SEI OC220500TX User manual

Page | 1
OC220500TX
Knox Accent Table
Assembly Instructions
PO:13570
For assistance with assembly, contact.
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Top supports up to lb.

Page | 2
OC220500TX
Knox Accent Table
Parts List
Please review all parts and hardware before disposing of any packaging.
Before beginning assembly, separate each type of hardware. Carefully study the diagrams below and check that you
have all parts indicated. Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.
1 1PC
Top Frame
2 1PC
Middle Shelf Frame
3 1PC
Bottom Shelf Frame
4 8PCS
Supports
5 4PCS
Legs
6 1PC
Glass Top
7 1PC
Glass Shelf
8 1PC
Mirror
A 12PCS
Screws
1/4”x1-1/4”
B 2PCS
Bolts 1/4”x1”
C 4PCS
End Caps
D 16PCS
Glass Pads
E 1PC
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.

Page | 3
OC220500TX
Knox Accent Table
Assembly Instructions
Figure 1
Step 1 :
Unit assembly should begin with
parts turned upside down for Step
1.
Attach Screws (A) to Top Frame
(1) and twist Screws (A)
clockwise to tighten them as
shown.
Note: Make sure you’re
inserting the Screws as they
are shown on Figure 1.
Figure 2
Step 2:
Attach Supports (4) to Top Frame
(1) onto attached Screws (A)
from Step 1.
Attach Screws (A) onto the two
right Supports attached to Top
Frame (1) and two additional
Screws (A) onto the left side of
Middle Shelf Frame (2).
Attach Middle Shelf Frame (2)
onto Supports (4) from Top
Frame (1).Secure with Screws
Bolts (B). Screw Supports (4)
onto Middle Shelf Frame (2)
Please make sure the labels
marked BOTTOM under the
Shelf Frames (2) are facing
upward.

Page | 4
Figure 3
Step 3:
Attach Screws (A) to Supports
(4), then, attach Bottom Shelf
Frame (3) and Legs (5) to
Screws (A).
Attach End Caps (C) to Legs
(5) as shown.
Figure 4
Step 4:
Turn the assembled parts
upright.
Attach Glass Pads (D) to
brackets of Top Frame (1),
Middle Shelf Frame (2) and
Bottom Shelf Frame (3).
Place Glass Top (6) to Top
Frame (1), Insert Glass Shelf
(7) to Middle Shelf Frame (2)
and place Mirror (8) to Bottom
Shelf Frame (3) as shown.
Now, your Knox accent table is
ready to use.

Page | 5
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form