SEI Langley WS150600TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]m
www.seidal.com
WS150600TX
Langley Decorative Mirror
Assembly Instructions
Page 1

Langley Decorative Mirror
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
1
Quantity
of 1
Mirror
A.
Quantity
of 4
Plastic Anchor
B.
Quantit
y
of 4
Screw Dia 7mm x 1-1/2”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 2

NOTE: No drilled hole or plastic anchor required when mounting
to stud. Use screw only. We do not supply hardware for mounting
on concrete walls.
Figure 1
Find a desired location and make
two markings for screws on the
wall.
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the marked screw
locations with a 3/16" drill bit.
Insert Plastic Anchor (A) into the
hole on wall as shown (When doing
this, you will need a hammer help
you).
Using a Phillips screwdriver, install
Screw (B) into the Anchor (A) the
other screw into the stud. Turn
Screw (B) until there is a gap of
approximately 3mm between the
head of the screw and the wall as
shown.
Figure 2
Hang the Langley Mirror onto the
Screws (B) and verify the Mirror is
resting securely on the mounting
screws.
Now your Langley Decorative
Mirror is ready to use.
Page3
Langley Decorative Mirror
Assembly Instructions
"The hole measurements on
the wall must match with the
hole measurements on back
of the unit"

If you prefer to hang this product in horizontal configuration, please follow below instructions.
NOTE: No drilled hole or plastic anchor required when mounting
to stud. Use screw only. We do not supply hardware for mounting
on concrete walls.
Figure 3
Find a desired location and mark
two locations for screws on the
wall.
One screw (for each unit) must be
attached directly into a wall stud.
Wall anchor is not needed when
mounting to wall stud.
Drill one of the marked screw
locations with a 3/16" drill bit.
Insert Plastic Anchors (A) into the
hole on wall as shown (When doing
this, you will need a hammer help
you).
Using the Phillips head
screwdriver, install Screw (B) into
the Anchor (A). Turn Screw (B)
until there is a gap of approximately
3mm between the head of the
screw and the wall as shown.
Figure 4
Hang the Mirror onto the Screws
(B) and verify the Mirror is resting
securely on the mounting screw.
Now your Langley Decorative
Mirror is ready to use.
Page 4
"The hole measurements on
wall must match with the
hole measurements on back
of the unit"

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for
customer service representative for issues involving damages or replacement parts. Please ask for
technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019