowel (3) to side
apron (G), back panel (E)
and front panel (F) as
shown.
Step 4:
Insert dowel (3) into bottom
panel (D) and attach drawer
frame to bottom panel (D) by
using screw (7) as shown.