SEM Ergo IP-10 User manual

Website: www.semaudiolabs.com
Email: [e-mail]
QUICK START GUIDE
ERGO: iP-10

CONTENTS:
x7
SET UP:
Welcome to the S.E.M. Audio Laboratories community. Thank you for selecting one of our
milestones and embracing a lifestyle choice of quality and design. This quick start guide will
get you up and running quickly. For more information about this and other products, please
refer to the extended guide or visit www.semaudiolabs.com.
The following items can be found inside your product gift box.
- Main unit - Remote Control - iPod Docking Cavity - Power Adaptor
Follow the below steps to get started.
- Unit
Plug the tail end of the adapter into the DC-Jack (socket) on the side of the unit. Insert the plug of the AC-adaptor into the
wallAC-socket.
This unit is designed to be “On” or in “Standby Mode” at all times. During standby, the unit focuses on being
environmentally friendly through minimal electricity usage and consumes less the 2W of power.
- Remote
The remote comes with a battery built-in from the get-go. Gently pull out the plastic ‘Tab’ from the battery compartment
at the rear of the remote to begin wireless communication between the remote and unit.

*For extended details and additional functions, please refer to the instruction manual accompanied with the unit.
SET CLOCK TIME & ALARM:
It is important to first set the clock time, which shall be essential when utilizing the alarm timer feature.
To set the time, switch the unit to “Standby” mode (display light dimmed) and press the ‘Clock Adj’ key to display
time setting input options.
Use the navigational, ‘next/back’, and ‘Clock Adj’ keys to select and input the clock time options.
Now press and hold the ‘Alarm’ key until THE ALARM SYMBOL" " APPEARS IN THE DISPLAY.
Use the navigational, ‘next/back’, and ‘Alarm’ keys to select and input the Alarm Timer and wake-up source
playback options.
iPod:
Connect and Turn on both the unit and the iPod.
Use the Play/Pause, Next and Previous keys to control playback from the iPod
Use the menu key to navigate the available iPod menu's (such as playlist, artist song, video or others depending on
your iPod). Use the “navigational” key's to scroll within menu's and submenu's. Then press the 'enter' key to confirm
highlighted selection.
FM iPod AUX
KEY CONTROLS:
Use the Function key to toggle between different sources from which you would like to have desired playback.
- FUNCTION KEY