SEI CK622500TX User manual

CK622500TX
Nailhead End Table Trunk
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
Max top load 20 lb.
Max load inside trunk 20 lb .
PO#11
767

CK622500TX
Nailhead End Table Trunk
Parts List
Please review all parts and hardware before disposing of any packaging. Call
Customer Service if missing hardware. Do not return to store/retailer. Using a
screw that is too long will cause damage. Before beginning assembly, separate
each type of screw. Carefully study the screw diagrams below
(SHOWN ACTUAL SIZE).
A 1PC
Top
C 1PC
Back panel
E 1PC
Bottom panel
B 1PC
Front panel
D 2PCS
Side panel
F 4PCS
Leg

G 8PCS
Small Cam Screw
φ6.8 x 36mm
J 8PCS
Dowel φ8 x 30mm
M 1PC
Support
P 2PCS
Handle
H 8PCS
Small Cam Lock
φ15 x 12mm
K 8PCS
Bolts φ1/4” x 2-3/4”
N 1PC
Handle-A
Q 10PCS
Sponge Cushion
I1pc
Flat Wrench
L 31pcs
Screws φ3.5 x 16mm
O 1pc
Handle-B
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
The finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Assembly Tool Required
No.2 Phillips Screwdriver
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.

A
L
B
N
CK622500TX
Nailhead End Table Trunk
Assembly Instructions
Step 1
Put all parts on a soft surface
to prevent scratches, attach
handle-A (N) to the top (A) by
using screw (L) and phillips
screwdriver to tighten it as
shown
L
Step 2
B
G
I
O Attach handle-B (O) to front
panel (B) by using screw (L)
and phillips screwdriver to
tighten it as shown
Step 3
Screw small cam screw(G)
into front panel(B) as shown

J
B
G
D
D
H
Q
I
G
E
C
L
P
H
C
D
I
Step 4
Attach handle (P) to side panel
(D) by using screw(L) and
phillips screwdriver to tighten it
as shown
Step 5
Screw small cam screw(G)
into back panel (C)as shown
Step 6
Insert dowel(J) into to
side panel (D)as shown.
Then combining side panel(D),
front panel(B) , back panel(C)
and bottom panel(E) together
by using small cam screw (G)
small cam lock(H),dowel(J)
and sponge cushion (Q)as
shown.
Please make sure the edges
of bottom panel (E) are inserted
into groove of all panels.

F
K
Q
B
F
B
L
K
L
F
K
F
K
D
Step 7
Turn the trunk base up side
down and attach leg (F)to the
bottom of trunk by using
screw (K) as shown
Step 8
Attach Hinge (R) to Tack panel
(C) and top panel(A) by using
screws (L) as shown and then
tighten all screw by Phillips
screwdriver(not included)
Step 9
Open the top (A) ,attach support
(M) to the top (A) and trunk base
by using screw (L) as shown.
Then put sponge cushion(Q) on
front panel (B) as shown, close
the top and leave the top to drop
down slowly.
Noted: Please do not open the lid
all the way back.
.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019