Sena AGV Remote Control User manual

Installation
200 220
180
160
140
120
100
80
60
40 20 1
240
260
Note! If your handlebar requires better grip for
holding the RC4 in place, apply the rubber band
around the handlebar.
Replacing the battery
70 ~ 100%
30 ~ 70%
0 ~ 30%
70% › 100%
30% › 70%
0% › 30%
Battery check
Power On
Power On
Center
Button
Deep Sleep
(+)
Button
+
Center
Button
Power On/Off
3"
Bluetooth®pairing
pairing
"Remote control pairing"
AGV
Remote Control
AGV
Intercom
Note! You can control the AGV intercom using the
Remote control only if they are paired. The AGV
Remote Control supports AGV headsets with
Bluetooth®4.1 or higher.
8"
Button operation and feedbacks
Tap (*)Double tap (*)Press for n" (*)
1"
Audio feedback: voice message from
the earphones (*)
Visual feedback: LED flashes
(*)An audio feedback ("Beep") follows each impulse
(+)
Button
Note! To complete the connection, refer to the
AGV intercom User manual.

+ +
To control your AGV intercom using the AGV Remote
Control, please refer to the intercom's Quick Start Guide
to manage phone, music, communication and other
functionalities.
Remote Control
Remove the plastic tape from the battery slot to
begin using the AGV Remote Control.
Getting started
Dainese S.p.A.
Via Louvigny, 35
36060 Colceresa (VI)
Italy
ph: [phone]
fax: [phone]
www.agv.com
Factory reset
(+)
Button Center
Button (-)
Button
AGV intercom control
Battery
slot
(-) Button
(+) Button
Multifunction
Button
Center Button
LED
3"
Remote_Control_QSG_ENG_20190315
Note! The buttons (-), Center and (+) replicate
the AGV intercom functionalities through the
same operating logic.
Overview
Quick start guide