SEI KA916000TX User manual

KA916000TX “MANILA”
3-DRAWER KITCHEN
STORAGE RACK For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
Assembly Instructions [email protected]
www.seidal.com

A. Left side frame Quantity
of 1
B. Right side frame Quantity
of 1
C. Top Iron frame Quantity
of 1
D.MetalTube Quantity
of 5
E. Bottom Metal Tube Quantity
of 2
F. DividerTube Quantity
of 2
G. Bottom shelf frame Quantity
of 1
H. Shelf frame Quantity
of 2
J. Woodpanel Quantity
of 2
K. Wood top panel Quantity
of 1
L. Rattan basket frame Quantity
of 3
M. Rattan bottom panel Quantity
of 3
1．Long Bolt Quantity
of 20
2．Bolt Quantity
of 12
3.Short Wood screw Quantity
of 12
1/2”L
4．AllenWrench Quantity
of 1
5．Wall brackets Quantity
of 2 6．Wall anchor Quantity of 2
7．Nylon restraint strap Quantity
of 2 8.Long Wood screw Quantity of 2
1”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
“
MANIL
A
” 3-DRAWER KITCHEN STORAGE RACK
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. Screws shown in actual size.
Using a screw that is too long will cause damage. Before beginning assembly, separate each
type of screw. Carefully study the screw diagrams below (SHOWN ACTUAL SIZE). You may
receive extra hardware with your unit.

Figure 1
Assembly Instructions:
Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that
you have all parts indicated on the front
page.
Please insert 2pcs Long bolt (1) through
holes on Side panel(A & B) to attach
1pcTop Iron frame (C) to Side frame(A &
B).
Insert 18pcs Long bolt (1) through holes
on Side frame(A & B) to connect 5pcs
Metal Tube (D) & 2pcs Divider Tube (F) &
2pcs Bottom Metal Tube(E) to side frame
(A & B).
Figure 2
Put 1pc wood top panel(K) onto the side
frame(A & B) & Top Iron frame(C) & Metal
Tube(D), Insert 4pcs Short Wood screw(3)
through holes on Top Iron frame(C) &
Metal Tube(D) to attach 1pc Wood top
panel (K) onto op Iron frame(C) & Metal
Tube(D) by Tool Required No.2 Phillips
Screwdriver (Not Included).
Put 2pcs wood panel(j) onto the Metal
Tube(D), Insert 8pcs short Wood screw(3)
through holes on Metal Tube(D) to attach
2pcs Wood panel (j) onto Metal Tube(D) by
Tool Required No.2 Phillips Screwdriver
(Not Included).
Place 1pc Bottom Shelf frame(G) onto
the Bottom Metal Tube(E).
Place 2pcs Shelf frame (H) onto the inner
frame of the rack to follow the indication
“MANILA” 3-DRAWER KITCHEN STORAGE RACK
Assembly Instructions

Figure 3
Put the rattan bottom panel (M) into rattan
basket (L), tighten them with Bolt (2) by
Tool Required No.2 Phillips
Screwdriver (Not Included).
“MANILA” 3-DRAWER KITCHEN STORAGE RACK
Assembly Instructions
Put the finished baskets（L&M）into rack
Figure 4
When properly installed. this hardware can
provide protection against the unexpected
tipping of furniture.
Drill 2pcs holes in wall, insert 2pcs wall
anchors(6) into hole in wall.
Insert 2pcs long wood screw(8) through
holes on Wall brackets(5) into wall
anchors(6) to attach wall brackets(5) onto
wall anchors(6).
Lace an end of the 2pcs nylon restraint
strap (7) down through bracket. bring both
ends together and slide the beaded end of
the strap through the key hole shaped slot
on the other end. pull down on the beaded
end until it snap-locks into the keyhole.
We'd love to hear from you! Email us photos of our products in your home at [email protected] and
we might feature it on our site or use it to model one of our inspirational photos.

Customer Service 1-800-633-5096
servic[email protected] Southern Enterprises Inc.
2915 Merrell Road
Dallas, Texas 75229
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If this
product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to
provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
StyleNo PartsLetter PartsDescription Quantity Needed
KA916000TX - Parts Replacement Form