Seiko Pulsar 7T32 User manual

INSTRUCTIONS (P. 3)
INSTRUCTIONS (P. 24)
INSTRUCCIONES (P. 45)
BEDIENUNGSANLEITUNG (S. 66)
ISTRUZIONI (P. 87)
INSTRUÇÕES (P. 109)
用法説明 (130 頁)
Cal. 7T32
7T32

English
2
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T32. For best results,
please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. 7T32. Pour obtenir
d’excellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que
vous conserverez pour toute référence ultérieure.
Enhorabuena por su adquisición de un reloj SEIKO analógico de cuarzo Cal. 7T32. Para óptimo
resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este
manual para consulta posterior.
Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 7T32. Bitte lesen Sie diese Bedienungsan-
leitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 7T32. Per ottenere i migliori
possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima
di utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per
ogni qualsiasi eventuale futuro riferimento.
Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. 7T32. Para obter
os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o
seu Relógio SEIKO Quartz Análogo. Queira conservar este manual para referências futuras.

English
3
ENGLISH
CONTENTS
Page
FEATURES .................................................................................................................. 4
DISPLAY AND CROWNS/BUTTONS .......................................................................... 5
DATE SETTING ........................................................................................................... 6
TIME SETTING ............................................................................................................ 7
ALARM ....................................................................................................................... 8
STOPWATCH .............................................................................................................. 11
TACHYMETER ............................................................................................................ 14
ADJUSTING THE HAND POSITION ............................................................................ 16
RESETTING THE BUILT-IN IC ..................................................................................... 17
BATTERY LIFE INDICATOR ........................................................................................ 18
BATTERY CHANGE ..................................................................................................... 18
TO PRESERVE THE QUALITY OF YOUR WATCH ...................................................... 19
SPECIFICATIONS ........................................................................................................ 23

English
4
SEIKO ANALOGUE QUARTZ
Cal. 7T32
FEATURES
TIME/CALENDAR STOPWATCH
● Hour & minute hands with small
second hand
● Date displayed in numerals
● Measures up to 30 minutes in 1/5
second increments.
● Can measure repeatedly up to 6
hours.
TACHYMETER
● For models with tachymeter scale
ALARM
● Can be set on a 12-hour basis
with small alarm hands.

English
5
DISPLAY AND CROWNS/BUTTONS
There are three buttons and two crowns.
STOPWATCH 1/5 second handSTOPWATCH minute hand
Minute hand
(MAIN TIME)
ALARM
1
2
3
9
10
11
5
25
30
10
20
MIN
.
12
8
7
6
5
4
a b c
Hour hand
(MAIN TIME)
Second hand
(MAIN TIME)
a b c
ALARM hour hand ALARM minute hand
Date
a: Normal position b: First click c: Second click
B
C
A
CROWN 1
CROWN 2

English
6
Pull out to first click .
Turn clockwise until the date for
the previous day appears.
Pull out to
second click and turn
until the desired date appears.
Push back in to
normal position .
1
2
3
4
▼
▼
▼
➡
➠
3
➠
4
Date
1 Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise, the date may not
change properly.
* If it is necessary to set the date during that time period, first change the time to any time outside
this period, set the date and then reset the correct time.
2 It is necessary to adjust the date at the end of February and 30-day months.
➠
DATE SETTING
1
2
1
NOTES
CROWN 1
CROWN 1

English
7
Pull out to second click when
Second hand is at the 12 o’clock
position.
Turn to set Hour and Minute
hands.
Push back in to
normal position
in accordance with a time signal.
Minute hand
TIME SETTING
1 When setting Hour hand, check that AM/PM is correctly set.
* The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12
o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the date
changes, the time is set for the A.M. period. If the date does not change, the time is set for
the P.M. period.
2 When setting Minute hand, advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
Second hand
Hour hand
1
2
3
▼
▼
➠
1
15
30
45
60
➠
2
3
NOTES
CROWN 1
CROWN 1

English
8
ALARM
●Alarm time is set on a 12-hour basis.
●ALARM hands move independently of MAIN TIME hands.
Minute hand
(MAIN TIME)
1Pull out to
second click .
Turn clockwise or counterclockwise
to set ALARM hands to the current
time (MAIN TIME).
Push back in to
normal position .
2
3
▼
▼
▼
•After the main time is adjusted, follow the procedure below, and then set the
alarm.
*The following procedure is necessary only after the main time is adjusted.
1 Adjustment of ALARM hands
ALARM SETTING
ALARM
1
2
3
4
5
6
7
8
9
10
11
12
Hour hand
(MAIN TIME)
➠
1
ALARM
hour hand
➠
3
ALARM
minute hand
2
CROWN 2
CROWN 2

English
9
2 Alarm time setting
▼Press to set ALARM hands to
the desired alarm time.
▼Push back in to
normal posi-
tion
.
Pull out to
first click .
*Once ALARM hands are adjusted to the main time, alarm time setting can be made only by
following the procedure below.
ALARM
1
2
3
9
10
11
12
4
5
6
7
8
➠
➠
1 When setting ALARM minute hand to the current time in , advance it 4 to 5
minutes ahead of the desired time and then turn it back to the exact minute.
2 Alarm hands move quickly if Button C is kept pressed.
3 If CROWN 2 is pulled out to first click within 1 minute after being pushed back in
to normal position in
3 , the alarm sounds.
NOTES
CROWN 2
C
CROWN 2
C
CROWN 2
2

English
10
ALARM ENGAGEMENT/DISENGAGEMENT
• Alarm engagement • Alarm disengagement
Push back in to normal
position
.
Pull out to first click .
Current time
1 Alarm rings at the designated time for 20 seconds.
* To stop it manually, press Button A, B or C, or push CROWN 2 back in to normal position.
2 If CROWN 2 is pulled out to second click, the designated alarm time is canceled
with a warning beep.
* In that case, set ALARM hands to MAIN TIME again, push CROWN 2 back in to normal position,
and then, pull it out to first click and set the desired alarm time again. However, if CROWN 2
is pushed back in to normal position before the warning beep stops, the designated alarm time
will not be canceled.
ALARM
1
2
3
9
10
11
12
4
5
6
7
8
➠
Designated
alarm time
ALARM
1
2
3
9
10
11
12
4
5
6
7
8
[Alarm engaged]
NOTES
➠
[Alarm disengaged]
CROWN 2CROWN 2

English
11
●Stopwatch measures up to 30 minutes in 1/5 second increments.
●After 30 minutes, it will start counting again from “0” repeatedly up to 6 hours.
STOPWATCH
STOPWATCH
minute hand
• Before using the stopwatch:
• Check that CROWNS 1 and 2
are set at normal position.
• Press Button B to reset STOP-
WATCH hands to “0” position.
* If the hands do not return to “0”
position, follow the procedure in
“ADJUSTING THE HAND POSI-
TION” (page 16).
STOPWATCH OPERATION
STOPWATCH
1/5 second hand
MIN.
5
25
10
20
30
CROWN 1
CROWN 2
BA

English
12
1 Standard measurement
START STOP RESET
START SPLIT
RELEASE
STOP
SPLIT
* Measurement and release of split time can be repeated by pressing Button B.
RESET
3 Split time measurement
2 Accumulated elapsed time measurement
START RESTART STOP STOP RESET
* Restart and stop of stopwatch can be repeated by pressing Button A.
AAB
A
BBAB
BA
A
AAAB
▼
▼
▼
○○○
▼
▼ ▼
▼
▼ ▼
○○○
▼

English
13
START RESET
4 Measurement of two competitors
2ND
COMPETITOR
FINISHES
FINISH TIME
OF 1ST
COMPETITOR
FINISH TIME
OF 2ND
COMPETITOR
1 If CROWN 1 is pulled out to second click, STOPWATCH hands are reset to “0”
position.
2 If CROWN 2 is pulled out to first or second click, STOPWATCH hands are reset to
“0” position.
3 When stopwatch has been reset and Button A is pressed before the hands reach
“0” position, stopwatch still starts counting when Button A is pressed.
NOTES
ABA BB
▼ ▼
▼
▼

English
14
TACHYMETER
(for models with tachymeter scale on the dial)
* Tachymeter scale can be used only when the time required is less than 60 seconds.
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or miles
and STOPWATCH second hand indicates “90” on tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
To measure the hourly average speed of a vehicle
Use the stopwatch to determine
how many seconds it takes to go
1 km or 1 mile.
1
Tachymeter scale indicated by
STOPWATCH second hand gives
the average speed per hour.
2
Ex. 1Ex. 1
STOPWATCH
second hand:
40 seconds
Tachymeter scale: “90”
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
MIN.
5
25
30
10
20

English
15
To measure the hourly rate of operation
Use the stopwatch to measure
the time required to complete 1
job.
1
Tachymeter scale indicated by
STOPWATCH second hand gives
the average number of jobs ac-
complished per hour.
2
STOPWATCH
second hand:
20 seconds
Tachymeter scale: “180”
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 1Ex. 1
Ex. 2: If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
MIN.
5
25
30
20
10

English
16
ADJUSTING THE HAND POSITION
▼Pull out to
second click .
Press repeatedly to reset
STOPWATCH minute hand to
the 12 o’clock position.
▼Press repeatedly to reset
STOPWATCH second hand to
the 12 o’clock position.
▼Push back in to
normal posi-
tion
.
●If STOPWATCH hands will not return to the 12 o’clock position when the stopwatch is
reset or when the battery is replaced with a new one, follow the procedure below.
1 Hands move quickly if the respective buttons are kept pressed.
2 After adjusting the hand position, set the main time.
MIN.
5
25
30
20
10
➠
➠
NOTES
CROWN 1
CROWN 1
A
BA
B
CROWN 1

English
17
RESETTING THE BUILT-IN IC
●In case any of the hands should move improperly, follow the procedure below to adjust
the hand movement.
Pull out to second click .
AND Press simultaneously.
Push back in to normal posi-
tion
.
▼
▼
5
25
30
10
20
MIN.
➠
➠
NOTE
Before using the watch again, be sure to adjust the position of STOPWATCH hands and
set the main time and alarm.
CROWN 1
CROWN 1
AB
CROWN 1
BA

English
18
BATTERY LIFE INDICATOR
CAUTION
Do not remove the battery from the watch. If it is necessary to take out the
battery, keep it out of the reach of children. If a child swallows it, consult a
doctor immediately.
●When the battery nears its end, the small second hand moves at two-second intervals
instead of normal one-second intervals to indicate that the battery needs to be replaced
with a new one.
* If the alarm is used while the second hand is moving at two-second intervals, the watch
may stop operating. Therefore, if you see the second hand moving at two-second intervals,
replace the battery with a new one as soon as possible.
BATTERY CHANGE
The miniature battery which powers your watch should last approximately
2 years. However, because the battery is inserted at the factory to check
the function and performance of the watch, its actual life once in your
possession may be less than the specified period. When the battery
expires, be sure to replace it as soon as possible to prevent any malfunction.
For battery replacement, we recommend that you contact an AUTHORIZED
SEIKO DEALER and request SEIKO SR927W battery.
2
Years

English
19
TO PRESERVE THE QUALITY OF YOUR WATCH
Condition
of use
WATER
RESISTANT
5 BAR
WATER
RESISTANT
No indication
Indication on
case back
Non-water
resistant
Degree
of water
resistance*
Accidental
contact with
water such
as rain and
splashes
Swimming,
yachting and
taking a
shower
No No No No
Yes No No No
Yes Yes No No
Yes Yes Yes No
WATER
RESISTANT
10/15/20 BAR
Scuba
diving**
and
saturation
diving
Taking a bath
and shallow
diving
■WATER RESISTANCE
3 bar
5 bar
10/15/20 bar

English
20
●Non-water resistant
• If the watch becomes wet, have it
checked by an AUTHORIZED SEIKO
DEALER or SERVICE CENTER.
●Water resistant 5/10/15/20 bar
• Before using in water, be sure the
crowns are pushed in completely.
• Do not operate the crowns and buttons
when the watch is wet or in water.
If used in sea water, rinse the watch in
fresh water and dry it completely.
5 bar WR
• When taking a shower with the water resistant 5
bar watch, or taking a bath with the water resistant
10, 15 or 20 bar watch, be sure to observe the
following:
* Do not operate the crowns or push the buttons
when the watch is wet with soapy water or
shampoo.
* If the watch is left in warm water, a slight time
loss or gain may be caused. This condition,
however, will be corrected when the watch
returns to normal temperature.
10/15/20
bar WR
* Pressure in bar is a test
pressure and should not be
considered as corresponding
to actual diving depth since
swimming movement tends
to increase the pressure at a
given depth. Care should
also be taken on diving into
water.
** We recommend that you
wear a SEIKO Diver’s Watch
for scuba diving.